Enantioselective Catalysis CXLI [1]. Tridentate Ligands with 1-(Pyridin-2-yl)ethylamine as Chiral Building Block in the Enantioselective Transfer Hydrogenation of Acetophenone

Summary.  A series of novel tridentate ligands with nitrogen and oxygen donor sites was synthesized starting from enantiomerically pure (S)- and (R)-1-(pyridin-2-yl)ethylamine, the preparation and resolution of which was developed. The new optically active ligands were tested as in situ catalysts together with Ru(PPh₃)₃Cl₂ in the enantioselective transfer hydrogenation of acetophenone with isopropanol. The secondary amine ligand (S)-2,4-di-tert-butyl-6-(1-(pyridin-2-yl)ethylamino)methylphenol gave the best results with almost quantitative conversion and 47%ee. Received August 17, 2001. Accepted August 27, 2001     

The infrared spectra (600-150 cm−1 of pyridine N-oxide complexes of metal(II) halides and mixed-ligand (pyridine N-oxide—dimethylsulphoxide) complexes of copper(II) halides

The infrared spectra of the complexes [M(pyO)(H₂O)Cl₂] (M = Mn, Fe, Co, Ni, Cu; pyO = pyridine N-oxide) have been determined. Assignments of ν M-Opy, νM-OH₂ and ν M-Cl are made by observing the effects of deuterating the coordinated pyO and H₂O and replacing chloride by bromide in the Mn(II) complex. Assignments of metal—ligand modes in the mixed ligand complexes [M(pyO)(dmso)X₂] (dmso = dimethylsulphoxide) are made by comparison with the spectra of (ML₂X₂] (L = pyO, dmso) and by observing the effects of deuteration of pyO and dmso. Structural aspects of the spectra are discussed.     

Regioselective coupling of pentafluorophenyl substituted alkynes: mechanistic insight into the zirconocene coupling of alkynes and a facile route to conjugated polymers bearing electron-withdrawing pentafluorophenyl substituents

The reaction of Cp(2)ZrCl(2) with 2 equiv of BuLi at -78 degrees C, followed by the addition of an unsymmetrical tetra- or pentafluorophenyl substituted alkyne R(1)C[triple bond]CAr(f) (R(1), Ar(f) = (CH(2))(4)Me, p-C(6)F(4)H; Me, p-C(6)F(4)H; Ph, C(6)F(5)), resulted in regioselective couplings of these alkynes to zirconacyclopentadienes in which the Ar(f) substituents preferentially adopt the 3,4-positions (beta beta) of the zirconacyclopentadiene ring. With Cp(2)Zr(py)(Me(3)SiC[triple bond]CSiMe(3)) as the zirconocene reagent, the couplings could be carried out at room temperature; however, at higher temperatures significant quantities of the 2,4-fluoroaryl substituted (alpha beta) isomers were also formed. None of the conditions employed produced the 2,5-fluoroaryl substituted (alpha alpha) isomers. These fluoroaryl-substituted zirconacyclopentadienes were readily converted to butadienes via reactions with acids. The zirconacyclopentadiene Cp(2)ZrC(4)-2,5-Ph(2)-3,4-(C(6)F(5))(2), which resulted from the coupling of PhC[triple bond]C(C(6)F(5)), was converted to the corresponding thiophene by reaction with S(2)Cl(2), and to an arene by reaction with MeO(2)CC[triple bond]CCO(2)Me/CuCl. Mechanistic studies on zirconocene couplings of (p-CF(3)C(6)H(4))C[triple bond]C(p-MeC(6)H(4)) indicate that the observed regioselectivities are determined by an electronic factor that controls the orientation of at least one of the two alkynes as they are coupled. Additionally, these studies suggest an unsymmetrical transition state for the zirconocene coupling of alkynes, and this is supported by DFT calculations. The reaction of [(C(6)F(5))C[triple bond]CCH(2)](2)CH(2) with Cp(2)Zr(py)(Me(3)SiC[triple bond]CSiMe(3)) resulted in a zirconacyclopentadiene in which the pentafluorophenyl substituents have been forced into the 2,5-positions (alpha alpha). Zirconocene coupling of the diyne (C(6)F(5))C[triple bond]C-1,4-C(6)H(4)-C[triple bond]C(C(6)F(5)) provided a route to conjugated polymers bearing electron-withdrawing pentafluorophenyl groups.     

