Evaluation of antioxidants on the thermo-oxidative stability of soybean biodiesel

This work shows the evaluation of three antioxidants (2,6-di-t-butyl-4-methylphenol (BHT)—synthetic antioxidant, hydrogenated cardanol (HC), and alkyl hydrogenated cardanol (AHC)—both derived from cashew nut shell liquid) on the thermo-oxidative stability of the soybean biodiesel. The antioxidants were added at concentrations of 200, 300, and 400 ppm, and the oxidative stability of the biofuel with and without antioxidants were investigated by thermogravimetric analysis (TG-DTG and IPDT) and Metrohm 743 Rancimat per the EN 14112 method. The results showed that all antioxidants contributed for the thermo-oxidative stability of the soybean biodiesel as follows: soybean biodiesel < soybean biodiesel + BHT < soybean biodiesel + HC < soybean biodiesel + AHC. In the Rancimat method, the results showed that the antioxidants influenced the biodiesel stability with an increase of at least 71 %.     

Low‐Level Laser Therapy Restores the Oxidative Stress Balance in Acute Lung Injury Induced by Gut Ischemia and Reperfusion

It remains unknown if the oxidative stress can be regulated by low‐level laser therapy (LLLT) in lung inflammation induced by intestinal reperfusion (i‐I/R). A study was developed in which rats were irradiated (660 nm, 30 mW, 5.4 J) on the skin over the bronchus and euthanized 2 h after the initial of intestinal reperfusion. Lung edema and bronchoalveolar lavage fluid neutrophils were measured by the Evans blue extravasation and myeloperoxidase (MPO) activity respectively. Lung histology was used for analyzing the injury score. Reactive oxygen species (ROS) was measured by fluorescence. Both expression intercellular adhesion molecule 1 (ICAM‐1) and peroxisome proliferator‐activated receptor‐y (PPARy) were measured by RT‐PCR. The lung immunohistochemical localization of ICAM‐1 was visualized as a brown stain. Both lung HSP70 and glutathione protein were evaluated by ELISA. LLLT reduced neatly the edema, neutrophils influx, MPO activity and ICAM‐1 mRNA expression. LLLT also reduced the ROS formation and oppositely increased GSH concentration in lung from i‐I/R groups. Both HSP70 and PPARy expression also were elevated after laser irradiation. Results indicate that laser effect in attenuating the acute lung inflammation is driven to restore the balance between the pro‐ and antioxidants mediators rising of PPARy expression and consequently the HSP70 production.     

Effect of the pore geometry in the characterization of the pore size distribution of activated carbons

In this work, the characterization of Activated Carbons (AC) by using the independent pore models is discussed, with special emphasis on the issue of how the assumed pore geometry can affect the resulting Pore Size Distribution (rPSD) and on the problem of the unicity of the PSD when different probe molecules are used in adsorption experiments. A theoretical test was performed using virtual solids based in the so-called Mixed Geometry Model (MGM) (Azevedo et al. 2010). The MGM uses a kernel of adsorption isotherms generated by GCMC for different pore sizes and two pore geometries: slit and triangular. The adsorption isotherms of a virtual MGM solid were fitted with both the traditional Slit Geometry Model (SGM) and the Mixed Geometry Model (MGM). It is demonstrated that, by assuming a different pore geometry model from that of the real sample, different PSDs may be obtained by fitting adsorption isotherms of different probe gases. Finally, experimental results are shown which both point toward the MGM as an acceptable extension of the SGM and confirm that the MGM is a closer representation of the actual porous structure of most activated carbons.     

