Analytical Strategy for the Determination of Selenium in Biological Materials by Inductively Coupled Plasma-Mass Spectrometry with a Dynamic Reaction Cell

Selenium was determined in serum, hair, and tobacco by inductively coupled plasma-mass spectrometry using ⁷⁷Se, ⁷⁸Se, and ⁸²Se. The set of standards method (SSM) and the standard addition method (SAM) were applied to calibration with and without the use of internal standards (⁷²Ge and ¹⁰³Rh). In addition, the usefulness of the dynamic reaction cell (DRC) with methane as the reaction gas was characterized. The results obtained in different conditions were evaluated in terms of precision and accuracy. It was demonstrated theoretically and experimentally that an internal standard is a potential source of systematic errors as it can be influenced multiplicatively and additively by its own interferents (independently of selenium). Furthermore, it was shown that—against common opinion—an internal standard can fail in elimination of chemical interference effects influencing selenium and in increasing of precision of selenium determinations. The DRC was shown to be effective in the elimination of additive effects, although the results obtained by both SSM and SAM with DRC were systematically positively erroneous. Finally, selenium was determined accurately in each examined sample when SAM was applied to calibration, and signals were measured either for ⁸²Se without the use of the DRC, or for ⁷⁷Se or ⁷⁸Se with the use of the DRC. In addition, it has also been shown that samples should be diluted prior to analysis to the greatest acceptable extent.     

Silver nanoparticles formed in bio- and chemical syntheses with biosurfactant as the stabilizing agent

In this work, the comparison of the physical properties of silver nanoparticles (AgNPs) obtained via the reduction of silver nitrate (AgNO₃) in biological and chemical (model) syntheses supplemented with the biosurfactant surfactin is described. In the studies, two strains of Bacillus subtilis (denoted T’1 and I’1a) were used. The biological synthesis of AgNPs was performed using supernatants obtained from cultures of bacteria growing on brewery effluents, molasses, and Luria–Bretani (LB) medium. In model experiments, ascorbic acid served as the reductant; surfactin acted as the stabilizing agent. The surfactin concentrations were adjusted to 5 and 30?mg/L, which corresponded to minimum and maximum surfactin concentrations as measured in the supernatants obtained from the B. subtilis cultures. The chemical synthesis was carried out at acidic as well as alkaline pH. Dynamic light scattering (DLS) revealed that in model and biological samples, single AgNPs were accompanied by aggregated structures. Transmission electron microscopy showed that the contribution of the aggregates in bacterial supernatants and in chemical synthesis is negligible under acidic conditions. However, in the alkaline environment, this contribution predominates. In the model experiments, smaller nanoparticles were formed with higher concentrations of surfactant. The presence of surfactin significantly increased the stability of AgNPs in both bio- and chemical syntheses.     

Solvent extraction of Cu,Mo, V,and U from leach solutions of copper ore and flotation tailings

A micro-cloud point extraction method was discussed for preconcentration and spectrophotometric quantification of U(VI). The method depends on complex formation between U(VI) and 2-(4-sulphophenyloazo)-1,8-dihydroxy-3,6-naphtalenedisulphonic acid (SPADNS) at pH 7.0 and subsequent extraction of the complex in a mixed surfactant medium (cethyltrimethyl ammonium bromide and Triton X-114). The separation was carried out in the presence of 1% Na₂SO₄ at room temperature. The calibration curve was linear up to 3000 µg L^?1. The enrichment factor, detection limit and precision were 16.0, 1.05 µg L^?1, and 2.3%, respectively. The method was employed for the determination of U(VI) in real samples with different matrices.     

Electrodeposition of gold nanoparticles at a solid|ionic liquid|aqueous electrolyte three-phase junction

Gold nanoparticles have been electrodeposited on an electrode through electrogeneration at an ITO|AuCl₄^? solution in an ionic liquid|aqueous electrolyte three-phase junction. The electrodeposition was carried out by inverted double-pulse potential chronoamperometry. The direct reduction of AuCl₄^? ions at the electrode is followed by a counterion transfer through the liquid|liquid interface. Contrary to the electrodeposition from a single ionic liquid phase, scanning electron microscopy reveals that the shape of the resulting nanoparticles is highly angular and well-developed with a diameter of 110 ± 30 nm. Catalytic oxidation of glucose on the modified electrode is demonstrated.     

Three dimensional film electrode prepared from oppositely charged carbon nanoparticles as efficient enzyme host

Three dimensional carbon film electrodes were prepared from oppositely charged carbon nanoparticles (ca. 9 to 18 nm diameter) by a layer-by-layer approach. This was done by alternative immersion of indium tin oxide plates into suspension of positively and negatively charged particles. A stable film is formed already after single immersion and withdrawal step as confirmed by scanning electron microscopy. Up to ten immersion and withdrawal steps can be used to systematically increase the amount of nanoparticulate carbon material. The capacitive current density and current density of hydrogen peroxide reduction are proportional to the number of immersion and withdrawal steps. The same can be seen for adsorbed redox active 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonate). After adsorption of bilirubin oxidase into the film efficient bioelectrocatalytic dioxygen reduction is observed.     

