Determination of trace elements in biological tissues by aluminum block digestion and spike-height flame atomic absorption spectrometry

A method for the determination of cadmium, copper, lead, and zinc in biological tissues using small volumes of digest is described. An aluminium heating block is used to digest samples and elements are determined by spike-height flame atomic absorption spectrometry. Interferences have been assessed and the sample decomposition procedure evaluated.     

Arsenic compounds in a marine food chain

A three-organism food chain within a rock pool at Rosedale, NSW, Australia, was investigated with respect to arsenic compounds by high performance liquid chromatography – hydraulic high pressure nebulization – inductively coupled plasma mass spectrometry (HPLC-HHPN-ICP-MS). Total arsenic concentration was determined in the seaweed Hormosira banksii (27.2 μg/g dry mass), in the gastropod Austrocochlea constricta (74.4 μg/g dry mass), which consumes the seaweed, and in the gastropod Morula marginalba (233 μg/g dry mass), which eats Austrocochlea constricta. The major arsenic compounds in the seaweed were (2′R)-dimethyl[1-O-(2′,3′-dihydroxypropyl)-5-deoxy-β-d-ribofuranos-5-yl]arsine oxide and an unidentified compound. The herbivorous gastropod Austrocochlea constricta transformed most of the arsenic taken up with the seaweed to arsenobetaine. Traces of arsenite, arsenate, dimethylarsinic acid, arsenocholine, the tetramethylarsonium cation, and several unknown arsenic compounds were detected. Arsenobetaine accounted for 95% of the arsenic in the carnivorous gastropod Morula marginalba. In Morula marginalba the concentration of arsenocholine was higher, and the concentrations of the minor arsenic compounds lower than in the herbivorous gastropod Austrocochlea constricta.     

Effect of the Coil Angle in an Inductively Coupled Plasma Torch: A Novel Two-Dimensional Model

A two-dimensional model has been developed for the calculation of the electromagnetic (EM) fields generated by spiral coil currents, in order to obtain a better representation of the actual configuration used in a typical inductively coupled plasma (ICP) torch. In order to obtain the EM fields in a two-dimensional model, the change of EM field in tangential direction is neglected and the coil is assumed to be a concentric cylinder. In order to justify our assumption, the EM, flow and temperature fields resulting from five-ring coil and concentric cylinder coil are compared and the results are almost the same except for the EM field in the vicinity of the coil. In the case of the spiral coil, the coil current is inclined with respect to the horizontal plane. Therefore current in the cylinder coil is assumed to have the same inclined angle, which is split into tangential and axial components. The axial electric field and hence an axial current in plasma is induced by the axial component of the spiral coil current. Charge density is accumulated in the plasma, since the axial current cannot form a loop. In order to obtain the EM field and the charge distribution in the plasma generated by the spiral coil, the equations of axial vector potential and electrostatic potential have been derived. Due to the swirling Lorentz force (J_z×B_r) an axisymmetrical swirling fluid model is used to simulate the plasma flow in an axisymetrical configuration. With an inclined angle of the coil current being 3.7° and the frequency being 3 MHz, computational results show that the swirling Lorentz force causes plasma swirling with a maximum speed of 3.41 m/s near the plasma center when the injected sheath gas and central gas are not swirling. In these conditions, the real and imaginary parts of the maximum electrostatic potential are 0.95 V and 1.66 V, respectively. When the electrostatic field is neglected, the swirling velocity of the plasma is 3.95 m/s.     

Determination of total arsenic by use of a zinc-column arsine generator

A method for the measurement of total arsenic in extracts of environmental materials is described. Arsenic is reduced to arsine with a zinc reductor column, the evolved arsine is decomposed in a heated carbon-tube furnace, and arsenic determined by measurement of its atomic-absorption at 193.7 nm. The detection limit is 0.002 mug/ml and the coefficient of variation is 1.4% at 0.01 mug/ml.     

