Multivariate approach for the enantioselective analysis in MEKC‐MS: II. Optimization of 1,1′‐binaphthyl‐2,2′‐diamine in positive ion mode

Enantiomeric separation and detection of 1,1′‐binaphthyl‐2,2′‐diamine (BNA) has been successfully optimized by MEKC‐ESI‐MS using a polymeric surfactant polysodium N‐undecenoxycarbonyl‐L‐leucinate (poly‐L‐SUCL) as a pseudostationary phase. In the first step, MEKC conditions were optimized by a five‐factor three‐level central composite design (CCD) of experiment. All five MEKC factors (buffer pH, percentage of ACN in the running buffer, concentration of surfactant, concentration of ammonium acetate (NH₄OAc), and voltage) were found significant to the responses (measured as the chiral resolution and analysis time). The interactions between MEKC factors were further evaluated using a quadratic model equation which allowed the generation of 3‐D response surface image to reach the optimum conditions. To obtain the best S/N, sheath liquid composition and spray chamber parameters were successfully optimized using the same strategy. Baseline enantiomeric resolution in less than 20 min and optimum MS signal of BNA enantiomers (S/N = 45 at 0.4 mg/mL) were ultimately achieved at the optimized conditions. The adequacy of the model was validated by experimental runs at the optimal predicted conditions. The predicted results were found to be in good agreement with the experimental data.     

A practical and versatile approach toward a one-pot synthesis of 2,3-disubstituted 4(3H)-quinazolinones

Abstract  

An effective one-pot three-component route to 4(3H)-quinazolinones from commercially available starting materials is reported. Thus, isatoic anhydride reacted with ammonium acetate or primary amines and aldehydes in the presence of iodine to produce the corresponding quinazolinone derivatives in moderate to good yields.     

Separation of monomethyl-benz[a]anthracene isomers using cyclodextrin-modified electrokinetic chromatography

Cyclodextrin-modified electrokinetic chromatography (CD-EKC) was investigated for the separation of 12 monomethylbenz[a]anthracene (MBA) isomers. Combined use of a polymeric surfactant, poly(sodium 10-undecenyl sulfate) (poly-SUS), with various types of neutral cyclodextrins (CDs) [beta-CD, gamma-CD, dimethyl-beta-CD (DM-beta-CD), trimethyl-beta-CD (TM-beta-CD) and hydroxypropyl-beta-CD (HP-beta-CD)] were successful in CD-EKC separation of the MBA isomers. Baseline resolution of 10 of the 12 isomers, except for 9-MBA and 2-MBA, was achieved with gamma-CD at pH 9.75. The beta-CD, gamma-CD, and beta-CD derivatives (DM-beta-CD, TM-beta-CD, HP-beta-CD) were found to have different resolution and selectivity. Additionally, the tR/t0 values of isomers were found to be dependent on the type and concentration of the CD additives. In general, tR/t0 values of MBA isomers decrease with an increase in the concentration of beta-CD derivatives, whereas the reversed was true when the concentrations of native beta-CD and gamma-CD were varied. The combination of 5 mM gamma-CD, 0.5% (w/v) poly-SUS, 35% (v/v) acetonitrile at a pH of 9.75 provided the best selectivity and resolution of the MBA isomers with a separation time of 110 min. However, the use of 30 mM DM-beta-CD under similar EKC conditions resulted in much faster separation (ca. 16 min) of 10 MBA isomers.     

Separation of natural pyrethrum extracts using micellar electrokinetic chromatography

The separation of the six pyrethrin esters in a technical pyrethrum extract (Riedel-de-Ha?n, Cresent Chemical Co. Inc. Hauppauge, NY, USA) by micellar electrokinetic chromatography (MEKC) using both sodium dodecyl sulfate (SDS) and a polymerized surfactant as pseudo-stationary phases has been investigated and optimized. Parameters such as pH, SDS and polymerized sodium N-undecyl sulfate (poly-SUS) concentration, type and concentration of background electrolyte and organic modifier, as well as the acetonitrile/water ratio in the sample were studied to optimize the resolution, efficiency, and analysis time. An optimized separation of the six pyrethrin esters was achieved in 25 min with 25 mM Tris, buffered at pH 9, containing 30 mM SDS, 25% (v/v) acetonitrile, and an equal volume ratio of acetonitrile/water sample matrix at a voltage of 25 kV. The use of 0.5% (w/v) poly-SUS enhanced resolution of the pyrethrin esters and shortened the total analysis time from 25 to 20 min, compared to the SDS mediated separation. The optimized MEKC results are compared to the HPLC separation of these esters and show an improvement in efficiency and total analysis time.     

Sorption of hafnium on hydrous titanium oxide using radiotracer technique

The sorption of hafnium on hydrous titanium oxide (TiO₂·1.94 H₂O) has been studied in detail. Maximum sorption of hafnium can be achieved from a pH 7 buffer solution containing boric acid and sodium hydroxide using 50 mg of the oxide after 30 minutes shaking. The value ofk _d, the rate constant of intraparticle transport for hafnium sorption, from 0.01M hydrochloric and perchloric acid and pH 7 buffer solutions has been found to be 17 mmole·g^–1·min^–2. The kinetics of hafnium sorption follows Lagergren equation in 0.01M HCl solution only. The values of the overall rate constantK=6.33·10^–2 min^–1 and of the rate constant for sorptionk ₁=6.32·10^–2 min^–1 and desorptionk ₂=2.28·10^–5 min^–1 have been evaluated using linear regression analysis. The value of correlation factor() is 0.9824. The influence of hafnium concentration on its sorption has been examined from 4.55·10^–5 to 9.01·10^–4 M from pH 7 buffer solution. The sorption data followed only the Langmuir sorption isotherm. The saturation capacity of 9.52 mmole·g^–1 and of a constant related to sorption energy have been estimated to be 2917 dm³·mole^–1. Among all the additional anions and cations tested only citrate ions reduce the sorption significantly. Under optimal experimental conditions selected for hafnium sorption, As(III), Sn(V), Co(II), Se(IV) and Eu(III) have shown higher sorption whereas Mn(II), Ag(I) and Sc(III) are sorbed to a lesser extent. It can be concluded that a titanium oxide bed can be used for the preconcentration and removal of hafnium and other metal ions showing higher sorption from their very dilute solutions. The oxide can also be employed for the decontamination of radioactive liquid waste and for pollution abatement studies.     

