Complexation of some univalent organic cations with hexaethyl p-tert-butylcalix[6]arene hexaacetate in nitrobenzene saturated water

From extraction experiments and γ-activity measurements, the exchange extraction constants corresponding to the general equilibrium C⁺(aq) + 1·Cs⁺(nb) ?1·C⁺ (nb) + Cs⁺(aq) taking place in the two–phase water–nitrobenzene system (C⁺ = methylammonium, ethylammonium, propylammonium, ethanolammonium, diethanolammonium, triethanolammonium, protonated tyramine, protonated dopamine, protonated DL–noradrenaline; 1 = hexaethyl p-tert-butylcalix[6]arene hexaacetate; aq = aqueous phase, nb = nitrobenzene phase) were evaluated. Furthermore, the stability constants of the 1·C⁺ complex species in nitrobenzene saturated with water were calculated; they were found to increase in the following cation order: protonated tyramine < protonated dopamine < triethanolammonium < diethanolammonium < protonated DL-noradrenaline < propylammonium < ethanolammonium < ethylammonium < methylammonium.     

Solvent extraction of Li+, H3O+ and NH4 + into nitrobenzene by using sodium dicarbollylcobaltate and calix[4]arene-bis(t-octylbenzo-18-crown-6)

From extraction experiments and $ \gamma $ -activity measurements, the exchange extraction constants corresponding to the general equilibrium M⁺ (aq) + NaL⁺ (nb) ? ML⁺ (nb) + Na⁺ (aq) taking place in the two–phase water–nitrobenzene system (M⁺= Li⁺, H₃O⁺, NH₄ ⁺; L = calix[4]arene-bis(t-octylbenzo-18-crown-6); aq = aqueous phase, nb = nitrobenzene phase) were evaluated. Furthermore, the stability constants of the ML⁺ complexes in nitrobenzene saturated with water were calculated; they were found to increase in the following cation order: H₃O⁺ < Li⁺ < NH₄ ⁺.     

Application of umbelliferone molecularly imprinted polymer in analysis of plant samples

The molecularly imprinted polymers (MIPs) were synthesised and the influence of the type of porogen, the nature of sample solvent, and the binding capacity of material were tested by high-performance liquid chromatography (HPLC). Umbelliferone was used as the template for imprint formation. Methacrylic acid was used as the monomer and acetonitrile, ethanol, and chloroform as porogen. Non-imprinted polymers (NIPs) were prepared by the same procedure. The highest value of the specific binding capacity (269 μg of umbelliferone per 100 mg of polymer) was obtained for polymers prepared in chloroform as porogen and methanol/water (φ _r = 1: 1) as the sample solvent. The group-selective MIP was used as sorbent for the SPE pre-treatment of umbelliferone from plant extracts prior to HPLC analysis. Analysis of the spiked samples showed good recoveries (> 77 %). The limit of detection, limit of determination, and repeatability of the method were also calculated.     

On the complexation of some univalent cations with 1,3-alternate-25,27-bis(1-octyloxy)calix[4]arene-crown-6 in nitrobenzene saturated with water

From extraction experiments and γ-activity measurements, the exchange extraction constants corresponding to the general equilibrium M⁺ (aq) + 1·Cs⁺ (nb) ? 1·M⁺ (nb) + Cs⁺ (aq) taking place in the two-phase water–nitrobenzene system (M⁺ = Ag⁺, K⁺, Rb⁺, Tl⁺; 1 = 1,3-alternate-25,27-bis(1-octyloxy)calix[4]arene-crown-6; aq is aqueous phase, nb is nitrobenzene phase) were determined. Moreover, the stability constants of the 1·M⁺ complexes in water-saturated nitrobenzene were calculated; they were found to increase in the series of K⁺ < Rb⁺ < Ag⁺ < Tl⁺.     

Development of 7TM receptor-ligand complex models using ligand-biased, semi-empirical helix-bundle repacking in torsion space: application to the agonist interaction of the human dopamine D2 receptor

Prediction of 3D structures of membrane proteins, and of G-protein coupled receptors (GPCRs) in particular, is motivated by their importance in biological systems and the difficulties associated with experimental structure determination. In the present study, a novel method for the prediction of 3D structures of the membrane-embedded region of helical membrane proteins is presented. A large pool of candidate models are produced by repacking of the helices of a homology model using Monte Carlo sampling in torsion space, followed by ranking based on their geometric and ligand-binding properties. The trajectory is directed by weak initial restraints to orient helices towards the original model to improve computation efficiency, and by a ligand to guide the receptor towards a chosen conformational state. The method was validated by construction of the β₁ adrenergic receptor model in complex with (S)-cyanopindolol using bovine rhodopsin as template. In addition, models of the dopamine D₂ receptor were produced with the selective and rigid agonist (R)-N-propylapomorphine ((R)-NPA) present. A second quality assessment was implemented by evaluating the results from docking of a library of 29 ligands with known activity, which further discriminated between receptor models. Agonist binding and recognition by the dopamine D₂ receptor is interpreted using the 3D structure model resulting from the approach. This method has a potential for modeling of all types of helical transmembrane proteins for which a structural template with sequence homology sufficient for homology modeling is not available or is in an incorrect conformational state, but for which sufficient empirical information is accessible.     