A microwave-assisted sequential extraction of water and dilute acid soluble arsenic species from marine plant and animal tissues

This paper describes the use of dilute nitric acid for the extraction and quantification of arsenic species. A number of extractants (e.g. water, 1.5 M orthophosphoric acid, methanol-water and dilute nitric acid) were tested for the extraction of arsenic from marine biological samples, such as plants that have proved difficult to quantitatively extract. Dilute 2% (v/v) nitric acid was found to give the highest recoveries of arsenic overall and was chosen for further optimisation. The optimal extraction conditions for arsenic were 2% (v/v) HNO₃, 6 min⁻¹, 90 °C. Arsenic species were found to be stable under the optimised conditions with the exception of the arsenoriboses which degraded to a product eluting at the same retention time as glycerol arsenoribose. Good agreement was found between the 2% (v/v) HNO₃ extraction and the methanol-water extraction for the certified reference material DORM-2 (AB 17.1 and 16.2 μg g⁻¹, respectively, and TETRA 0.27 and 0.25 μg g⁻¹, respectively), which were in close agreement with the certified concentrations of AB 16.4 ± 1.1 μg g⁻¹ and TETRA 0.248 ± 0.054 μg g⁻¹.To preserve the integrity of arsenic species, a sequential extraction technique was developed where the previously methanol-water extracted pellet was further extracted with 2% (v/v) HNO₃ under the optimised conditions. Increases in arsenic recoveries between 13% and 36% were found and speciation of this faction revealed that only inorganic and simple methylated species were extracted.     

Solochrome Violet R als Reagens zur spektrophotometrischen Bestimmung von Mikrogrammengen Molybd?n

Zusammenfassung In der vorliegenden Arbeit wird eine rasche und genaue spektrophotometrische Bestimmung von Mikrogrammengen MolybdÄn beschrieben. Als Reagens wird der Azofarbstoff Solochrome Violet R verwendet. Dieser bildet mit MolybdÄn in sehwach salzsaurem Medium einen rotgefÄrbten Komplex, der selbst bei Anwesenheit von ÄDTA bestÄndig ist. Dadurch ist es möglich, den störenden Einflu\ anderer Ionen, z. B. den des Zirkoniums, auszuschalten. Mit dieser Methode lassen sich noch 2,0 g MolybdÄn/10 ml Me\lösung mit relativ hoher Genauigkeit bestimmen.Wir danken Herrn Prof. Dr. F. Hecht für seine Unterstützung, die für das Zustandekommen dieser Arbeit von gro\em Nutzen war.     

Gas-phase thermolysis of condensed-1,2,4-triazines: interesting routes toward heterocyclic ring systems

Gas-phase thermolysis of thieno[2,3-e][1,2,4]triazines gave benzonitrile, isothiazole, pyridazine, and thieno[2,3-d]thiazole derivatives. Similar transformation of benzo[1,2,4]triazine and phenanthro[9,10-e][1,2,4]triazine derivatives into their corresponding condensed thiazoles has been achieved by heating at 350 °C with sulfur. A mechanism for these pyrolytic transformations was proposed.     

Low volume microwave digestion for the determination of selenium in marine biological tissues by graphite furnace atomic absorption spectroscopy

A microwave digestion method for the determination of marine biological tissues has been developed to allow determination of selenium in small sample sizes (< 0.1 g). The benefits of this technique include maintaining concentrates in extracts without the subsequent over dilution encountered when using larger vessels, increased sample throughput and reduced loss of volatile material. Freeze dried biological material (< 0.1 g) and nitric acid (1 ml) were placed into 7 ml screw top Teflon vessels which are completely sealed on capping. Two 7 ml vials were placed into larger 120 ml vessels fitted with a Teflon spacer and 10 ml of distilled water. The effects of microwave power and time, and sample mass on selenium recovery from three marine standard reference materials (NIST SRM 1566a Oyster Tissue, NRCC DORM-1 Dogfish Muscle and NRCC TORT-1 Lobster Hepatopancreas) were examined. The optimum conditions: 600 W, 2 min; 0 W, 2 min; 450 W, 45 min, allowed quantitative recoveries of selenium from these and three other standard reference materials (NRCC DOLT-1 Dogfish liver, NIST RM-50 Albacore tuna and IAEA MA-A-2 fish flesh). Studies on sample mass showed that the analysis of sample masses from 0.025 to 0.1 g gave selenium concentrations within the certified range. Six species of selenium: selenite, selenate, selenomethionine, selenocysteine, selenocystamine, and trimethyl selenonium were added to oyster, dogfish, and lobster tissues. Recoveries were near quantitative for all species (94–105%) except trimethyl selenonium (90–101%).