Rapid Isolation of a Facultative Anaerobic Electrochemically Active Bacterium Capable of Oxidizing Acetate for Electrogenesis and Azo Dyes Reduction

In this study, 27 strains of electrochemically active bacteria (EAB) were rapidly isolated and their capabilities of extracellular electron transfer were identified using a photometric method based on WO₃ nanoclusters. These strains caused color change of WO₃ from white to blue in a 24-well agar plate within 40 h. Most of the isolated EAB strains belonged to the genera of Aeromonas and Shewanella. One isolate, Pantoea agglomerans S5-44, was identified as an EAB that can utilize acetate as the carbon source to produce electricity and reduce azo dyes under anaerobic conditions. The results confirmed the capability of P. agglomerans S5-44 for extracellular electron transfer. The isolation of this acetate-utilizing, facultative EBA reveals the metabolic diversity of environmental bacteria. Such strains have great potential for environmental applications, especially at interfaces of aerobic and anaerobic environments, where acetate is the main available carbon source.     

Solubility and solution rheology of acrylamide-sulfobetaine copolymers

The copolymer of acrylamide and 3-[N-(2-methacryloxylethyl)-N,N-dimethylammonio]-propane sulfonate (PAM-MDMPS) was prepared via free radical copolymerization. Solubility of the copolymers was studied by turbidimetric titration method under different conditions. It was found for the first time that the critical salt concentration to dissolve the copolymer showed a plateau over one order of magnitude up to the critical overlap concentration. Rheological behavior and chain conformation of the copolymers in 1 M NaCl solution were also studied. The concentration regions according to scaling theory were found the same as neutral polymers in good solvent. The specific viscosities could be normalized by the overlap parameter. According to the Huggins relation, the copolymers adopted a more compact conformation in 1 M NaCl with increasing MDMPS content due to the hydrophobic association of the betaine unit in the macromolecular backbone, which was stabilized by the strongly hydrated dipolar pendant chains.     

Weak acid–base interaction induced assembly for the formation of rambutan-like poly(styrene-alt-maleic anhydride)/silica composite microspheres

To investigate the effect of surface functionality on the morphology of polymer/silica composite, poly(styrene-alt-maleic anhydride) (SMA) spheres prepared via precipitation polymerization method was employed. In water/ethanol solution, diethanolamine (DEA) was used to catalyze the hydrolysis reaction of tetraethoxysilane (TEOS), and rambutan-like poly(styrene-alt-maleic anhydride)/silica (SMA/SiO₂) microspheres were synthesized through in situ sol–gel process. The obtained structure and morphology were characterized by FTIR, NMR, TEM, SEM, and TGA. The results showed that the hydrolyzed SMA chains on the surface was crucial to the nucleation and growth of silica, and the morphologies of SMA/SiO₂ composite microspheres can be controlled by the amount of DEA and the ratio of SMA/TEOS. In addition, the SMA/SiO₂ microspheres were used to prepare hierarchical structure of SMA/SiO₂/Ag particles, which were utilized for the construction of surface-enhanced Raman scattering substrate (SERS).     

Enhanced mechanical and thermal properties of poly(l-lactide) nanocomposites assisted by polydopamine-coated multiwalled carbon nanotubes

Herein, a facile and noncovalent modification for multiwalled carbon nanotubes (MWNTs) is adopted by the self-polymerization of dopamine (DOPA). And, the polydopamine-coated MWNTs (D-MWNTs) were further incorporated into poly(l-lactide) (PLLA) matrix through the solvent-casting method. It is found that the D-MWNTs tend to be well dispersed in PLLA matrix than the pristine MWNTs and the D-MWNTs that can act as heterogeneous nucleators that evidently affect the morphology and crystallization behavior of PLLA. In addition, the significant improvement of dispersion and the interface interaction of PLLA/D-MWNTs, via dopamine coating between the MWNTs and PLLA matrix, results in enhanced mechanical and thermal properties and electrical conductivity. This facile methodology is believed to afford broad application potential in carbon nanotubes (CNTs)-based polymer nanocomposites.     

