Separation of Lactoferrin from Human Saliva Using Monolithic Disc

In this study, we optimized method for the isolation and detection of lactoferrin from human saliva using 3 mm short monolithic disc. We optimized the conditions for separation as flow rate 4 mL min^?1 and ionic strength of effluent as 2 M·NaCl. We estimated limit of detection of whole method, which was hyphenated to the Bradford’s assay, down to 100 ng mL^?1. The purity of the isolated fractions was verified by sodium dodecyl sulphate-polyacrylamide gel electrophoresis and recovery of isolation was found to be 51 % using minimally processed sample of saliva. Further, we tested the optimized method on group of healthy volunteers (n = 7). We were able to distinguish between the healthy subjects and subject suffering from celiac disease, which reported at least 2.5× higher level of lactoferrin in comparison to healthy ones. The results were correlated with standard enzyme-linked immunosorbent assay (ELISA) kit with obtained correlation coefficient R ² = 0.8446. Analysis of lactoferrin in saliva by monolithic disc and subsequent offline photometric detection is faster and cheaper method compared to ELISA commercial kit. The total analysis of one sample takes <20 min.     

Nanosized zinc and magnesium ferrites obtained from PVA–metal nitrates’ solutions

The paper presents a study regarding the possibility of obtaining zinc and magnesium ferrites starting from poly(vinyl alcohol)–metal nitrates solutions. By controlled heating of these solutions, a redox interaction takes place leading to the formation of some coordination compounds of the involved metal cations with the oxidation products of poly(vinyl alcohol) (PVA). FT-IR spectroscopy has evidenced the disappearance of the NO ₃ ^? anions at 140 °C due to the redox interaction with PVA. Thermal analysis evidenced the difference in the interaction of the individual metal nitrates and PVA and thus the particularity of the preparation of each ferrite. The thermal decomposition of the synthesized precursors was finished below 400 °C as resulting from both thermal analysis and FT-IR spectroscopy. The obtained ferrites powders consist of fine nanoparticle with diameters ranging from 10 to 30 nm for the powders annealed at 500 °C, as resulting from the SEM images. The specific surface area of the powders obtained at 500 °C was 32.2 m² g^?1 for ZnFe₂O₄ and 21.7 m² g^?1 for MgFe₂O₄, characteristic of nanoscaled powders. The increasing of the annealing temperature at 1,000 °C leads to sintering of both ferrites, more advanced in the case of zinc ferrite.     

Thermal decomposition of metal nitrates

The paper presents a study regarding the preparation of 40 %M^IIFe₂O₄/60 %SiO₂ nanocomposites (M = Ni, Zn, Cu) by thermal decomposition of metal nitrates—poly(vinyl alcohol)–tetraethyl orthosilicate gels. Thermal analysis and FT-IR spectroscopy have evidenced that a redox reaction takes place between PVA and NO ₃ ^? ions in the pores of the formed hybrid gels. The result of this redox reaction is the formation of carboxylate-type coordination compounds that have the role of a precursor of the ferrite nanoparticles. By thermal decomposition of these precursors inside the silica matrix, the corresponding MFe₂O₄/SiO₂ nanocomposites are obtained starting with 600 °C, as resulting from XRD analysis. Elemental maps of the corresponding involved elements M (Ni, Zn, Cu), Fe, and Si have confirmed the homogenous distribution of the ferrite nanoparticles within the silica matrix. TEM images have shown that the nanocomposites were obtained as fine nanoparticles, with diameter up to 20 nm. All nanocomposites 40 %M^IIFe₂O₄/60 %SiO₂ obtained at 1000 °C presented magnetic properties characteristic to this type of nanocomposite.     

A membraneless gas-diffusion unit-multisyringe flow injection spectrophotometric method for ammonium determination in untreated environmental samples

A new design of a membraneless gas-diffusion (MGD) unit coupled to a multisyringe flow injection system is proposed. The spectrophotometric determination of ammonium using an acid-base indicator was chosen to show the feasibility of this approach. Hence, in alkaline medium, ammonium ions are transformed into ammonia (donor channel) which diffuses through the headspace into the acceptor stream (bromothymol blue solution), causing a pH change and subsequently a colour change. The exploitation of the enhanced potentialities of this re-designed MGD device was the main purpose of the present work. Hence, several strategies concerning flow management were studied seeking to characterize and improve the analytical features of the methodology and moreover, untreated environmental samples were analysed without previous filtration. Consequently, stopped flow in acceptor channel with continuous flow in donor channel was chosen for the application to wastewater and spiked river water samples. A linear concentration range between 10.0 and 50.0 mg L⁻¹ of NH₄⁺, a limit of detection of 2.20 mg L⁻¹ and a determination frequency of 11 h⁻¹ were obtained.     

