A Titration Microcalorimetric Study of the Effects of Halide Counterions on Vesicle-Forming Aggregation in Aqueous Solution of Branched-Chain Alkylpyridinium Surfactants

Titration microcalorimetry is used to study the influences of iodide, bromide, and chloride counterions on the aggregation of vesicle-forming 1-methyl-4-(2-pentylheptyl)pyridinium halide surfactants. Formation of vesicles by these surfactants was characterised using transmission electron microscopy. When the counterion is changed at 303 K through the series iodide, bromide, to chloride, the critical vesicular concentration (cvc) increases and the enthalpy of vesicle formation changes from exo- to endothermic. With increase in temperature to 333 K, vesicle formation becomes strongly exothermic. Increasing the temperature leads to a decrease in enthalpy and entropy of vesicle formation for all three surfactants. However the standard Gibbs energy for vesicle formation is, perhaps surprisingly, largely unaffected by an increase in temperature, as a consequence of a compensating change in both standard entropy and standard enthalpy of vesicle formation. Interestingly, standard isobaric heat capacities of vesicle formation are negative, large in magnitude but not strikingly dependent on the counterion. We conclude that the driving force for vesicle formation can be understood in terms of overlap of the thermally labile hydrophobic hydration shells of the alkyl chains. Copyright 2000 Academic Press.     

Titanium as a chemical modifier for the determination of cobalt in marine sediments

The determination of cobalt in marine sediments by electrothermal atomic absorption spectrometry was studied using no modifier and magnesium and titanium as modifiers. Titanium is one of the major sediment constituents, which widely affects the cobalt determination and it was studied as a chemical modifier since it was the only concomitant that increased the cobalt signal in the concentration range usually found in sediments. The performance of Mg and Ti as chemical modifiers was compared relative to maximum pyrolysis and atomization temperatures, linear calibration range, sensitivity and matrix effects. The pyrolysis curves showed that the analyte could be stabilized up to 1400 °C when either Ti or Mg(NO₃)₂ was present, while only 1000 °C could be used in the absence of a modifier. The optimum atomization temperature was 2500 °C in all cases. Analytical curves were compared using no modifier, 5 μg Ti and 100 μg Mg(NO₃)₂ as modifiers, and the linear range found was up to approximately 4 ng Co whether a modifier was used or not. With Ti as a chemical modifier, analytical curves for cobalt in aqueous solution and in a synthetic matrix resulted in the same sensitivity (m₀=55 pg), whereas the use of Mg led to characteristic mass values of 59 and 72 pg in aqueous solution and in a synthetic matrix, respectively, showing some matrix effect. The detection limits (3σ, n=10) were 0.4 μg g⁻¹ using no modifier and 0.3 μg g⁻¹ with Ti as a modifier in the original matrix. A reference estuarine sediment NIST 1646 with a non-certified content of 10.5 μg g⁻¹ Co was analyzed and the found value of 10.9±2.4 μg g⁻¹, (n=3), using Ti as chemical modifier and calibration against aqueous standards, was in good agreement with the recommended value.     

A sol-gel route for the development of rare-earth aluminum borate nanopowders and transparent thin films

A new sol-gel route was applied to obtain Y_0.9Er_0.1Al₃(BO₃)₄ crystalline powders and amorphous thin films by using Al(acac)₃, B(OPrⁱ)₃, Y(NO₃)₃·6H₂O, and Er(NO₃)₃·5H₂O as starting materials dissolved in propionic acid and ethyl alcohol mixtures. Our study shows that propionic acid acts as good chelant agent for yttrium and erbium ions while ethyl alcohol allows to dissolve Al(acac)₃. This process makes the resulting sols very stable to obtain homogeneous gels and transparent amorphous thin films. In addition, the propionic acid prevents the sol precipitation, making easy porous- and crack-free thin film depositions. Chemical reactions involved in the complexation were discussed. As-prepared powders and films are amorphous and present a good thermal stability due to their high glass transition (746 °C) and crystallization temperatures (830 °C). This new sol-gel route showed to be adequate to obtain dense and crack-free thin films free of organic and hydroxyl groups that can be considered as promising materials to be used in integrated optical systems.     

Effects of Adsorbed Polyaniline on Redox Process on MoO3 Surface

The effects exhibited by adsorbed conducting polyaniline on the redox process on a molybdenum oxide surface were studied. Thermogravimetric results indicate a 4% polyaniline deposition. Cyclic voltammograms of the adsorbed polymer on MoO3 show that polyaniline exerts remarkable effects on the molybdenum blue oxidation-reduction process, with oxidation and reduction potentials of 0.33 and 0.18 V, respectively. This effect strongly enhances the electrode response, and can be used as an important tool in qualitative and/or quantitative determinations of molybdenum in solution as well as in any substrate. Copyright 1999 Academic Press.     