A 3D QSAR study on a set of dopamine D4 receptor antagonists

The molecular alignments obtained from a previously reported pharmacophore model have been employed in a three-dimensional quantitative structure-activity relationship (3D QSAR) study, to obtain a more detailed insight into the structure-activity relationships for D(2) and D(4) receptor antagonists. The frequently applied CoMFA method and the related CoMSIA method were used. Statistically significant models have been derived with these two methods, based on a set of 32 structurally diverse D(2) and D(4) receptor antagonists. The CoMSIA and the CoMFA methods produced equally good models expressed in terms of q(2) values. The predictive power of the derived models were demonstrated to be high. Graphical interpretation of the results, provided by the CoMSIA method, brings to light important structural features of the compounds related to either low- or high-affinity D(2) or D(4) antagonism. The results of the 3D QSAR studies indicate that bulky N-substituents decrease D(2) binding, whereas D(4) binding is enhanced. Electrostatically favorable and unfavorable regions exclusive to D(2) receptor binding were identified. Likewise, certain hydrogen-bond acceptors can be used to lower D(2) affinity. These observations may be exploited for the design of novel dopamine D(4) selective antagonists.     

Allylic Peroxidations with Bis(2‐pyridylimino)isoindolato‐Cobalt and ‐Iron Complexes

Several novel substituted bis(2‐pyridylimino)isoindolato (BPI) cobalt(II) and iron(II) complexes [M(BPI)(OAc)(H₂O)] (M = Co: 1 ‐ 6, Fe: 7) have been synthesized by reaction of bis(2‐pyridylimino)isoindole derivatives with the corresponding metal(II) acetates. Reaction of 1‐6 with 1.5 ‐ 2 molar equivalents of t‐BuOOH gave the corresponding alkylperoxocobalt(III) complexes [Co(BPI)(OAc)(OOtBu)] (10 ‐ 15). Using an aqueous solution of t‐BuOOH (70 %), cyclohexene was selectively catalytically oxidized to the dialkylperoxide cyclohex‐2‐ene‐1‐t‐butylperoxide.     

Preparation of high molecular weight polyurethane particles by nonaqueous emulsion polyaddition

A versatile nonaqueous emulsion polyaddition process for the one-step fabrication of spherical polyurethane nanoparticles is presented. Three different emulsion systems were used consisting of N,N′-dimethylformamide (DMF) dispersed in n-hexane, acetonitrile dispersed in cyclohexane, and acetonitrile dispersed in tetradecane. After successful stabilization of the emulsion systems by using a poly(isoprene)-poly(methylmethacrylate) block copolymer, the fabrication of the polyurethanes was carried out within the dispersed polar phase. The polyurethane particles showed average diameters as small as 35 nm. Additionally, infrared (IR) characterization revealed that the formation of any urea, which decreases the mechanical properties of the polyurethanes, was prevented during the polyaddition. This was attributed to the anhydrous reaction conditions. Gel permeation chromatography (GPC) analysis demonstrated the average molecular weights (M _n) of the polyurethanes to be as high as 16,500 g/mol, corresponding to conversions of 0.98. Comparable molecular weights and conversions have not previously been achieved without the formation of urea.     

1-Lithio-2,2-diphenyl-1-(phenylsulfonyl)ethen: Synthese und Kristallstruktur

Syntheses and Crystal Structure of 1-Lithio-2,2-diphenyl-1-(phenylsulfonyl)ethene Crystals of [1-lithio-2,2-diphenyl-1-(phenylsulfonyl)ethene]– N,N,N′,N′ -tetramethylethylenediamine (2/2) ( 2 ) were prepared by addition of BuLi to 1,1-diphenyl-2-(phenylsulfonyl)ethene ( 1 ) in the presence of N,N,N′,N′ -tetramethylethylenediamine (TMEDA) at low temperature. The X-ray structure analysis shows a centrosymmetric dimer bridged over an eight-membered (Li? O? S? O)₂ ring. There are no Li–C contacts to the C(α) atoms. Both Li cations are tetracoordinated via the sulfonyl O-atoms and the N-atoms of the TMEDA ligand. The X-ray structure analysis of 1,1-diphenyl-2-(phenylsulfonyl)ethene ( 1 ) also was determined to compare interatomic distances and angles.     

Photoreduction of Triplet Benzophenone by Tertiary Amines: Amine molecular structure and ketyl radical yield

The photoreduction of triplet benzophenone by 14 tertiary amines was investigated. The ketyl radical yields do not correlate with the quenching rate constants, nor with the electron donor propensity of the amines. Individual structural features of the amines seem to determine the photoreduction yields.