Determination trace amounts of thallium after separation and preconcentration onto nanoclay loaded with 1-(2-pyridylazo)-2-naphthol as a new sorbent

A procedure has been proposed for the separation and preconcentration of trace amounts of thallium. It is based on the adsorption of thallium ions onto organo nanoclay loaded with 1-(2-pyridylazo)-2-naphthol (PAN). Thallium ions were quantitatively retained on the column in the pH range of 3.5–6.0, whereas quantitative desorption occurs with 5.0?mL of 5% ascorbic acid and thallium was determined by flame atomic absorption spectrometry. Linearity was maintained between 0.66?ng?mL^?1–15.0?µg?mL^?1?in initial solution. Detection limit was 0.2?ng?mL^?1?in initial solution and preconcentration factor was 150. Eight replicate determinations of 2.0?µg?mL^?1 of thallium in final solution gave a relative standard deviation of ±1.48%. Various parameters have been studied, such as the effect of pH, breakthrough volume and interference of a large number of anions and cations and the proposed method was used to determine thallium ions in water and standard samples. Determination of thallium ions in standard sample showed that the proposed method has good accuracy.     

Switching adaptive controllers to control fractional‐order complex systems with unknown structure and input nonlinearities

This article investigates the chaos control problem for the fractional‐order chaotic systems containing unknown structure and input nonlinearities. Two types of nonlinearity in the control input are considered. In the first case, a general continuous nonlinearity input is supposed in the controller, and in the second case, the unknown dead‐zone input is included. In each case, a proper switching adaptive controller is introduced to stabilize the fractional‐order chaotic system in the presence of unknown parameters and uncertainties. The control methods are designed based on the boundedness property of the chaotic system's states, where, in the proposed methods the nonlinear/linear dynamic terms of the fractional‐order chaotic systems are assumed to be fully unknown. The analytical results of the mentioned techniques are proved by the stability analysis theorem of fractional‐order systems and the adaptive control method. In addition, as an application of the proposed methods, single input adaptive controllers are adopted for control of a class of three‐dimensional nonlinear fractional‐order chaotic systems. And finally, some numerical examples illustrate the correctness of the analytical results. © 2014 Wiley Periodicals, Inc. Complexity 21: 211–223, 2015     

Preparation of a solid-state ion-selective electrode based on polypyrrole conducting polymer for magnesium ion

In this study, a potentiometric sensor based on a pencil graphite electrode (PGE) coated with polypyrrole doped with Titan yellow dye (PPy/TY) was prepared for potentiometric determination of magnesium ion in aqueous solutions. The structural characteristics of magnesium sensor electrode (PGE/PPy/TYMg) were studied using scanning electron microscopy and Fourier transform infrared along with energy-dispersive spectroscopy. Under the optimal conditions, the electrode reveals a good Nernstian behavior with slope of 28.27 ± 0.40 mV per decade over the concentration range of 1.0 × 10^?5–5.0 × 10^?2 M and a detection limit of 6.28 × 10^?6 M. The potentiometric response of fabricated electrode toward magnesium ion was found to be independent of the pH of the test solution in the pH range of 4.5–8.0. The electrode showed fast response time (<10 s) and good shelf lifetime (>2 months). The prepared magnesium sensor electrode can also be used as an indicator electrode in potentiometric titration of Mg²⁺ with EDTA with distinguished end point. The electrode revealed good selectivity with respect to many cations including alkali, alkaline earth, transition and heavy metal ions. The introduced magnesium electrode was used for measurement of Mg²⁺ ion in real samples without any serious interferences from other ions.     

Introducing Organic Gas Steam-Liquid Extraction as a New Preconcentration Method for Benzene,Toluene, Ethylbenzene and Xylene Determination in Water Samples by Gas Chromatography-Flame Ionization Detection

Journal of Analytical Chemistry - In this study, for the first time, the organic gas steam-liquid extraction by a special hand-made cell was used as a simple and inexpensive preconcentration...     

Energy,exergy, and sensitivity analyses of a new integrated system for generation of liquid methanol,liquefied natural gas,and crude helium using organic Rankine cycle,and solar collectors

Journal of Thermal Analysis and Calorimetry - The increasing growth of helium consumption in industries and the limited resources of this element are the challenges that industries will face in the...     

