Linear 6,6'-biazulenyl framework featuring isocyanide termini: synthesis, structure, redox behavior, complexation, and self-assembly on Au(111)

The key step in accessing the title species (5), the first nonbenzenoid diisocyanobiaryl, involved an unexpected homocoupling of a 6-bromoazulene derivative. The reversible 2e(-) reduction of 5 was addressed electrochemically and computationally. The shifts in energies of the S(0)→S(1) and S(0)→S(2) transitions for a series of related 6,6'-biazulenyl derivatives correlate with the e(-)-donating/-withdrawing strength of their 2,2'-substituents but follow opposite trends. Species 5 adsorbs end-on (η(1)) to the Au(111) surface via one of its -NC groups to form a 2-nm-thick film. In addition, bimetallic coordination of 5's -NC termini can be readily achieved.     

Kinetics of Oxidation of L‐Cysteine by trans‐ and cis‐CoIII and FeIII Complexes based on α‐ and γ‐Diimine Schiff Base Ligands

Kinetics of oxidation of L ‐cysteine by Co^III and Fe^III complexes based on α‐ and γ‐diimine Schiff base ligands were studied in aqueous solution. Pairs of trans and cis isomers of the metal complexes were used in the studies. Kinetic measurements were performed at 25 °C and constant pH and ionic strength under pseudo‐first order condition, in which the concentration of cysteine was around two orders of magnitude greater than that of the metal complex. The observed rate constant was obtained by following the change in absorbance of the reaction mixture with time at a predetermined wavelength. The overall rate constant and order of the reaction with respect to cysteine and metal complex were determined. For both metal ions studied, the oxidation rate constant for the trans isomer was higher than that for the cis isomer. This was attributed to the contribution of the steric factor and the trans effect. The effects of substituents and the nature of the metal ion on the reaction rate are discussed.     

Ribonucleotide and ribonucleoside determination by ambient pressure ion mobility spectrometry

Detection limits and reduced mobilities for 12 ribonucleotides and 4 ribonucleosides were measured by ambient pressure electrospray ionization-ion mobility spectrometry (ESI-IMS). With the instrument used in this study it was possible to separate some of these compounds within mixtures. Detection limits reported for ribonucleotides and ribonucleosides ranged from 15 to 300 pmol and the reduced mobilities ranged from 41 to 56 suggesting that ambient pressure ESI-IMS may be used for their rapid and sensitive separation and detection. This report demonstrates that it was possible to use ion mobility spectrometry (IMS) to obtain a spectrum for the separation of nucleotides and nucleosides in less than 1 min. The application holds great promise for nucleotide analysis in the area of separating DNA fragments in genome sequencing and also for forensics DNA typing examinations used for the identification of blood stains in crime scenes and paternity testing.     

Development and validation of a micellar high-performance liquid chromatographic method for determination of risedronate in raw material and in a pharmaceutical formulation: application to stability studies

A micellar HPLC method was developed for analysis of the antiosteoporosis drug risedronate. The analysis was carried out using a 250 x 4.6 mm id, 5 microm particle size C18 Waters Symmetry column. The mobile phase consisted of 0.02 M sodium dodecyl sulfate + 0.3% triethylamine + 10% n-propanol, prepared in 0.02 M orthophosphoric acid. The pH of the mobile phase was adjusted to pH 6.0, and it was pumped at a flow rate of 0.7 mL/min with UV detection at 262 nm. The method showed good linearity in the range of 2-80 microg/mL, with an LOD of 0.40 microg/mL (1.31 x 10(-6) M) and an LOQ of 1.21 microg/mL. The suggested method was successfully applied for the analysis of risedronate in raw material and a tablet formulation, with average recoveries of 99.91 +/- 1.30 and 101.52 +/- 0.30%, respectively. The stability-indicating capability of the proposed method was proved using forced degradation. By changing the pH of the mobile phase to 4.0, the oxidative degradation product could be separated from risedronate.     

A Validated LC Method for the Quantitation of Cefotaxime in pH-Sensitive Nanoparticles

A sensitive and rapid routine LC method was validated for measuring cefotaxime incorporated in three different pH-sensitive nanoparticles. The drug was chromatographed on a C18 reversed-phase column; the mobile phase used was 0.05 M aqueous ammonium acetate, acetonitrile and tetrahydrofuran (87:11:2, v/v) adjusted to pH 5.5 with acetic acid. The flow rate was 1 mL min^?1 and cefotaxime was quantified at 254 nm, with a sensitivity range of 0.005 AUFS. The validated method was specific, linear (R ² ≥ 0.999), precise and accurate in a concentration range of 0.2–50.0 μg mL^?1. The method was rapid, selective and suitable for evaluation of cefotaxime in pH-sensitive Eudragit nanoparticles.     

