Neuropeptide imaging on an LTQ with vMALDI source: The complete ‘all-in-one’ peptidome analysis

Direct tissue imaging was performed on dissected insect tissue using a MALDI ion trap to visualize endogenous neuropeptides. Coupling tissue imaging to tandem MSⁿ allows for the identification of previously known species and the ability to identify new ones by de novo sequencing, as searchable databases for insects are sparse. Direct tissue imaging is an attractive technique for the study of neuropeptides as minimal sample preparation is required prior to mass spectrometry. We successfully identified neuropeptides present in the corpora cardiaca and allata of Acheta domesticus (the house cricket). Diagnostic fragments at low m/z were used to distinguish between lipids and neuropeptides. The distribution of peptides appears to be more differentially localized than that of phospholipids, which seem to be more evenly distributed within the tissue.     

Chelate polymers: II. Some novel transition metals complexes with azomethine‐containing siloxanes and their polyesters

New Schiff bases of 2,4‐dihydroxybenzaldehyde with siloxane‐α,ω‐diamines having different numbers of siloxane units in the chain have been synthesized and characterized by spectroscopy, elemental and thermal analyses. These azomethines were found to form complexes readily with copper(II), nickel(II), cobalt(II), cadmium(II) and zinc(II). From IR and UV–Vis studies, the phenolic oxygen and imine nitrogen of the ligand were found to be the coordination sites. Thermogravimetric analysis (TGA) data indicate the chelates to be more stable than the corresponding ligands. The melting points increase with shortening of the siloxane segment from azomethine, as well as the result of complexation. The chelates obtained were covalently inserted in polymeric linear structures by polycondensation through the OH‐difunctionalized ligand with 1,3‐bis(carboxypropyl)tetramethyldisiloxane. Direct polycondensation, assisted either by acetic anhydride or N,N′‐dicyclohexylcarbodiimide as dehydrating agent and the complex 4‐(dimethylamino)pyridinium 4‐toluenesulfonate as catalyst, was used for the synthesis of these compound types. The structures of the polymers obtained were confirmed by IR, UV and ¹H NMR. Characterization was undertaken by TGA, solubility tests and viscosity measurements. Copyright © 2003 John Wiley & Sons, Ltd.     

Influence of heat treatment conditions on the porosity changes of sulfonated styrene/divinylbenzene copolymers

Sulfonic cation exchangers with two ion exchange group concentrations (0.5 and 2.4 mmol/g, samples A and B, respectively) were obtained by sulfonation of a porous styrene (S) and divinylbenzene (DVB) copolymer with chlorosulfonic acid. Strong thermal decomposition of the sulfonated copolymer A, accompanied by significant changes in its porous structure, starts at ca. 400°C. The char has no sulfonic groups. After heat treatment at 400°C in steam, a sorbent was obtained (yield 65%) that shows higher phenol sorption than the untreated sample when related to the bed volume. The chlorosulfonic derivatives of the initial copolymer were less thermally resistant than the sulfonic ones obtained by hydrolysis. Pyrolysis of the cation exchanger B, in its H+ and Ca²⁺ forms, was carried out at 900°C (yield of both chars close to 30%). By subsequent steam activation at 800°C to a 50% burn-off of the char, sorbents with well-developed, but distinctly different, porous structures were obtained. The activated char from the sulfonated copolymer in its hydrogen form was highly microporous and indicated an effective surface area of 1180 m²/g. However, because of a low contribution of mesopores, its ability to adsorb phenol from the liquid phase was not very high. The activated char from the calcium-doped copolymer, indicating a smaller surface area (580 m²/g) but characterized by a well-developed mesoporosity, was a better sorbent for phenol. © 1994 John Wiley & Sons, Inc.     

An analytical proof of Hardy-like inequalities related to the Dirac operator

We prove some sharp Hardy-type inequalities related to the Dirac operator by elementary, direct methods. Some of these inequalities have been obtained previously using spectral information about the Dirac-Coulomb operator. Our results are stated under optimal conditions on the asymptotics of the potentials near zero and near infinity.     

Compositions for health products obtained by treatment of tomato with beta-cyclodextrin

The aim of this work was to produce lycopene-containing powders from tomato products by a solvent-free method making use of β-cyclodextrin (βCD). Powders were prepared by spray-drying a tomato concentrate (TC), one of the most bioavailable form of lycopene, after mechanical treatment with βCD in different weight ratios. The obtained product was centrifuged to eliminate partly food matrix and characterized for the amount of lycopene hydrodispersed/hydrosolubilized in the aqueous fraction. The chemical antioxidant activity of sera was evaluated too. Powders obtained by spray-drying sera exhibited good flow properties, a lycopene content between 0.4 and 1.09 mg/g and excellent water dispersability. The process developed, which makes use of βCD for the treatment of tomato products, turns to be of great interest to obtain a bulk material for nutraceuticals displaying superior biovailability of lycopene.     

