Complexing processes in M(II)-dithiomalonamide-diacetyl triple systems (M= Ni,Cu) in ethanol solution and in a metal(II)hexacyanoferrate(II) gelatin-immobilized matrix materials

The complexing processes in the M ^II -dithiomalonamide-diacetyl triple system (M=Ni, Cu) occuring in the nickel(II)- and copper(II)hexacyanoferrate(II) gelatin-immobilized matrix in contact with aqueous alkaline solutions (pH~12) containing dithiomalonamide and diacetyl at room temperature, and between MCl₂, dithiomalonamide and diacetyl in EtOH solutions upon heating to$80°C, have been studied. In the Ni ^II -dithiomalonamide-diacetyl system, template synthesis occurs in EtOH solution but does not occur in the gelatin-immobilized matrix, whereas in the Cu ^II -dithiomalonamide-diacetyl system, template synthesis occurs in the gelatin-immobilized matrix but not in EtOH solution. Dithiomalonamide and diacetyl are the ligand synthons in the processes indicated.     

Blood lead monitoring in Italy: Assessment of the quality of results obtained between 1992 and 1994

Between 1992 and 1994, a new screening campaign for blood Pb monitoring in the Italian general population was carried out. Since the first campaign (started in 1978, in accomplishment of the European Community Directive 77/312/EEC) a working group of the Laboratory of Clinical Biochemistry at the Italian National Institute of Health (Istituto Superiore di Sanità), as the Reference Centre (RC), has coordinated the activity of various laboratories spread over the national territory. Appropriate quality assurance procedures, including an external quality assessment scheme (EQAS), were elaborated. Within the EQAS, three or four trials were carried out every year. Each laboratory participating in the trial analyzed eight control samples prepared from cow blood at different Pb concentrations. The results obtained by each peripheral laboratory and the RC between 1992 and 1994 have been compared by regression analysis. The same statistical method was adopted to compare the results obtained by each peripheral laboratory and the RC in the duplicate analysis of about 10 per cent of the human samples collected during the 1992–1994 monitoring campaign. There was no evidence of systematic differences between the regression lines obtained on control and human samples. In spite of the lower Pb concentration in the control samples analyzed during the 1992–1994 campaign, the analytical performance of the laboratories was better than that obtained in the previous screening campaign (1985–1986). Blood Pb levels observed in human samples collected between 1992 and 1994, confirm the downward time trend observed in the campaigns carried out in 1978–1979, 1980–1981 and 1985–1986. This study confirms that the results obtained in an EQAS are representative of the actual performance in the analysis of real (human) samples.     

Rigid optically-active D2 and D3 macrocycles

The synthesis and characterization of novel optically-active macrocycles, obtained by esterification reaction from a binaphthyl-containing diol and phthalic or terephthalic acids, and possessing overall D2 or D3 symmetry, is described.     

A general NMR method for rapid, efficient, and reliable biochemical screening

High-throughput screening is usually the method of drug-lead discovery. It is now well accepted that, for a functional assay, quality is more important than quantity. The ligand-based or protein-based NMR screening methodologies for detecting compounds binding to the macromolecular target of interest are now well established. A novel and sensitive NMR method for rapid, efficient, and reliable biochemical screening is presented. The method named 3-FABS (three fluorine atoms for biochemical screening) requires the labeling of the substrate with a CF(3) moiety and utilizes (19)F NMR spectroscopy for the detection of the starting and enzymatically modified substrates. The method allows for high-quality screening of large compound or natural product extract collections and for measuring their IC(50) values. Applications of this technique to the screening of inhibitors of the Ser/Thr kinase AKT1 and the protease trypsin are presented. In addition, an interesting application of 3-FABS to functional genomics is also presented.     

Structural characterization techniques for the analysis of semiconductor strained heterostructures

A combined method for structural characterization of strained epitaxial heterostructures involving different techniques such as Rutherford backscattering spectrometry (RBS), multiple crystal X-ray diffractometry (MCD) and transmission electron microscopy (TEM) is presented. In order to obtain a complete characterization of the analysed structure, three different quantities are measured independently: the epilayer thickness, the density of misfit dislocations which may appear at the interface, and the significant components of the strain tensor, mainly the tetragonal distortion, affecting the epilayer lattice. In this way the thermodynamic state and the mechanisms of plastic deformation of the structures can be fully investigated. In this contribution we present and discuss the experimental results concerning a set of InP/GaAs samples having different layer thicknesses ranging from 5 to 500 nm. The thickness of the samples has been determined by RBS. Measurements of in-plane strain and tetragonal distortion have been performed by MCD and RBS-channelling respectively, finally TEM has been used for determining the defects densities and distribution.     

