Amplified Electrochemical DNA Sensor Based on Polyaniline Film and Gold Nanoparticles

In this work, an electrochemical DNA biosensor, based on a dual signal amplified strategy by employing a polyaniline film and gold nanoparticles as a sensor platform and enzyme‐linked as a label, for sensitive detection is presented. Firstly, polyaniline film and gold nanoparticles were progressively grown on graphite screen‐printed electrode surface via electropolymerization and electrochemical deposition, respectively. The sensor was characterized by scanning electron microscopy (SEM), cyclic voltammetry and impedance measurements. The polyaniline‐gold nanocomposite modified electrodes were firstly modified with a mixed monolayer of a 17‐mer thiol‐tethered DNA probe and a spacer thiol, 6‐mercapto‐1‐hexanol (MCH). An enzyme‐amplified detection scheme, based on the coupling of a streptavidin‐alkaline phosphatase conjugate and biotinylated target sequences was then applied. The enzyme catalyzed the hydrolysis of the electroinactive α‐naphthyl phosphate to α‐naphthol; this product is electroactive and has been detected by means of differential pulse voltammetry. In this way, the sensor coupled the unique electrical properties of polyaniline and gold nanoparticles (high surface area, fast heterogeneous electron transfer, chemical stability, and ease of miniaturisation) and enzymatic amplification. A linear response was obtained over a concentration range (0.2–10 nM). A detection limit of 0.1 nM was achieved.     

A computational investigation of the electronic properties of Octahedral Al n N n and Al n P n cages (n = 12, 16, 28, 36, and 48)

Density functionla theory (DFT) calculations are performed to characterize geometric and electronic features of the octahedral Al _n N _n and Al _n P _n cages (n = 12, 16, 28, 32, and 48). Toward this aim, ¹⁵N, ²⁷Al, and ³¹P chemical shielding (CS) tensors as well as natural charge analyses are calculated for the optimized structures. CS parameters detect three distinct electronic environments for atoms within the Al _n N _n and Al _n P _n cages. The chemical shifts of N2 sites belonging to a hexagon and surrounded by three hexagons and a square obtained are different from those of N3 sites belonging to a hexagon that is surrounded only by hexagons—due to different curvatures exerted at the sites with different local structures. In addition, there is an increasing tendency in the Δσ values of the three local structures, Δσ (N1) > Δσ (N2) > Δσ (N3), N1 sites belonging to four-membered rings. The chemical shieldings of those Al and P sites belonging to a hexagon that is surrounded only by hexagons in the cages (360.7–366.7 and 496.5–514.7 ppm) are close to those previously reported for AlP nanotubes. Three distinct electrostatic environments around the N, Al, and P nuclei are also confirmed by the calculated natural charges. It should be noted that the positively charged Al atoms on the cages turn out to be the available sites for adsorption of H2 molecules.     

pTSA-catalyzed condensation of xylenols and aldehydes under solvent-free conditions: One-pot synthesis of 9H-xanthene or bisphenol derivatives

A simple and efficient procedure for the synthesis of 9H-xanthene or bisphenol derivatives has been developed by one-pot condensation of xylenols with aromatic aldehydes in the presence of p-toluenesulfonic acid (pTSA) as a catalyst under solvent-free conditions at 100 °C. It is noteworthy that the condensation reaction of 3,5-xylenol with aldehydes produces 9H-xanthene derivatives, while the reaction with other xylenols leads to the corresponding bisphenol derivatives. Different types of aromatic aldehydes are used in the reaction and in every case the products were obtained in good to excellent yields. The structures of these compounds were established on the basis of IR, ¹H NMR, ¹³C NMR and CHN data.     

Lanthanum-selective sensors based on 3-amino-2-mercapto-3H-quinazolin-4-one in PVC matrix

A new solvent polymeric membrane (PME) and coated graphite (CGE) electrodes based on 3-amino-2-mercapto-3H-quinazolin-4-one as a suitable carrier for La(III) ion are described. The sensors exhibited a Nernstian response for La(III) ion over a wide concentration range (3.0 × 10^?7 to 1.0 × 10^?1 M for PME and 1.0 × 10^?7 to 1.0 × 10^?1 M for CGE) with a slope of 20.1 ± 0.3 (PME) and 23.4 ± 0.4 (CGE) mV decade^?1. The lower detection limits by PME and CGE were 2.0 × 10^?7 and 7.1 × 10^?8 M, respectively. The potentiometric response of the proposed electrodes was independent of the pH of the test solution in the pH range 3.0–9.0 with a fast response time (<10 s). The applications of prepared sensors were demonstrated in the determination of lanthanum ions in spiked water sample and also utilized for indirect determination of fluoride content of two mouth wash preparation samples.     