Circular dichroism, optical rotation and absolute configuration of 2-cyclohexenone-cis-diol type phenol metabolites: redefining the role of substituents and 2-cyclohexenone conformation in electronic circular dichroism spectra

The absolute configurations of 2-cyclohexenone cis-diol metabolites resulting from the biotransformation of the corresponding phenols have been determined by comparison of their experimental and calculated circular dichroism spectra (TDDFT at the PCM/B2LYP/Aug-cc-pVTZ level), optical rotations (calculated at the PCM/B3LYP/Aug-cc-pVTZ level) and by stereochemical correlation. It is found that circular dichroism spectra and optical rotations of 2-cyclohexenone derivatives are strongly dependent on the ring conformation (M or P sofa S(5) or half-chair), enone non-planarity and the nature and positions of the hydroxy and alkyl substituents. The effect of non-planarity of the enone chromophore, including the distortion of the C=C bond, is determined for the model structures by TDDFT calculations at the PCM/B2LYP/6-311++G(2d,2p) level. Non-planarity of the C=C bond in the enone chromophore is commonly encountered in 2-cyclohexenone derivatives and it is a source of significant rotatory strength contribution to the electronic circular dichroism spectra. It is shown that the two lowest-energy transitions in acrolein and 2-cyclohexenone and its derivatives are n(C=O)-π(C=O)* and π(C=C)-π(C=O)*, as expected, while the shorter-wavelength (below 200 nm) transitions are of more complex nature. In 2-cyclohexenone and its alkyl derivatives it is predominantly a mixture of π(C=C)-π(C=C)* and π(C=C)-σ* transitions, whereas the presence of hydroxy substituent results in a dominant contribution due to the n(OH)-π(C=O)* transition. A generalized model for correlation of the CD spectra of 2-cyclohexenones with their structures is presented.     

Basis set and method dependence in quantum theory of atoms in molecules calculations for covalent bonds

The influence of various small- and medium-size basis sets used in Hartree-Fock (HF) and density functional theory (DFT)/B3LYP calculations on results of quantum theory of atoms in molecules based (QTAIM-based) analysis of bond parameters is investigated for several single, double, and triple covalent bonds. It is shown that, in general, HF and DFT/B3LYP methods give very similar QTAIM results with respect to the basis set. The smallest 6-31G basis set and DZ-quality basis sets of Dunning type lead to poor results in comparison to those obtained by the most reliable aug-cc-pVTZ. On the contrary, 6-311++G(2df,2pd) and in a somewhat lesser extent 6-311++G(3df,3pd) basis sets give satisfactory values of QTAIM parameters. It is also demonstrated that QTAIM calculations may be sensitive for the method and basis set in the case of multiple and more polarized bonds.     

Catalytic ignition of ionic liquids for propellant applications

In this proof of concept study, the ionic liquids, 2-hydroxyethylhydrazinium nitrate and 2-hydroxyethylhydrazinium dinitrate, ignited on contact with preheated Shell 405 (iridium supported on alumina) catalyst and energetically decomposed with no additional ignition source, suggesting a possible route to hydrazine replacements.     

Pulse shape analysis to reduce the background of BEGe detectors

A simple technique for pulse shape discrimination in HPGe-detectors of the so-called BEGe type, based on just one parameter obtained from one signal read out, is presented here. This technique allows discriminating between pulses generated when the deposited energy is located within a small region of about 1 mm³ from the pulses generated when the energy is deposited at different locations several mm or cm apart. Two possible applications using this technique are: (i) experiments that look for neutrinoless double β decay in ⁷⁶Ge, such as GERDA; (ii) γ spectrometry measurements where the Compton continuum can be reduced and the efficiency for cascading γ-rays can remain high. With this active background reduction technique a Compton suppression factor of about 3 was obtained. The detector response may be influenced by the detector size. The detector used for this study had a diameter of 6 cm, a thickness of 2.6 cm and a relative efficiency of 19%. The results obtained with this detector were consistent with the results obtained by Budjá? et al. [J Instrum 4:10, 2009] with a 50% relative efficiency BEGe detector.     

Ergodic properties of anomalous diffusion processes

In this paper we study ergodic properties of some classes of anomalous diffusion processes. Using the recently developed measure of dependence called the Correlation Cascade, we derive a generalization of the classical Khinchin theorem. This result allows us to determine ergodic properties of Lévy-driven stochastic processes. Moreover, we analyze the asymptotic behavior of two different fractional Ornstein–Uhlenbeck processes, both originating from subdiffusive dynamics. We show that only one of them is ergodic.