Antiedematogenic activity of two thiazolidine derivatives: N-tryptophyl-5-(3,5-di-tert-butyl-4-hydroxybenzylidene) rhodanine (GS26) and N-tryptophyl-5-(3,5-di-tert-butyl-4-hydroxybenzylidene)-2,4-thiazolidinedione (GS28)

The search for new anti-inflammatory drugs has been constant in several research centers. The use of the Bioisostery concept allows the elaboration of new bioactive compounds with different properties through the introduction of substitute groups in one or more positions of a main molecule with known biological activity. Preliminary works accomplished at our laboratory with 2,4-thiazolidinedione isosters demonstrated inhibitory activity on edema formation for N-tryptophyl-5-(3,5-di-tert-butyl-4-hydroxybenzylidene)-2,4-thiazolidinedione (GS28) and N-tryptophyl-5-(3,5-di-tert-butyl-4-hydroxybenzylidene) rhodanine (GS26). We verified the antiedematogenic and ulcerogenic activity of these two compounds in Wistar rats. The carrageenan induced paw edema suffered significant (p<0.05) inhibition (28.36% on average) for GS28 (100 mg/kg; v.o.) during the entire time of the experiment. GS26 (50 and 100 mg/kg; v.o.) significantly inhibited (p<0.05) the paw edema dextran induced (22.1 and 27.8%, for the respective doses) after 180 min. The compounds GS26 and GS28 did not show ulcerogenic activity on gastric mucous. The results suggest antiedematogenic action for both compounds without the appearance of gastric lesions.     

Thermal evaluation of cashew nutshell liquid as new bioadditives for poly(methyl methacrylate)

In this study, the thermal-oxidative stability of poly(methyl methacrylate), PMMA, 1 % additivated with replenishable phenolic lipids is evaluated by thermogravimetric (TG/DTG) analyses and differential scanning calorimetry (DSC) analyses. Since technical cashew nutshell liquid (CNSL), a byproduct from the cashew industry, is composed basically of two phenolic lipids, cardanol and cardol, the utilization of this industrial waste and its main components as a new source of bioadditives for use as antioxidants is evaluated. The TG analyses revealed that addition of the phenolic constituent of CNSL increased the thermal stability of PMMA films considerably. The results obtained were also confirmed by DSC analyses.     

On-off scheduling schemes for power-constrained electric vehicle charging

In this paper, we study the problem of establishing a dynamic charging schedule of electric vehicles (EVs) at a charging station, assuming that limited power implies that only a limited number of EVs can charge simultaneously. The only control we assume to be available to the charging station is the ability to (at any given time) turn on or off the power supply to any EV, with this tool we want to develop a charging schedule that will satisfy the energy demands of the EVs in their intended deadlines. We propose two distinct approaches to this problem: a discretized time version, based on a greedy-like algorithm, and a continuous time version, based on linear programming. We compare these two approaches and numerically study the improvement they yield in the efficiency of the charging procedure, when applied to simulated data based on real parking data. Finally, we illustrate the flexibility of the models by sketching several possible extensions.     

Validation of new methodology for the definition of tolerance limits of critical properties in fuels handled in terminals and pipelines—giveaway: compliance with the specification

Accreditation and Quality Assurance - In any commercial transaction, the presence of tolerances from specification limits is essential to ensure that the true value of the property of interest is...     

Dual catalytic performance of arene-ruthenium amine complexes for norbornene ring-opening metathesis and methyl methacrylate atom-transfer radical polymerizations

Arene ruthenium(II) complexes bearing the cyclic amines RuCl₂(η⁶-p-cymene)(pyrrolidine)] ( 1 ), [RuCl₂(η⁶-p-cymene)(piperidine)] ( 2 ), and [RuCl₂(η⁶-p-cymene)(peridroazepine)] ( 3 ) were successfully synthesized. Complexes 1 – 3 were fully characterized by means of Fourier transform infrared, UV–visible, and NMR spectroscopy, elemental analysis, cyclic voltammetry, computational methods, and one of the complexes was further studied by single crystal X-ray crystallography. These compounds were evaluated as catalytic precursors for ring-opening metathesis polymerization (ROMP) of norbornene (NBE) and atom-transfer radical polymerization (ATRP) of methyl methacrylate (MMA). NBE polymerization via ROMP was evaluated using complexes 1 – 3 as precatalysts in the presence of ethyl diazoacetate (EDA) under different [NBE]/[EDA]/[Ru] ratios, temperatures (25 and 50°C), and reaction times (5–60 min). The highest yields of polyNBE were obtained with [NBE]/[EDA]/[Ru] = 5000/28/1 for 60 min at 50°C. MMA polymerization via ATRP was conducted using 1 – 3 as catalysts in the presence of ethyl-α-bromoisobutyrate (EBiB) as initiator. The catalytic tests were evaluated as a function of the reaction time using the initial molar ratio of [MMA]/[EBiB]/[Ru] = 1000/2/1 at 95°C. The increase in molecular weight as function of time indicates that complexes 1–3 were able to mediate the MMA polymerization with an acceptable rate and some level of control. Differences in the rate of polymerization were observed in the order 3 > 2 > 1 for the ROMP and ATRP.     

Macrocyclic Polyethers as Enolate Activators in Homogeneous and Heterogeneous Systems

Abstract

The ability of macrocyclic polyethers to activate enolates has been studied in the alkylation of de-oxybenzoin (1) with butyl derivatives nBuY (Y = Br, I, OMes) catalyzed by crown ether PHDB18C6 (7) or cryptand [2.2.2,C10] (8) under phase-transfer catalysis (PTC) and homogeneous (chlorobenzene) conditions. The enolate reactivity is mainly determined by the ligand (cryptand > crown ether) and solvent (increasing with the polarity, in the order: toluene < chlorobenzene < 1,2dichlorobenzene). Regioselectivity of the reaction is also remarkably affected by ligand and alkylating agent.