(英)硫酸氢钾高效催化一锅法合成5-未取代的3,4-二氢嘧啶-2(1H)-酮

无溶剂条件下,硫酸氢钾可有效催化芳香醛、苯乙酮衍生物和脲的三组分"一锅法"Biginelli反应来合成5-未取代的3,4-二氢嘧啶-2(1H)-酮。确定了优化反应条件。产品结构经IR、1H NMR、MS和元素分析进行表征。     

原子荧光法测定茶叶中的硒含量

采用原子荧光法测定茶叶中的硒含量,对样品消解温度及仪器条件进行了优化。还原剂为1.0%硼氢化钾–0.5%氢氧化钾溶液,载流液为3%盐酸溶液。在优化条件下,硒的质量浓度在0~20 ng/mL范围内与荧光强度呈良好的线性关系,相关系数r=0.999,检出限为0.8 ng/mL。该法的加标回收率为88.08%~101.39%,测定结果的相对标准偏差为2.03%~4.84%(n=6)。该方法实际操作性强,准确度高,适用于日常检验工作中对批量茶叶中硒含量的测定。     

α-Al_2O_3比表面积标准物质的研制

选择市售α-Al2O3粉体作为比表面积标准物质候选材料,采用交叉缩分方法对标准物质样品进行分装。检验结果表明α-Al2O3标准物质样品具有良好的均匀性和稳定性(18个月)。采用国际公认的氮气物理吸附BET方法,联合测量能力经过确认的8家实验室对α-Al2O3标准物质样品进行定值,标准值比表面积为5.47 m2/g,不确定度为0.22 m2/g(k=2)。     

Droplet Precise Self-Splitting on Patterned Adhesive Surfaces for Simultaneous Multidetection

Precise separation and localization of microdroplets are fundamental for various fields, such as high-throughput screening, combinatorial chemistry, and the recognition of complex analytes. We have developed a droplet self-splitting strategy to divide an impacting droplet into predictable microdroplets and deposit them at preset spots for simultaneous multidetection. No matter exchange was observed between these microdroplets, so they could be manipulated independently. Droplet self-splitting was attributed to anisotropic liquid recoiling on the patterned adhesive surface, as influenced by the droplet Weber number and the width of the low-adhesive stripe. A quantitative criterion was also developed to judge the droplet self-splitting capability. The precise separation and distribution of microdroplets enabled simultaneous arrayed reactions and multiple analyte detection using one droplet of sample.     

Strong Visible-Light-Absorbing Cuprous Sensitizers for Dramatically Boosting Photocatalysis

Developing strong visible-light-absorbing (SVLA) earth-abundant photosensitizers (PSs) for significantly improving the utilization of solar energy is highly desirable, yet it remains a great challenge. Herein, we adopt a through-bond energy transfer (TBET) strategy by bridging boron dipyrromethene (Bodipy) and a Cu^I complex with an electronically conjugated bridge, resulting in the first SVLA Cu^I PSs ( Cu-2 and Cu-3 ). Cu-3 has an extremely high molar extinction coefficient of 162 260 m ⁻¹ cm⁻¹ at 518 nm, over 62 times higher than that of traditional Cu^I PS ( Cu-1 ). The photooxidation activity of Cu-3 is much greater than that of Cu-1 and noble-metal PSs (Ru(bpy)₃²⁺ and Ir(ppy)₃⁺) for both energy- and electron-transfer reactions. Femto- and nanosecond transient absorption and theoretical investigations demonstrate that a “ping-pong” energy-transfer process in Cu-3 involving a forward singlet TBET from Bodipy to the Cu^I complex and a backward triplet-triplet energy transfer greatly contribute to the long-lived and Bodipy-localized triplet excited state.     

Pressure-Suppressed Carrier Trapping Leads to Enhanced Emission in Two-Dimensional Perovskite (HA)2(GA)Pb2I7

A remarkable PL enhancement by 12 fold is achieved using pressure to modulate the structure of a recently developed 2D perovskite (HA)₂(GA)Pb₂I₇ (HA=n-hexylammonium, GA=guanidinium). This structure features a previously unattainable, extremely large cage. In situ structural, spectroscopic, and theoretical analyses reveal that lattice compression under a mild pressure within 1.6 GPa considerably suppresses the carrier trapping, leading to significantly enhanced emission. Further pressurization induces a non-luminescent amorphous yellow phase, which is retained and exhibits a continuously increasing band gap during decompression. When the pressure is released to 1.5 GPa, emission can be triggered by above-band gap laser irradiation, accompanied by a color change from yellow to orange. The obtained orange phase could be retained at ambient conditions and exhibits two-fold higher PL emission compared with the pristine (HA)₂(GA)Pb₂I₇.