Nanostructured polymetallaynes of controlled length: Synthesis and characterization of oligomers and polymers from 1,1′‐bis‐(ethynyl)4,4′‐biphenyl bridging Pt(II) or Pd(II) centers

The reactivity of square planar palladium(II) and platinum(II) complexes in trans or cis configuration, namely trans or cis‐[dichlorobis(tributylphosphine)platinum(II)] and trans‐[dichlorobis(tributylphosphine)palladium(II)] with 1,1′‐bis(ethynyl) 4,4′‐biphenyl, DEBP, leading to π‐conjugated organometallic oligomeric and polymeric metallaynes, was investigated by a systematic variation of the reaction conditions. The formation of polymers and oligomers with defined chain length [? M(PBu₃)₂ (C?C? C₆H₄? C₆H₄? C?C? )]_n (n = 3–10 for the oligomers, n = 20–50 for the polymers) depends on the configuration of the precursor Pt(II) and Pd(II) complexes, the presence/absence of the catalyst CuI, and the reaction time. A series of model reactions monitored by XPS, GPC, and NMR ³¹P spectroscopy showed the route to modulate the chain growth. As expected, the nature of the transition metal (Pt or Pd) and the molecular weight of the polymers markedly influence the photophysical characteristics of the polymetallaynes, such as optical absorption and emission behavior. Polymetallaynes with nanostructured morphology could be obtained by a simple casting procedure of polymer solutions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3311–3329, 2007     

Cetyltrimethylammonium hydroxide (CTAOH) as a general, ecofriendly catalyst for the formation of carbon-carbon bond through nitroalkanes

Nitroalkanes have been found to give good yields in Michael and nitroaldol (Henry) reactions by the use of a catalytic amount (10 mol%) of CTAOH, at room temperature and under solvent free conditions and in very short reaction times. The methods do not need a large excess of the nitroalkanes and show good chemoselectivity toward further functionalities.     

Microchemical Investigation of Archaeological Copper Based Artefacts Disclosing an Ancient Witness of the Transition from the Value of the Substance to the Value of the Appearance

In many Italian archaeological sites dated between the sixth and third centuries BC, unworked lumps of Cu-based materials are sometimes found, the so called Aes Rude, which according to archaeological considerations were appreciated as currency, as a medium of exchange and as a form of saving. The microchemical investigation of these ancient artefacts discloses their nature as apparently not usable for any functional applications or possible use. Indeed, Aes Rude resemble ordinary copper material, but microchemical results indicate that they are constituted by highly ferruginous leaded copper, making them useless for producing other metal objects by means of casting or hot and cold working. Notwithstanding this intrinsic negative feature, the production of these intractable Cu-based alloys was deliberately carried out to maximise the process yield in terms of produced metal from an impure and unselected metal ore by tailoring the smelting process parameters. With these considerations in mind, the microchemical investigation of these ancient iron–copper alloys gives evidence of the passage from the acceptance of an artefact value based on its true nature or potential use to the acceptance of the value based only on its appearance or form irrespective of its present or future use. This information could contribute to a better understanding of the evolution of human thought and economic and social interactions.     

Pressure-temperature phase diagrams of smectogenic 4'-alkyl-4-cyanobiphenyls (9CB, 10CB, 11CB and 12CB)

The pressure-temperature ( p - T ) phase diagrams for four smectogenic members of the 4'-alkyl-4-cyanobiphenyl homologous series ( n CB, n =9, 10, 11 and 12) over the temperature range 320-410 K and pressure range 0.1-300 MPa (3 kbar) were constructed using DTA. At 1 atm 9CB exhibits nematic and smectic A d phases, while the other members show only the smectic A d phase. However, at elevated pressures the clearing line splits in the case of 10CB and 11CB which indicates the induction of a nematic phase. It was found that the triple point, where the isotropic, nematic and smectic phases coexist, is strongly shifted to higher pressures with increasing chain length. This was interpreted as being caused by a loss of the rod-like shape of the molecules containing longer alkyl tails which explore a range of conformations. The slope of the clearing line, d T /d p , depends strongly on the length of the alkyl chain for the n CB series, but does not show a step-wise change between the nematogenic and smectogenic members.