Investigation of 2-[(<Emphasis Type="Italic">E</Emphasis>)-2-(4-diethylaminophenyl)-1-ethenyl]-1,3,3-trimethyl-3H-indolium as a new highly sensitive reagent for the spectrophotometric determination of nitrophenols

A new, simple, rapid, and sensitive spectrophotometric method has been developed for the determination of nitrophenols [picric acid (PA); dinitrophenols (DNP)] in wastewater samples. The method is based on the reaction of nitrophenols with 2-[(E)-2-(4-diethylaminophenyl)-1-ethenyl]-1,3,3-trimethyl-3 H-indolium chloride reagent to form the colored ion associates, which are extracted by organic solvents. The molar absorptivity of the ion associates of PA with the investigated reagent ranges from 8.3×10⁴ to 11.3×10⁴ L mol^–1 cm^–1, depending on the extractant. Because only PA is extracted in an acidic medium with the investigated reagent, but both PA and DNP are extracted in an alkaline medium, it is possible to determine both substances in a mixture. Appropriate reaction conditions have been established. The absorbance of the colored extracts obeys Beers law in the range of 0.04–4.58 mg L^–1 PA, 1.0–18.4 mg L^–1 2,4-DNP and 1.2–14.7 mg L^–1 2,6-DNP, respectively. The limit of detections, calculated from a blank test (n=10; P=0.95), are 0.05 mg L^–1 PA, 0.9 mg L^–1 (2,4-DNP), and 1.1 mg L^–1 (2,6-DNP), respectively.     

Use of solvent sorption to detect structural changes in rigid PVC compounds

The effects of type of PVC and its thermal history on solvent sorption behaviour were investigated. Samples were immersed in toluene at 25°C, and the equilibrium solvent uptake and sorption half-times were measured for a variety of samples. The shape of the sorption curve was also observed. Equilibrium sorption was found to decrease with increasing amount of crystallinity in the sample. Sorption half-time increased with increased crystallinity, but minimum equilibrium sorption did not correspond with maximum half-time, possibly due to the type of crystallinity present. The shape of the sorption curve (Fickian or Case II sorption) also depended on the ype of PVC used and is thermal history. The solvent sorption technique was shown to be a sensitive method for detecting small structural changes in PVC.     

organocuprate reactions of enone lactones. I. Synthesis of trans-fused rings via conjugate addition.

Control of the stereochemistry of substituents needed to construct a bicyclic system (e.g. a hydrindanone) is achieved by conjugate addition of an organocuprate to a cyclohexenone made conformationally rigid by the attachment of a 1,3-lactone.     

Identification of a chemical indicator of the rupture of 1,4-β-glycosidic bonds of cellulose in an oil-impregnated insulating paper system

In this study, headspace gas chromatography/mass spectrometry has been used to assess the volatile by-products generated by the ageing of oil-impregnated paper insulation of power transformers. Sealed-glass ampoules were used to age under oxidative conditions 0.5-g specimens of insulating paper in 9 mL of inhibited mineral oil in a temperature range of 60–120 °C and moisture of 0.5, 1 and 2% (w/w). A linear relationship between one of the oil-soluble degradation by-products, i.e. methanol, and the number of ruptured 1,4-β-glycosidic bonds of cellulose, regardless of the type of paper (ordinary Kraft or thermally-upgraded (TU) Kraft paper), was established for the first time in this field. Ageing at 130 °C of model compounds of the Kraft paper constituents (α-cellulose, hemicellulose and lignin) and two cellulosic breakdown by-products (D-(+)-glucose and 1,6-anhydro-β-d-glucopyranose) confirmed that the α-cellulose degradation was mostly responsible for the presence of this molecule in the system. Furthermore, additional 130 °C-tests with six different papers and pressboard samples under a tight control of initial moisture indicated that at least one molecule of methanol is formed for each rupture of 1,4-β-glucosidic bond of the molecular chains. Stability tests showed that the ageing indicator is stable under the oxygen and temperature conditions of open-breathing transformers. The presence of methanol was detected in 94% of oil samples collected from over than 900 in-service pieces of equipment, confirming the potential for this application. Lastly, the tests have shown that oil-oxidation by-products and TU-nitrogenous agents modify the methanol partitioning coefficients in the paper/oil/air system, which makes their study essential over a range of field conditions encountered by power transformers. Results are presented and discussed in comparison with 2-furfuraldehyde, which is the current reference in the domain.     