Polymeric alkenoxy amino acid surfactants: II. Chiral separations of beta-blockers with multiple stereogenic centers

Two amino acid-based (leucine and isoleucine) alkenoxy micelle polymers were employed in this study for the separation of multichiral center-bearing beta-blockers, nadolol and labetalol. These polymers include polysodium N-undecenoxy carbonyl-L-leucinate (poly-L-SUCL) and polysodium N-undecenoxy carbonyl-L-isoleucinate (poly-L-SUCIL). Detailed synthesis and characterization were reported in our previous paper [26]. It was found that poly-L-SUCIL gives better chiral separation than poly-L-SUCL for both nadolol and labetalol isomers. The use of 50-100 mM poly-L-SUCIL as a single chiral selector provided separation of four and three isomers of labetalol and nadolol, respectively. Further optimization in separation of both enantiomeric pairs of nadolol and labetalol was achieved by evaluation of type and concentration of organic solvents, capillary temperature as well type and concentration of cyclodextrins. A synergistic approach, using a combination of poly-L-SUCIL and sulfated beta-CD (S-beta-CD) was evaluated and it showed dramatic separation for enantiomeric pairs of nadolol. On the other hand for labetalol enantiomers, separation was slightly decreased or remain unaffected using the dual chiral selector system. Finally, simultaneous separation of both nadolol and labetalol enantiomers was achieved in a single run using 25 mM poly-L-SUCIL and 5% w/v of S-beta-CD in less then 35 min highlighting the importance of high-throughput chiral analysis.     

The Effect of Morphological and Topological Characteristics on Effective Diffusivity and Permeability of Dual-Structural-Scale Synthetic Porous Medium

Transport in Porous Media - Image-based simulations at pore scale provide direct insight into the impact of the microstructure on flow and transport processes in porous media. Diffusion is an...     

Electrochemical identification of artificial oligonucleotides related to bovine species. Potential for identification of species based on mismatches in the mitochondrial cytochrome C1 oxidase gene

Our studies show that electrochemical impedance spectroscopy (EIS) and scanning electrochemical microscopy (SECM) of films of ds-DNA on gold allow us to distinguish between mitochondrial DNA fragments of the cytochrome c(1) oxidase (mt-Cox1) of three related species of the subfamily 'Bovinae' (Bos taurus, Bison bison, and Bison bonasus). In EIS, a perfectly matched DNA gives rise to a considerably larger charge transfer resistance R(ct) compared to mismatched pairings. Differences in charge transfer resistance, ΔR(ct), before and after the addition of Zn(2+) ions provide an additional tool for identification. In addition, all ds-DNA films were studied by SECM and their kinetic parameters were determined. Perfectly matched ds-DNAs are readily distinguished from mismatched duplexes by their lower rate constants. Our system can be used multiple times by dehybridization and rehybridization of capture strands up to the 250 pmole level.     

NBO,NMR Analysis,and Hybrid DFT Study of Structural and Configurational Properties of Di-tert-butyl-, bis(trimethysilyl)-, Bis(trimethgermyl)-, and Bis(trimethylstannyl)- cyclopenta-1,3-dienes

Abstract

The alkyl 1,2-shift in di-tert-butylcyclopenta-1,3-diene (1) and the metallotropic 1,2-shifts in bis(trimethylsilyl)cyclopenta-1,3-diene (2), bis(trimethylgermyl)cyclopenta-1,3-diene (3), and bis(trimethylstannyl)cyclopenta-1,3-diene (4) have been investigated by means of natural bond orbital (NBO), nuclear magnetic resonance (NMR) analysis, and hybrid density functional theory based methods. The B3LYP/DZVP results showed that the M(CH₃)₃ group [M = C (1), Si (2), Ge (3), and Sn (4)] migration barrier heights around cyclopentadienyl rings decrease from di-tert-butylcyclopenta-1,3-diene to its stannane derivative. Also, based on the results obtained, the stabilities of the 5,5-isomers in comparison to the 1,5- and 2,5-isomers increase from di-tert-butylcyclopenta-1,3-diene to its stannane derivative. The results suggest that in these compounds the metallotropic shifts are controlled by the stabilization energies associated with σ→π* electron delocalizations and the increase of the σ_C5-M→π*_C1-C2 electron delocalizations facilitates the M(CH₃)₃ group migrations around cyclopentadienyl rings. Based on the aromatic stabilization energy (ASE) values calculated, the aromaticity increases from the 5,5-isomers of di-tert-butylcyclopenta-1,3-diene to its stannane derivative but the variation of the nucleus-independent chemical shift, NICS(0) and NICS(1), values calculated are not in accordance with the ASE values calculated and the σ_C5-M→π*_C1-C2

electron delocalizations. The correlations between the sigmatropic shift barrier heights, σ→π* electron delocalizations, ASE, and NICS values were investigated.

GRAPHICAL ABSTRACT