High-intensity ultrasound and microwave, alone or combined, promote Pd/C-catalyzed aryl-aryl couplings

Pd-catalyzed homo- and cross-couplings of boronic acids and aryl halides were successfully carried out both in aqueous media under high-intensity ultrasound (US) and in DME under microwave (MW). Heterogeneous catalysis with Pd/C was employed, avoiding phosphine ligands and phase-transfer catalysts. In a trial series involving 15 different iodo- and bromoaryls and 7 boronic acids, both energy sources drastically reduced reaction times affording biaryls in acceptable to good yields. With palladium(II) acetate as catalyst, electron-deficient aryl chlorides also reacted, affording a few biaryls in acceptable yields. Ullmann-type zinc-mediated homocoupling of iodo- and bromoaryls in the presence of Pd/C under CO₂ atmosphere was achieved in aqueous media under US, though not under MW. Suzuki homo- and cross-couplings were also carried out in a new reactor developed in our laboratory, featuring combined US and MW irradiation, further improving a green synthetic method.     

Fluorine-NMR competition binding experiments for high-throughput screening of large compound mixtures

High-throughput ligand-based NMR screening with competition binding experiments is extended to (19)F detection. Fluorine is a favorable nucleus for these experiments because of the significant contribution of the Chemical Shift Anisotropy (CSA) to the (19)F transverse relaxation of the ligand signal when bound to a macromolecular target. A low to moderate affinity ligand containing a fluorine atom is used as a reference molecule for the detection and characterization of new ligands. Titration NMR experiments with the selected reference compound are performed for finding the optimal set-up conditions for HTS and for deriving the binding constants of the identified NMR hits. Rapid HTS of large chemical mixtures and plant or fungi extracts against the receptor of interest is possible due to the high sensitivity of the (19)F nucleus and the absence of overlap with the signals of the mixtures to be screened. Finally, a novel approach for HTS using a reference molecule in combination with a control molecule is presented.     

Bis(oxofluorenediyl)oxacyclophanes: synthesis, crystal structure and complexation with paraquat in the gas phase

The first three representatives of the new family of oxacyclophanes incorporating two 2,7-dioxyfluorenone fragments, connected by [-CH(2)CH(2)O-](m) spacers (m=2-4), have been synthesized. The yield of the smallest oxacyclophane (m=2) is considerably higher with respect to the larger ones (m=3 and m=4), which are formed in comparable yields. Molecular modeling and NMR spectra analysis of the model compounds suggest that an essential difference in oxacyclophanes yields is caused by formation of quasi-cyclic intermediates, which are preorganized for macrocyclization owing to intramolecular pi-pi stacking interactions between the fluorenone units. The solid-state structures of these oxacyclophanes exhibit intra- and intermolecular pi-pi stacking interactions that dictate their rectangular shape in the fluorenone backbone and crystal packing of the molecules with the parallel or T-shape arrangement. The crystal packing in all cases is also sustained by weak C--HO hydrogen bonds. FAB mass spectral analysis of mixtures of the larger oxacyclophanes (m=3 and m=4) and a paraquat moiety revealed peaks corresponding to the loss of one and two PF(6) (-) counterions from the 1:1 complexes formed. However, no signals were observed for complexes of the paraquat moiety with the smaller oxacyclophane (m=2). Computer molecular modeling of complexes revealed a pseudorotaxane-like incorporation of the paraquat unit, sandwiched within a macrocyclic cavity between the almost parallel-aligned fluorenone rings of the larger oxacyclophanes (m=3 and m=4). In contrast to this, only external complexes of the smallest oxacyclophane (m=2) with a paraquat unit have been found in the energy window of 10 kcal mol(-1).     

Sensitivity improvement in 19F NMR-based screening experiments: theoretical considerations and experimental applications

NMR-based binding and functional screening performed with FAXS (fluorine chemical shift anisotropy and exchange for screening) and 3-FABS (three fluorine atoms for biochemical screening) represents a potential alternative approach to high-throughput screening for the identification of novel potential drug candidates. The major limitation of this method in its current status is its intrinsic low sensitivity that limits the number of tested compounds. One approach for overcoming this problem is the use of a cryogenically cooled (19)F probe that reduces the thermal noise in the receiver circuitry. Sensitivity improvement in the two screening techniques achieved with the novel cryogenic (19)F probe technology permits an increased throughput, detection of weaker binders and inhibitors (relevant in a fragment-based lead discovery program), detection of slow binders, and reduction in protein and substrate consumption. These aspects are analyzed with theoretical simulations and experimental quantitative performance evaluation. Application of 3-FABS combined with the cryogenic (19)F probe technology to rapid screening at very low enzyme concentrations and the current detection limits reached with this approach are also presented.