Thermal decomposition of the vivianite arsenates—implications for soil remediation

The presence of arsenate compounds in soils and mineral dump leachates is common. One potential method for the removal of the arsenates from soils is through thermal treatment. High-resolution thermogravimetric analysis has been used to follow this thermal decomposition of selected vivianite arsenates. This decomposition occurs as a series of steps. The first two steps involve dehydration with 6 mol of water lost in the first step and two in the second. The third major weight loss step occurs in the 750-800 °C temperature range with de-arsenation. The application of infrared emission spectroscopy confirms the loss of water by around 250 °C and the loss of arsenic as arsenic pentoxide is observed by the loss of AsO stretching bands at around 826 cm⁻¹. Thermal activation of arsenic contaminated soils may provide a method of decontamination.     

NIR spectroscopy of jarosites

Near-infrared (NIR) spectroscopy has been used to analyse a suite of synthesised jarosites of formula Mn(Fe3+)6(SO4)4(OH)12 where M is K, Na, Ag, Pb, NH4+ and H3O+. Whilst the spectra of the jarosites show a common pattern, differences in the spectra are observed which enable the minerals to be distinguished. The NIR bands in the 6300-7000 cm-1 region are attributed to the first fundamental overtone of the infrared and Raman hydroxyl stretching vibrations. The NIR spectrum of the ammonium-jarosite shows additional bands at 6460 and 6143 cm-1, attributed to the first fundamental overtones of NH stretching vibrations. A set of bands are observed in the 4700-5500 cm-1 region which are assigned to combination bands of the hydroxyl stretching and deformation vibrations. The ammonium-jarosite shows additional bands at 4730 and 4621 cm-1, attributed to the combination of NH stretching and bending vibrations. NIR spectroscopy has the ability to distinguish between the jarosite minerals even when the formula of the minerals is closely related. The NIR spectroscopic technique has great potential as a mineral exploratory tool on planets and in particular Mars.     

Thermal decomposition of natural and synthetic plumbojarosites: Importance in ‘archeochemistry’

Plumbojarosite and argentoplumbojarosite were sources of lead and silver in ancient and medieval times. The understanding of the chemistry of the thermal decomposition of these minerals is of vital importance in ‘archeochemistry’. The thermal decomposition of plumbojarosite was studied using a combination of thermogravimetric analysis coupled to a mass spectrometer. Three mass loss steps are observed at 376, 420 and 502 °C. These are attributed to dehydroxylation, loss of sulphate occurs at 599 °C, and loss of oxygen and formation of lead occurs at 844 and 953 °C. The temperatures of the thermal decomposition of the natural jarosite were found to be less than that for the synthetic jarosite. This is attributed to a depression of freezing point effect induced by impurities in the natural jarosite. Raman spectroscopy was used to study the structure of plumbojarosite. Plumbojarosites are characterised by stretching bands at 1176, 1108, 1019 and 1003 cm⁻¹ and bending modes at 623 and 582 cm⁻¹. Changes in the molecular structure during thermal decomposition were followed by infrared emission spectroscopy. The technique shows the loss of intensity in the hydroxyl stretching region attributed to dehydroxylation. Loss of sulphate only occurs after dehydroxylation. Lead is formed at higher temperatures through oxygen evolution.     

Concept of improved rigidity: how to make enantioselective hydrophosphonylation of cyclic imines catalyzed by chiral heterobimetallic lanthanoid complexes almost perfect

The catalytic and enantioselective hydrophosphonylation of cyclic imines using cyclic phosphites is described for the first time. In contrast to the application of acyclic phosphites, significant improvements are presented arising from the concept of improved rigidity by utilization of cyclic phosphites in the lanthanoid BINOL complex catalyzed hydrophosphonylation of 3-thiazolines. Cyclic phosphites are shown to provide certain improvements within the catalytic cycle. Influence of parameters such as concentration of the catalyst and the phosphite on the catalysis is examined as well as the effects of the substituents on the starting material. The pharmacologically interesting thiazolidinyl phosphonates are synthesized in excellent optical purities of up to 99% ee and high chemical yields of up to 99%. The required amount of catalyst is reduced to 2.5 mol %. The highest efficiency of the reaction involving cyclic phosphites is achieved using the catalytic system "2.5 mol % (S)-YbPB/2.5 equiv phosphite/50 degrees C/48 h/THF-toluene (1:7)". On the basis of the results a refinement of the proposed catalytic cycle has been provided. For comparison cyclic phosphites were used in hydrophosphonylation with a chiral titanium catalyst.     