Synthesis and application of imprinted polyvinylimidazole-silica hybrid copolymer for Pb2+ determination by flow-injection thermospray flame furnace atomic absorption spectrometry

A novel ion imprinted polyvinylimidazole-silica hybrid copolymer (IIHC) was synthesized and used as a selective solid sorbent for Pb(2+) ions preconcentration using an on-line solid phase extraction (SPE) system coupled to TS-FF-AAS. The ionic hybrid sorbent was prepared using 1-vinylimidazole and 3-(trimethoxysilyl)propylmethacrylate as monomers, Pb(2+) ions as template, tetraethoxysilane as reticulating agent and 2,2'-azobis-isobutyronitrile as initiator. The best on-line SPE conditions concerning sorption behavior, including sample pH (6.46), buffer concentration (9.0 mmol L(-1)), eluent (HNO(3)) concentration (0.5 mol L(-1)) and preconcentration flow rate (4.0 mL min(-1)), were optimized by means of full factorial design and Doehlert matrix. The analytical curve ranged from 2.5 to 65.0 μg L(-1) (r=0.999) with limit of detection of 0.75 μg L(-1); the precision (repeatability) calculated as relative standard deviation (n=10) was 5.0 and 3.6% for Pb(2+) concentration of 10.0 and 60.0 μg L(-1), respectively. From on-line breakthrough curve, column capacity was 3.5 mg g(-1). Preconcentration factor (PF), consumptive index (CI) and concentration efficiency (CE) were 128.0, 0.16 mL and 25.6 min(-1), respectively. The selective performance of the sorbent, based on relative selectivity coefficient, was compared to NIC (non imprinted copolymer) for the binary mixture Pb(2+)/Cd(2+), Pb(2+)/Cu(2+) and Pb(2+)/Zn(2+). The results showed that ion imprinted polyvinylimidazole-silica hybrid polymer had higher selectivity for Pb(2+) than NIC at 64.9, 16.0 and 8.8 folds. The developed method was successfully applied for highly sensitive and selective Pb(2+) determination in different kinds of water samples, parenteral solutions and urine. Accuracy was also assessed by analyzing certified reference fish protein (DORM-3) and marine sediment (MESS-3 and PACS-2) with satisfactory results.     

Kinetics and mechanism of the reactions of O‐aryl S‐(4‐nitrophenyl) dithiocarbonates with anilines in aqueous ethanol

The reactions of O‐(4‐methylphenyl) S‐(4‐nitrophenyl) dithiocarbonate and O‐(4‐chlorophenyl) S‐(4‐nitrophenyl) dithiocarbonate with a series of anilines are subjected to a kinetic investigation in 44 wt% ethanol–water, at 25.0 °C and an ionic strength of 0.2 M. The reactions are followed spectrophotometrically at 420 nm (appearance of 4‐nitrobenzenethiolate anion). Under excess amine, pseudo‐first‐order rate coefficients (k_obs) are found. For the reactions of both substrates with anilines, plots of k_obs versus free amine concentration at constant pH are nonlinear upwards, according to a second‐order polynomial equation. This kinetic behavior is in agreement with a stepwise mechanism consisting of two tetrahedral intermediates, one zwitterionic (T^±) and the other anionic (T^?), with a kinetically significant proton transfer from T^± to an aniline to yield T^?. The rate equation was derived from the proposed mechanism. By nonlinear least‐squares fitting of the rate equation to the experimental data, values of the rate micro‐coefficients involved in both steps were determined. Copyright © 2009 John Wiley & Sons, Ltd.     

Magnetic properties of RCr2Si2 compounds (R=Tb,Er)

We report on magnetic properties of RCr₂Si₂ compounds with R=Tb, Er. The polycrystalline samples were characterized by powder X-ray diffraction and found to be isostructurally crystallizing in the ThCr₂Si₂-type tetragonal structure. The samples were further investigated by specific heat, AC-susceptibility and magnetization methods in the temperature range 2–900 K and in magnetic fields up to 9 T. The magnetic measurements revealed the magnetic ordering of the rare-earth moments below about 2 K, whilst no high-temperature ordering of the Cr moments was observed. The evidence of for Cr magnetism is corroborated by results of first-principles calculations based on the density functional theory (DFT).     

ChemInform Abstract: H2O Nucleation Around Au+

ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable via the “References” option.