High-Sensitivity Immunofluorescence Staining: A Comparison of the Liposome Procedure and the FASER Technique on mGR Detection

Flow cytometry has become a widely-used and powerful tool for the characterization of cells according to their expression of specific proteins. However, sensitivity of this method is still limited since conventionally labeled antibodies can be conjugated with at maximum 1–10 dye molecules. This fact resulted in the need to develop new techniques in order to identify molecules which are expressed in very low but functionally relevant amounts. In the past, we have successfully used a liposome-based high-sensitivity immunofluorescence technique to measure the expression of low abundant membrane bound glucocorticoid receptors (mGR) on different cell types. The use of this technique allows the detection of as few as 50–100 antigen molecules per cell which is due to a 100-fold to 1000-fold increase in fluorescence signal intensity compared with conventional methods. The higher sensitivity is achieved since thousands of dye molecules can be enclosed in liposomes. Another modern high-sensitivity immunofluorescence staining method is the purchasable Fluorescence Amplification by Sequential Employment of Reagents (FASER) procedure. Here, we aimed at comparing sensitivity and specificity of these two techniques for the detection of the mGR. Our data demonstrate the FASER technique to be more sensitive and also more specific for the detection of mGR as compared to the liposome technique. However, both methods have advantages and disadvantages which are discussed in detail.     

Polymerization-Driven Photoluminescence in Alkanolamine-Based C-Dots

Carbonized polymer dots (CPDs), a peculiar type of carbon dots, show extremely high quantum yields, making them very attractive nanostructures for application in optics and biophotonics. The origin of the strong photoluminescence of CPDs resides in a complicated interplay of several radiative mechanisms. To understand the correlation between CPD processing and properties, the early stage formation of carbonized polymer dots has been studied. In the synthesis, citric acid monohydrate and 2-amino-2-(hydroxymethyl)propane-1,3-diol have been thermally degraded at 180 °C. The use of an oil bath instead of a more traditional hydrothermal reactor has allowed the CPD properties to be monitored at different reactions times. Transmission electron microscopy, time-resolved photoluminescence, nuclear magnetic resonance, infrared, and Raman spectroscopy have revealed the formation of polymeric species with amide and ester bonds. Quantum chemistry calculations have been employed to investigate the origin of CPD electronic transitions. At short reaction times, amorphous C-dots with 80 % quantum yield, have been obtained.     

Phosphinine-Based Ligands in Gold-Catalyzed Reactions

A series of substituted phosphinines, 1-phosphabarrelenes and 5-phosphasemibullvalenes were synthesized and evaluated for their potential application as ligands in homogeneous catalytic reactions. While their buried volume (%V_bur) was calculated to get insight into the steric properties, [LNi(CO)₃] complexes were prepared in order to determine the corresponding Tolman electronic parameter. ETS-NOCV (extended-transition-state natural orbital for chemical valence) calculations on [LAuCl] complexes further allowed an estimation of the σ- and π-contributions to the L− M interaction. Au^I coordination compounds of selected examples were prepared and characterized by single crystal X-ray diffraction. Finally, the three classes of P^III compounds were successfully used in the Au^I-catalyzed cycloisomerization of N-2-propyn-1-ylbenzamide, showing very good activities and selectivities, which are comparable with the reported data of cationic phosphorus-based gold catalysts.     

Tailoring the properties of electrospun PHBV mats: Co-solution blending and selective removal of PEO

Microstructure, surface topography, thermal and mechanical features of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) electrospun non-woven mats were modified, modulated and tailored through blending with different polyethylene oxide (PEO) amounts (20, 30 and 50% wt/wt). The optimal parameters of the soaking protocol for the selective removal of the sacrificial polymer were accurately identified by means of scanning electron microscopy (SEM), X-ray diffraction analysis (XRD), Fourier transform infrared attenuated total reflectance (FTIR-ATR) spectroscopy, simultaneous thermogravimetric and differential analyses (TG-DTA) and differential scanning calorimetry (DSC). The complete PEO removal after soaking in H₂O for 7 days with daily refreshment was confirmed. The resulting samples were only comprised of PHBV fibers characterized by a remarkable decrease of the average size with respect to the respective blends. Their surface topography was corrugated and rough and presented nodules, pits, nanopores, shallow and elongated nanostructured indents/grooves along the fiber axis. A remarkable reduction (>75%) of the tensile modulus (E) of electrospun PHBV mats (15–20 MPa) was obtained, maintaining comparable elongation at break (ε_max) values (20–30%).     

Optimization and validation of organochlorine compounds in adipose tissue by SPE‐gas chromatography

Scientific evidence has shown an association between organochlorine compounds (OCC) exposure and human health hazards. Concerning this, OCC detection in human adipose samples has to be considered a public health priority. This study evaluated the efficacy of various solid‐phase extraction (SPE) and cleanup methods for OCC determination in human adipose tissue. Octadecylsilyl endcapped (C₁₈‐E), benzenesulfonic acid modified silica cation exchanger (SA), poly(styrene‐divinylbenzene (EN) and EN/RP₁₈ SPE sorbents were evaluated. The relative sample cleanup provided by these SPE columns was evaluated using gas chromatography with electron capture detection (GC–ECD). The C₁₈‐E columns with strong homogenization were found to provide the most effective cleanup, removing the greatest amount of interfering substance, and simultaneously ensuring good analyte recoveries higher than 70%. Recoveries > 70% with standard deviations (SD) < 15% were obtained for all compounds under the selected conditions. Method detection limits were in the 0.003–0.009 mg/kg range. The positive samples were confirmed by gas chromatography coupled with tandem mass spectrometry (GC‐MS/MS). The highest percentage found of the OCC in real samples corresponded to HCB, o,p′‐DDT and methoxychlor, which were detected in 80 and 95% of samples analyzed respectively. Copyright © 2012 John Wiley & Sons, Ltd.     

Porphyrin decorated CdSe quantum dots for direct fluorescent sensing of metal ions

In this study, we report on a novel hybrid structure for the direct sensing of metal ions based on the use of CdSe quantum dots functionalized with tetrapyridyl-substituted porphyrin, a cation-selective carrier. It is shown that the porphyrin ion carrier coordinates to Cd atoms of the CdSe quantum dots through the Lewis basic pyridyl groups. The porphyrin-quantum dot ligation allows for the direct communication between the porphyrin and the underlying CdSe quantum structure. The quantum yield of CdSe is maintained despite the robust capping generated when the unmetallated porphyrins coordinate onto the quantum dots. Upon coordination with zinc ions, this porphyrin capping is shown to strongly contribute to the increase in the fluorescence efficiency of CdSe, via an activating interaction with the quantum dots surface. The results provide the grounds for the development of highly sensitive and selective nano-optode sensing systems.