A renewable approach to capture CO2 in Iran: thermodynamic and exergy analyses

Journal of Thermal Analysis and Calorimetry - This work presents numerical simulation of two-dimensional thermogravitational energy transport in a chamber filled with copper–water ( $${\hbox...     

Polyethylene Glycol Functionalized Graphene Oxide Nanoparticles Loaded with Nigella sativa Extract: A Smart Antibacterial Therapeutic Drug Delivery System

Flaky graphene oxide (GO) nanoparticles (NPs) were synthesized using Hummer’s method and then capped with polyethylene glycol (PEG) by an esterification reaction, then loaded with Nigella sativa (N. sativa) seed extract. Aiming to investigate their potential use as a smart drug delivery system against Staphylococcus aureus and Escherichia coli, the spectral and structural characteristics of GO-PEG NPs were comprehensively analyzed by XRD, AFM, TEM, FTIR, and UV- Vis. XRD patterns revealed that GO-PEG had different crystalline structures and defects, as well as a higher interlayer spacing. AFM results showed GONPs with the main grain size of 24.41 nm, while GONPs–PEG revealed graphene oxide aggregation with the main grain size of 287.04 nm after loading N. sativa seed extract, which was verified by TEM examination. A strong OH bond appeared in FTIR spectra. Furthermore, UV- Vis absorbance peaks at (275, 284, 324, and 327) nm seemed to be correlated with GONPs, GO–PEG, N. sativa seed extract, and GO –PEG- N. sativa extract. The drug delivery system was observed to destroy the bacteria by permeating the bacterial nucleic acid and cytoplasmic membrane, resulting in the loss of cell wall integrity, nucleic acid damage, and increased cell-wall permeability.     

Synthesis of 2D Germanane (GeH): a New,Fast, and Facile Approach

Germanane (GeH), a germanium analogue of graphane, has recently attracted considerable interest because its remarkable combination of properties makes it an extremely suitable candidate to be used as 2D material for field effect devices, photovoltaics, and photocatalysis. Up to now, the synthesis of GeH has been conducted by substituting Ca by H in a β‐CaGe₂ layered Zintl phase through topochemical deintercalation in aqueous HCl. This reaction is generally slow and takes place over 6 to 14 days. The new and facile protocol presented here allows to synthesize GeH at room temperature in a significantly shorter time (a few minutes), which renders this method highly attractive for technological applications. The GeH produced with this method is highly pure and has a band gap (E_g) close to 1.4 eV, a lower value than that reported for germanane synthesized using HCl, which is promising for incorporation of GeH in solar cells.     

Rating players in test match cricket

In general, the evaluation of player performance in test cricket is based on measures such as batting and bowling averages. These measures have a number of limitations, among which is that they fail to take into account the context in which runs are made or conceded and wickets are taken or given away. Furthermore, batting and bowling averages do not allow the comparison of performances in these two disciplines; this is because batting and bowling performances are measured using different metrics. With these issues in mind, we develop a new player rating system for test cricket. We use multinomial logistic regression to model match outcome probabilities session by session. We then use these probabilities to measure the overall contribution of players to the match outcome based on their individual batting, bowling and fielding contributions during each session. Our measure of contribution has the potential for rating players over time and for determining the ‘best’ player in a match, a series or a calendar year. We use results from 104 matches (2010–2012) to illustrate the method.     

含吡啶的大环席夫碱锰(Ⅱ)配合物:合成、表征及抗菌性质(英文)

在Mn髤模板作用下,2,6-diacetylpyridine(DAP)及合适链状胺化合物通过[1+1]环缩合反应,合成了3个大环席夫碱配合物,并进行了红外、元素分析、质谱及电导率等表征及研究。测得了配合物[MnL1(CH3CN)](ClO4)2的晶体结构,中心离子呈现出稍微扭曲的五角锥配位构型。研究了配合物对S.aureus(ATCC 6633),B.cereus(ATCC 7064),C.xerosis(ATCC 373)(gram-positive bacterial strains),E.coli(PTCC 10009),K.pneuomoniae(MTCC 109),and P.vulgaris(lio)(gram-negative bacterial strains)的抗菌活性。结果显示[MnL3](ClO4)2抗菌活性明显优于[MnL1(CH3CN)](ClO4)2and[MnL2](ClO4)2。在25℃条件下0.1 mol·L-1 KCl溶液中,通过电位计量法测定了化合物的质子化常数。