A renewable approach to capture CO2 in Iran: thermodynamic and exergy analyses

Journal of Thermal Analysis and Calorimetry - This work presents numerical simulation of two-dimensional thermogravitational energy transport in a chamber filled with copper–water ( $${\hbox...     

Polyethylene Glycol Functionalized Graphene Oxide Nanoparticles Loaded with Nigella sativa Extract: A Smart Antibacterial Therapeutic Drug Delivery System

Flaky graphene oxide (GO) nanoparticles (NPs) were synthesized using Hummer’s method and then capped with polyethylene glycol (PEG) by an esterification reaction, then loaded with Nigella sativa (N. sativa) seed extract. Aiming to investigate their potential use as a smart drug delivery system against Staphylococcus aureus and Escherichia coli, the spectral and structural characteristics of GO-PEG NPs were comprehensively analyzed by XRD, AFM, TEM, FTIR, and UV- Vis. XRD patterns revealed that GO-PEG had different crystalline structures and defects, as well as a higher interlayer spacing. AFM results showed GONPs with the main grain size of 24.41 nm, while GONPs–PEG revealed graphene oxide aggregation with the main grain size of 287.04 nm after loading N. sativa seed extract, which was verified by TEM examination. A strong OH bond appeared in FTIR spectra. Furthermore, UV- Vis absorbance peaks at (275, 284, 324, and 327) nm seemed to be correlated with GONPs, GO–PEG, N. sativa seed extract, and GO –PEG- N. sativa extract. The drug delivery system was observed to destroy the bacteria by permeating the bacterial nucleic acid and cytoplasmic membrane, resulting in the loss of cell wall integrity, nucleic acid damage, and increased cell-wall permeability.     

Synthesis of 2D Germanane (GeH): a New,Fast, and Facile Approach

Germanane (GeH), a germanium analogue of graphane, has recently attracted considerable interest because its remarkable combination of properties makes it an extremely suitable candidate to be used as 2D material for field effect devices, photovoltaics, and photocatalysis. Up to now, the synthesis of GeH has been conducted by substituting Ca by H in a β‐CaGe₂ layered Zintl phase through topochemical deintercalation in aqueous HCl. This reaction is generally slow and takes place over 6 to 14 days. The new and facile protocol presented here allows to synthesize GeH at room temperature in a significantly shorter time (a few minutes), which renders this method highly attractive for technological applications. The GeH produced with this method is highly pure and has a band gap (E_g) close to 1.4 eV, a lower value than that reported for germanane synthesized using HCl, which is promising for incorporation of GeH in solar cells.     

含吡啶的大环席夫碱锰(Ⅱ)配合物:合成、表征及抗菌性质(英文)

在Mn髤模板作用下,2,6-diacetylpyridine(DAP)及合适链状胺化合物通过[1+1]环缩合反应,合成了3个大环席夫碱配合物,并进行了红外、元素分析、质谱及电导率等表征及研究。测得了配合物[MnL1(CH3CN)](ClO4)2的晶体结构,中心离子呈现出稍微扭曲的五角锥配位构型。研究了配合物对S.aureus(ATCC 6633),B.cereus(ATCC 7064),C.xerosis(ATCC 373)(gram-positive bacterial strains),E.coli(PTCC 10009),K.pneuomoniae(MTCC 109),and P.vulgaris(lio)(gram-negative bacterial strains)的抗菌活性。结果显示[MnL3](ClO4)2抗菌活性明显优于[MnL1(CH3CN)](ClO4)2and[MnL2](ClO4)2。在25℃条件下0.1 mol·L-1 KCl溶液中,通过电位计量法测定了化合物的质子化常数。     

聚(4-乙烯基吡啶)硫酸氢盐: 一个新的高效催化剂用于无溶剂条件下合成13-芳香基-茚并 [1,2-b] 石脑油 [1,2-e] 吡喃-12(13H)-酮（英文）

An facile and efficient protocol for the synthesis of 13‐aryl‐indeno[1,2‐b]naphtha[1,2‐e]pyran‐ 12(13H)‐ ones has been developed that proceeds via the one‐pot three‐component sequential reaction of an aromatic aldehyde with β‐naphthol and 2H‐indene‐1,3‐dione under solvent‐free conditions in the presence of a poly(4‐vinylpyridinium)hydrogen sulfate(P(4‐VPH)HSO4) catalyst. The catalyst can be reused several times, making this procedure facile, practical, and sustainable. The simple experimental procedure, solvent‐free reaction conditions, use of an inexpensive catalyst, short react time, and excellent yields are some of the major advantages of this methodology.     