Determination of saccharides by high performance anion-exchange chromatography with pulsed amperometric detection

Summary High performance anion-exchange chromatography (HPAC) coupled with pulsed amperometric detection (PAD) under alkaline conditions (pH 13) separates neutral saccharides based upon their molecular size, saccharide composition, and glycosidic linkages. Carbohydrates were detected by oxidation with a gold-working electrode. HPAC-PAD was compared to high performance liquid chromatography (HPLC) with refractive index (RI) detection in terms of selectivity and sensitivity of saccharides. The results indicate that HPAC-PAD was more precise, two orders of magnitude more sensitive (pmol range) and gives better resolution of saccharides than HPLC-RI. HPAC-PAD required less sample preparation and was not subjected to matrix interferences. The use of HPAC-PAD was applied to the analysis of organic materials (plant residues, animal wastes and sewage sludge) and soil.     

Template-aluminosilicate structures at the early stages of zeolite ZSM-5 formation. A combined preparative, solid-state NMR, and computational study

Species at three stages in the self-assembly of zeolite ZSM-5 have been studied with one- and two-dimensional magic-angle-spinning 13C, 27Al, 29Si, and 1H NMR spectroscopy and compared with the earlier proposed structures: (1) precursor species containing 33-36 T sites around a tetrapropylammonium (TPA) cation, (2) nanoslabs consisting of a flat 4 x 3 array of such precursors, and (3) the final TPA-ZSM-5 zeolite. Synthesis was carried out in D2O to suppress the water and silanol protons. Under such conditions, the effective Si-H and Al-H distances measured with 29Si-{1H} and 27Al-{1H} rotational echo double resonance (REDOR) reflect the interactions between TPA cations and the surrounding aluminosilica. The 29Si-{1H} REDOR curves for Q4-type silicon atoms at the three mentioned stages are closely similar, as well as the observed 27Al-1H REDOR curve for the precursor species compared to that for the TPA-ZSM-5. This indicates that in addition to externally attached TPA, there is also internal TPA already incorporated at an early stage into the aluminosilicate in a similar way as in the final zeolite, in accordance with the earlier proposed MFI self-assembly pathway (Kirschhock et al. Angew. Chem. Int. Ed. 2001, 40, 2637). However, the effective distances extracted from the initial REDOR curvatures are significantly (10-15%) larger than those computed for the model. Since there is no temperature effect, we tentatively assign this difference to a reduction of the 29Si-1H and 27Al-1H interactions by multispin decoherence effects or self-decoupling caused by proton spin diffusion. By assuming the computed model distances and fitting Anderson-Weiss curves to the observed REDOR data, we obtain similar "decoherence times" in the order of 0.1 ms. The observed 29Si-{1H} REDOR dephasing for the Q3 sites in the precursors is significantly faster than that for the Q4 sites. This is tentatively ascribed to a partial deuteron-proton back exchange at the silanol positions.     

Synthesis of New 4-Thiazolidinylphosphonates via Stereoselective Pudovik Reaction

Diastereomeric pure phosphite anions 2 adds to the C=N bond of 3-thiazolines 3 to give the corresponding derivatives 4 of the pharmacological active 4-thiazolidinylphosphonates 1 via Pudovik reaction.     

Enantioselective Addition of Diethylzinc to Aromatic Aldehydes Catalysed by Chiral Ligands Derived from L-Hydroxyproline

The Lithium salts of chiral auxiliaries 2–4 derived from L-Hydroxyprolin (2S, 4R)-1 catalysed the enantioselective addition of diethylzinc to aromatic aldehydes to afford sec alcohols in up to 80% optical purity.     

Hexakis(adamantyltrimethylammonium) cyclooctasilicate tetratetracontahydrate

The title compound, 6C₁₃H₂₄N⁺·H₂Si₈O₂₀⁶⁻·44H₂O, belongs to the class of cyclosilicate hydrates, which structurally can be positioned between the zeosils and the clathrate hydrates. [Si₈O₁₈(OH)₂] cubes carrying six negative charges are located on crystallographic inversion centres and are surrounded by six adamantyltrimethylammonium cations.