Experimental investigation of long-wavelength optical lattice vibrations in quaternary AlxInyGa1−x−yN alloys and comparison with results from the pseudo-unit cell model

Raman and Fourier transform infrared (FTIR) spectroscopies have been utilized to measure long-wavelength optical lattice vibrations of high-quality quaternary Al_xIn_yGa_1−x−yN thin films at room temperature. The Al_xIn_yGa_1−x−yN films were grown on c-plane (0 0 0 1) sapphire substrates with AlN as buffer layers using plasma assisted molecular beam epitaxy (PA-MBE) technique with aluminum (Al) mole fraction x ranging from 0.0 to 0.2 and constant indium (In) mole fraction y=0.1. Pseudo unit cell (PUC) model was applied to investigate the phonons frequency, mode number, static dielectric constant, and high frequency dielectric constant of the Al_xIn_yGa_1−x−yN mixed crystals. The theoretical results were compared with the experimental results obtained from the quaternary samples by using Raman and FTIR spectroscopies. The experimental results indicated that the Al_xIn_yGa_1−x−yN alloy had two-mode behavior, which includes A₁(LO), E₁(TO), and E₂(H). Thus, these results are in agreement with the theoretical results of PUC model, which also revealed a two-mode behavior for the quaternary nitride. We also obtained new values of E₁(TO) and E₂(H) for the quaternary nitride samples that have not yet been reported in the literature.     

Structural,optical and electrical properties of undoped and Si-doped AlxGa1−xN thin films on Si (1 1 1) substrate grown by PA-MBE

We have studied the structural properties of undoped and Si-doped Al_xGa_1?xN/GaN/AlN on Si (1 1 1) substrate prepared by plasma-assisted molecular beam epitaxy (PA-MBE) using high-resolution X-ray diffraction (HR-XRD) and atomic force microscopy (AFM). In comparison with undoped AlGaN, the roughness and dislocation density on the surface of the AlGaN layer decrease with Si doping. Full width half maximum (FWHM) of the undoped and Si-doped samples were equal to 0.69° and 0.52°, respectively. This indicates that the Si doping improves the crystalline quality of the Al_xGa_1?xN layer compared with the undoped one. Raman scattering measurement reveals that the optical phonon modes of A₁(LO) and E₂(H) of the AlGaN show a one-mode and two-modes behavior, respectively. The Fourier-transform infrared reflectance (FTIR) investigation confirms the one-mode (two-mode) behavior of the LO (TO) phonon in our samples. This is in good agreement with Raman measurement. Finally, the barrier height (Φ_B) of undoped and Si-doped Al_xGa_1?xN samples was found to be 0.86 and 0.74 eV, respectively.     

Electrochemical behavior of anthraquinone in aqueous solution in presence of a non-ionic surfactant

Cyclic voltammetric behavior of anthraquinone in aqueous medium has been studied in presence of a non-ionic surfactant, Triton X-100 (TX-100) using sodium salt of anthraquinone-2-sulphonic acid (AQS) as the electro-active species. When cathodic potential is applied, the anthraquinone (AQ) group of AQS is reduced to its dianion. In the reverse scan, the oxidation of AQ²⁻ gives AQ. The electrochemical behavior shows a profound influence from the dissolved state of TX-100 in aqueous media. Spectrophotometric results indicate interaction between AQ and TX-100. A CEC (chemical–electrochemical–chemical) mechanism with the electrochemical reaction coupled with preceding interaction of AQS with TX-100 and following protonation reaction of reduced AQ has been proposed.     

Synthesis and solution properties of a pH‐responsive cyclopolymer of zwitterionic ethyl 3‐(N,N‐diallylammonio)propanephosphonate

The zwitterionic monomer, ethyl 3‐(N,N‐diallylammonio)propanephosphonate, was cyclopolymerized in aqueous solutions using t‐butylhydroperoxide or ammonium persulfate as initiators to afford a polyphosphonobetaine (PPB). The protonation of P(?O)OEtO^– and deprotonation of ? NH⁺ groups in PPB by HCl and NaOH, gave the corresponding cationic polyphosphononic acid (CPP) and anionic polyphosphonate (APP). The presence of two pH‐responsive functionalities in APP has led to establish the equilibria: APP ? PPB ? CPP, the position of which very much dictates the viscosity behavior of its aqueous solution. The PPB demonstrated “antipolyelectrolyte” viscosity behavior; however, in contrast to many polycarbo‐ and polysulfo‐betaines, it was found to be soluble in salt‐free water as well as in salt‐added solutions. Basicity constant (K₁) of the amine group in APP, as determined by potentiometric technique, were found to be “apparent,” and as such followed the modified Henderson‐Hasselbalch equation. The study demonstrated a correlation between the basicity constants and viscosity values. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010