二氧化硫脲:一锅合成吡喃并[4,3-b] 吡喃类化合物的高效可重复使用有机催化剂（英文）

A series of pyrano[4,3‐b]pyran derivatives have been synthesized in excellent yields by the reaction of aromatic aldehydes with malononitrile or cyanoacetate and 4‐hydroxy‐6‐methylpyran‐2‐one in water at 80 °C, with the transformation being catalyzed by an aqueous solution of thiourea dioxide(TUD). Upon completion of the reaction, the product was isolated by filtration or extraction and the remaining aqueous TUD solution could be reused several times without any discernible impact on its catalytic activity. This procedure offers several advantages over existing procedures, including high yields, operational simplicity, the use of a non‐toxic catalyst and solvent, short reaction time and minimum pollution of the environment, making it a useful and attractive process for the preparation of pyrano[4,3‐b]pyran derivatives.     

Controllable one-step synthesis of ZnO nanostructures using molybdophosphoric acid

ZnO nanostructures were synthesised in a hydrothermal reaction of zinc acetate in the presence of molybdophosphoric acid (H₃[PMo₁₂O₄₀]) as well as its vanadium-substituted acid (H₄[PMo₁₁VO₄₀]) at various times, temperatures, and concentrations. The ZnO nanostructures were characterised by X-ray diffraction, transmission electron microscopy, and Fourier transform infrared spectroscopy. The results demonstrated that the synthesised products are crystalline with a zincite hexagonal phase. Various ZnO nanostructures, such as nanoparticles, microrods, and nanosheets, were produced by changing the experimental conditions. The photocatalytic degradation of methyl orange was also investigated using the ZnO nanoparticles thus prepared. These particles exhibited high performance in the photocatalytic degradation of MO and almost 100 % decolourisation occurred within only 20 min.     

An eco-friendly catalytic route for one-pot synthesis of 2-amino-6-(2-oxo-2Hchromen-3-yl)-4-arylnicotinonitrile derivatives by silica-supported perchloric acid (HClO4–SiO2) under solvent-free conditions

A facile and environmentally benign synthesis of some 2-amino-6-(2-oxo-2H-chromen-3-yl)-4-arylnicotinonitrile derivatives from the reaction of 3-acetylcoumarin, aromatic aldehydes, and malononitrile under solvent-free condition in the presence of silica-supported perchloric acid (HClO₄–SiO₂) is described. The ability to reuse the catalyst, the high yields, and ease of purification are the important features of this process.     

Copper-catalyzed domino reaction between terminal alkynes,isocyanates, and oxiranes: An atom-economic route to morpholine derivatives

In situ generated copper acetylides react with isocyanates and oxiranes to form a decent range of morpholine derivatives. The reactions proceeded with acceptable yields and excellent regioselectivity. The presence of oxygen and moisture completely inhibited the reaction. The scope of the reaction is wide and the reactions involve consecutive C–C, C–N, and C–O bond formations.     

Biochar-Based Graphitic Carbon Nitride Adorned with Ionic Liquid Containing Acidic Polymer: A Versatile,Non-Metallic Catalyst for Acid Catalyzed Reaction

A novel biochar-based graphitic carbon nitride was prepared through calcination of Zinnia grandiflora petals and urea. To provide acidic and ionic-liquid functionalities on the prepared carbon, the resultant biochar-based graphitic carbon nitride was vinyl functionalized and polymerized with 2-acrylamido-2-methyl-1-propanesulfonic acid, acrylic acid and the as-prepared 1-vinyl-3-butylimidazolium chloride. The final catalytic system that benefits from both acidic (–COOH and –SO₃H) and ionic-liquid functionalities was applied as a versatile, metal-free catalyst for promoting some model acid catalyzed reactions such as Knoevenagel condensation and Biginelli reaction in aqueous media under a very mild reaction condition. The results confirmed high activity of the catalyst. Broad substrate scope and recyclability and stability of the catalyst were other merits of the developed protocols. Comparative experiments also indicated that both acidic and ionic-liquid functionalities on the catalyst participated in the catalysis.