Methodological aspects of an off‐line combination of preparative isotachophoresis and high‐performance liquid chromatography with mass spectrometry in the analysis of biological matrices

This work reports on some methodological aspects of an off‐line combination of preparative ITP and HPLC with mass spectrometric detection (pITP‐HPLC‐MS) and its potential applications to the analysis of high molecular mass compounds present in complex biological matrices from the analytical chemistry perspective. Lysozyme served as the model analyte and human saliva as the complex biological matrix in this study. A mixture of five low‐molecular mass compounds was found and successfully used in the pITP experiments as discrete spacers to isolate the analyte from the interferents present in the complex biological matrix and to minimize their disturbance effect on the final MS analysis. The experiments at the pITP stage were performed in the cationic mode. On‐column conductivity detectors were used for the detection of ITP zones. Lysozyme was found in the human saliva samples using just deconvolution of the MS data after background correction. The MS data obtained from HPLC‐MS analysis of pITP fractions exhibited the great analytical potential of the combination of pITP‐HPLC‐MS resulting from the ITP clean‐up effect as well as the ITP preconcentration of the analyte present at low concentration levels in complex biological matrices.     

Enantioselective high-performance liquid chromatography of aryl-substituted oxazolines as an efficient tool for determination of chiral purity of serine medicinal components

A new approach for the evaluation of chiral purity of serine esterification products bearing long-chain alkyl substituents was developed. The compounds were simply converted to aryl-substituted oxazolines which: (i) facilitates effective chromatographic enantioseparation and (ii) enables direct detection using ultraviolet absorption. The method employs a polysaccharide-based chiral stationary phase and allows enantioseparation of highly stable oxazoline products in less than 6 min using a simple binary mobile phase. As opposed to the previously used normal phase method the developed method was performed in the reversed-phase mode. Aside from the benefits of switching to less hazardous solvents with regard to the principles of Green Chemistry, this has also led to a reduction in the analysis time. In comparison with known serine chromophores, the best enantioseparation of aryloxazoline rigid structure may be achieved only based on non-polar interactions with the chiral stationary phase. In contrast, the substitution of the chromophore moiety with hydroxyl substituent affected intra and intermolecular interactions that caused enantioseparation differences. Concurrently, we found high chirality retention of (R)- and (S)-configuration oxazoline standards (≥99% enantiomeric excess) during the introduction of the ultraviolet label. The method is suitable for rapid injection of the mixture containing the ultraviolet absorption marker without prior purification.     

Calix[4]arene-bis(t-octylbenzo-18-crown-6) as an extraordinarily effective macrocyclic receptor for the univalent thallium cation

From extraction experiments and $ \gamma $ -activity measurements, the exchange extraction constant corresponding to the equilibrium Tl⁺ (aq) + 1·Cs⁺ (org) ? 1·Tl⁺ (org) + Cs⁺ (aq) taking place in the two-phase water–phenyltrifluoromethyl sulfone (abbrev. FS 13) system (1 = calix[4]arene-bis(t-octylbenzo-18-crown-6); aq = aqueous phase, org = FS 13 phase) was evaluated as log K _ex (Tl⁺, 1·Cs⁺) = 1.7 ± 0.1. Further, the extraordinarily high stability constant of the 1·Tl⁺ complex in FS 13 saturated with water was calculated for a temperature of 25 °C: log β _org(1·Tl⁺) = 13.1 ± 0.2. Finally, by using quantum mechanical DFT calculations, the most probable structure of the cationic complex species 1·Tl⁺ was derived. In the resulting 1·Tl⁺ complex, the “central” cation Tl⁺ is bound by eight bond interactions to six oxygen atoms from the respective 18-crown-6 moiety and to two carbons of the corresponding two benzene rings of the parent receptor 1 via cation–π interaction.     

Thermal stability of nanocrystalline ε-Fe2O3

Thermal behavior of highly crystalline ε-Fe₂O₃ nanoparticles of different apparent crystallite sizes was characterized using thermogravimetry, differential thermal analysis, and analysis of evolved gas by mass spectrometry. Phase composition of the samples was monitored ex situ by X-ray powder diffraction. The results show that the thermal stability of this metastable iron oxide polymorph decreases with increasing particle size. For the particle diameter of 19(2) nm, the transformation temperature was equal to 794(5) °C, while for 28(2) nm only 755(10) °C. Surface of the nanoparticles contained adsorbed water and carbon dioxide. Elimination of these species proceeds in two steps. Water is removed at temperatures below 200 °C and CO₂ in the temperature range between 200 and 450 °C.