Electrocatalysis of oxygen reduction on glassy carbon electrodes modified with anthraquinone moieties

Anthraquinone groups were electrochemically grafted to glassy carbon (GC) electrodes via methylene linker to study the oxygen reduction reaction (ORR) in alkaline medium. Two different anthraquinone derivatives, 2-bromomethyl-anthraquinone or 2-chloromethyl-anthraquinone, were used to modify the GC electrode surface. Several modification conditions encompassing potential cycling and electrolysis at a fixed potential were employed in order to vary the surface concentration of MAQ groups (Γ _MAQ) and to study the dependence of the O₂ reduction behaviour on electrografting procedure. Cyclic voltammetry confirmed the presence of anthraquinone moieties attached to the GC electrode and Γ _MAQ varied in the range of (0.5–2.4)?×?10^?10 mol cm^?2. Oxygen reduction was studied on MAQ-modified GC electrodes of various surface coverage using the rotating disc electrode (RDE) and rotating ring-disc electrode (RRDE) methods. The RDE and RRDE results of O₂ reduction reveal that GC/MAQ electrodes show rather similar electrocatalytic behaviour towards the ORR yielding hydrogen peroxide as the final product.     

CO2 Capture by Hydroxylated Azine-Based Covalent Organic Frameworks

Covalent organic frameworks (COFs) RIO-13, RIO-12, RIO-11, and RIO-11m were investigated towards their CO₂ capture properties by thermogravimetric analysis at 1 atm and 40 °C. These microporous COFs bear in common the azine backbone composed of hydroxy-benzene moieties but differ in the relative number of hydroxyl groups present in each material. Thus, their sorption capacities were studied as a function of their textural and chemical properties. Their maximum CO₂ uptake values showed a strong correlation with an increasing specific surface area, but that property alone could not fully explain the CO₂ uptake data. Hence, the specific CO₂ uptake, combined with DFT calculations, indicated that the relative number of hydroxyl groups in the COF backbone acts as an adsorption threshold, as the hydroxyl groups were indeed identified as relevant adsorption sites in all the studied COFs. Additionally, the best performing COF was thoroughly investigated, experimentally and theoretically, for its CO₂ capture properties in a variety of CO₂ concentrations and temperatures, and showed excellent isothermal recyclability up to 3 cycles.     

Improvement of permanent memory effect in PDLC films using TX-100 as an additive

A number of polymer dispersed liquid crystal (PDLC) films based on dimethacrylate monomers were synthesised by polymer-induced phase separation (PIPS) using polyethylene glycol p-(1,1,3,3-tetramethylbutyl)-phenyl ether (TX-100) as an additive up to total solution weight of 10% aiming to modify the initial anchorage force of the liquid crystal (LC) molecules to the polymeric matrix. The effects of the addition of this additive to the PDLC films were studied resorting to electro-optical studies. Using a fitting model, several parameters were correlated such as the permanent memory effect (PME), the voltage required to achieve 90% of maximum transmittance (E90), the average elastic constant (K) and the rotational viscosity of the director (γ). The use of TX-100 results on an increase on the PME and γ, and decrease on the E90 and K.     

Silicon polypodands: powerful metal cation complexing agents and solid-liquid phase-transfer catalysts of new generation

Silicon polypodands 5-7 are found to be powerful complexing agents of alkali metal salts in low polarity solvents and very efficient catalysts in anion-promoted reactions under solid-liquid PTC conditions. The catalytic activity is comparable with that of the cyclic polyether PHDB18C6 8.     

Supershell structure in alkali metal nanowires

Nanowires are formed by indenting and subsequently retracting two pieces of sodium metal. Their cross section gradually reduces upon retraction and the diameters can be obtained from the conductance. In previous work we have demonstrated that when one constructs a histogram of diameters from large numbers of indentation-retraction cycles such histograms show a periodic pattern of stable nanowire diameters due to shell structure in the conductance modes. Here, we report the observation of a modulation of this periodic pattern, in agreement with predictions of a supershell structure.     

Complete assignment of NMR data of 22 phenyl‐1H‐pyrazoles' derivatives

Complete assignment of ¹H and ¹³C NMR chemical shifts and J(¹H/¹H and ¹H/¹⁹F) coupling constants for 22 1‐phenyl‐1H‐pyrazoles' derivates were performed using the concerted application of ¹H 1D and ¹H, ¹³C 2D gs‐HSQC and gs‐HMBC experiments. All 1‐phenyl‐1H‐pyrazoles' derivatives were synthesized as described by Finar and co‐workers. The formylated 1‐phenyl‐1H‐pyrazoles' derivatives were performed under Duff's conditions. Copyright © 2011 John Wiley & Sons, Ltd.