Investigation of the formation process of MCs+-molecular ions during sputtering

In secondary ion mass spectrometry, the detection of MCs+ clusters (with M an element of the specimen) under a Cs bombardment is frequently used for the quantification of major elements. Despite some very good results obtained by this method, some problems still remain. In order to gain some more insight into these problems, the formation mechanism of the MCs+ clusters is investigated using a Monte Carlo model. It is shown that the majority of the constituent particles of the formed clusters are initially first or second neighbor atoms at the surface and that the velocity distribution of the MCs+ clusters becomes broader and peaked at higher velocities with increasing surface binding energy of the M atom. In addition, it is demonstrated that the interaction potential between the M and Cs+ particle has no influence on the velocity distribution of the MCs+ clusters. On the other hand, the cluster formation probability, defined as the probability that a sputtered M and Cs+ particle will form a MCs+ cluster, is extremely sensitive to this interaction potential. It is also shown that the cluster formation probability decreases with increasing surface binding energy. Finally, a good correspondence is obtained between the calculated and experimental velocity distributions of MCs+ clusters sputtered from different monoatomic materials. As a consequence, the Monte Carlo model and the discussed results can be validated.     

Accurate pKa determination for a heterogeneous group of organic molecules.

Single-molecule studies that allow to compute pKa values, proton affinities (gas-phase acidity/basicity) and the electrostatic energy of solvation have been performed for a heterogeneous set of 26 organic compounds. Quantum mechanical density functional theory (DFT) using the Becke-half&half and B3LYP functionals on optimized molecular geometries have been carried out to investigate the energetics of gas-phase protonation. The electrostatic contribution to the solvation energies of protonated and deprotonated compounds were calculated by solving the Poisson equation using atomic charges generated by fitting the electrostatic potential derived from the molecular wave functions in vacuum. The combination of gas-phase and electrostatic solvation energies by means of the thermodynamic cycle enabled us to compute pKa values for the 26 compounds, which cover six distinct chemical groups (carboxylic acids, benzoic acids, phenols, imides, pyridines and imidazoles). The computational procedure for determining pKa values is accurate and transferable with a root-mean-square deviation of 0.53 and 0.57 pKa units and a maximum error of 1.0 pKa and 1.3 pKa units for Becke-half&half and B3LYP DFT functionals, respectively.     

Selective separations by reactive ion exchange: Part 4. Preconcentration of cadmium and zinc by in situ precipitation as hexacyanoferrate(II) salts on gel and macroporous ion-exchange resins

The in situ precipitation of traces of cadmium(II) and zinc(II) ions as hexacyanoferrates from aqueous matrices was studied on conventional polystyrene gel and macroporous cation- and anion-exchange resins. Coprecipitation with each other or with copper(II) ions present in binary cation resins or in solution, and the influence of added nonprecipitating ions of the same charge type such as magnesium(II) were investigated. Microporous (gel) cation exchangers gave reasonable recoveries and macroporous cation exchangers gave very good recoveries; but macroporous anion exchangers performed best, suggesting macroporous hexacyanoferrate(II) resin as an ideal phase for collection/preconcentration of traces of Cu²⁺, Cd²⁺, Zn²⁺, and possibly Co²⁺, Ni²⁺, and Pb²⁺ from waters. As expected, very low yields were obtained with conventional anion exchange resin in the hexacyanoferrate form. Uniform distribution of Cu²⁺, Zn²⁺, and Cd²⁺ over macroporous anion-exchange resin phases were established by means of electron probe scans and taken as evidence for the formation of a uniform, well-developed precipitate layer covering the entire resin particle surface.     

The synthesis of 1-alkyl-4a-(4-chlorophenyl)- 4,4a-dihydropyrimido[6,1-a]isoindol-9(3H)-one

The primary amino group of 3-(2-aminoethyl)-3-(4-chlorophenyl)-2,3-dihydro-1H-isoindol-1-one ( 1 ) was acylated with acetyl chloride, benzoyl chloride and phenyl acetyl chloride to form the amides 2a -c, respectively. These were cyclized in phosphorus oxychloride to give the 1-substituted-4a-(4-chlorophenyl)-4,4a-dihydropyrimido [6,1-a]isoindol-9(3H)-ones 3a-c . Heating of 1 in formic acid lead to the formation of 4a-(4-chlorophenyl)-4,4a-dihydropyrimido[6,1-a]isoindol-9(3H) -one (3d) . Heating of 1 in the presence of phosgene lead to the formation of 4a-(4-chlorophenyl)-2,3,4,4a-tetrahydropyrimido[6,1-a]isoindole-1, 9-dione (4).