Convenient Synthesis of 14‐Aryl‐14‐H‐dibenzo[a,j]xanthenes Catalyzed by Acyclic Brønsted Acidic Ionic Liquid [H—NMP]+[HSO4]− under Microwave Irradiation

Efficient method for direct preparation of 14‐aryl‐14‐H‐dibenzo[a,j]xanthenes through condensation of β‐naphthol with various aromatic aldehydes in the presence of the catalytic amount of [H—NMP]⁺[HSO₄]^? under microwave irradiation was described. This method has the advantages such as; very easy reaction workup, absolute separation of catalyst from the reaction mixture and smooth recyclability of catalyst. In this reaction 14‐aryl‐14‐H‐dibenzo[a,j]xanthenes were obtained as desired products in excellent yields and short reaction times via green and one‐pot procedure.     

Determination of Hg(II) in Environmental Water Samples Using DLLME Method Prior to GC-FID

Mercury exists in two forms in environment, inorganic salts and organic compounds. Determination of mercury is very important, due to its health effects. In the present research, diphenylation of mercury using phenylboronic acid as a derivatization reagent was used for the determination of Hg(II) in real water samples. A simple, rapid and cheap method named dispersive liquid–liquid microextraction was used for the extraction of analyte under the following conditions: extraction solvent 16 μL of carbon tetrachloride, disperser solvent 1 mL of ethanol and sample volume 5 mL. Under the optimal conditions, the enrichment factor for diphenylmercury was 931 and the limit of detection calculated on the basis of five replicates was 0.004 μg mL^?1. The repeatability of the method expresses as relative standard deviation was 5.1 (n = 6). The linear range was between 0.01 and 10 μg mL^?1. The performance of the proposed technique was evaluated for the determination of mercury in different environmental water samples.     

Synthesis of Novel Organosilicon Compounds Possessing Fully Substituted Imidazole Nucleus Sonocatalyzed by Fe-Cu/ZSM-5 Bimetallic Oxides

An efficient four-component synthesis of 1,2,4,5-tetrasubstituted imidazoles is described by one-step condensation of an aldehyde, benzil, ammonium acetate, and primary aromatic amine with nanostructure Fe-Cu/ZSM-5 bimetallic oxides in water under ultrasonic irradiation. The short reaction time, good yields, environmental friendly procedure, mild reaction conditions, and convenient operation are important advantage of this protocol. The products generated during the study have been utilized as substrates for synthesis of organosilicon-containing imidazoles. Synthesis of tris(triorganosilyl)methylimidazole derivatives were carried out using organolithium reagent (Me₃Si)₃CLi, prepared via metalation of (Me₃Si)₃CH with methyllithium in tetrahydrofuran, in excellent yields.     

Oxidation of 1,4-Dihydropyridines under Mild and Heterogeneous Conditions

A combination of NaHSO₄.H₂O and NaNO₂ in the presence of wet SiO₂ was used as an effective oxidizing agent for the oxidation of dihydropyridines to their corresponding pyridine derivatives at room temperature with excellent yields.     

Synthesis of Functionalized Pyrroles by Reaction of 3,4‐Diacetylhexane‐2,5‐dione with Primary Amines in Water

3,4‐Diacetylhexane‐2,5‐dione (tetra‐acetylethane) undergoes a complex reaction with primary amines in boiling water to produce N‐alkyl‐3‐acetyl‐2,5‐dimethylpyrroles, together with small quantities of N‐alkyl‐3,4‐diacetyl‐2,5‐dimethylpyrroles and 2,5‐dimethyl‐1H‐pyrrol‐3‐yl‐vinyl‐acetamides. When the reaction was carried out in methanol at room temperature, the yields of the latter products increased.     

Synthesis of Diaryl Ethers Through the Copper-Catalyzed Arylation of Phenols with Aryl Iodides Using KF/Al2O3

An efficient synthesis of diaryl ethers by the copper-catalyzed arylation of phenols with a variety of aryl iodide susing KF/Al₂O₃ as a suitable base and CuI and 1,3 diphenyl-1,3 propandione as the catalyst is described.