Determination of aristolochic acid by capillary zone electrophoresis

A simple and rapid capillary zone electrophoresis (CZE) method for the determination of aristolochic acid (AA) in dietary supplements and selected herbs is described. A clear separation of AA from other sample constituents was achieved within 5 minutes without any sample clean up. A mixture of 20 mM-morpholinethanesulphonic acid+10 mM-BisTrisPropane+0.2% hydroxyethylcelullose in 10% methanol serves as a background electrolyte. The linearity, accuracy, intra-assay and detection limit of the developed method are 200–6000 ng/mL, 95–103%, 3.5%, and 50 ng/ml, respectively. Ease of use, sufficient sensitivity and low running cost are the most important attributes of the CZE method. The proposed CZE method was compared with HPLC.     

Structural and Chemical Analysis of Materials with High Spatial Resolution

 An understanding of the correlation between microstructures and properties of materials require the characterization of the material on many different length scales. Often the properties depend primarily on the atomistics of defects, such as dislocations and interfaces. The different techniques of transmission electron microscopy allow the characterization of the structure and of the chemical composition of materials with high spatial resolution to the atomic level: high resolution transmission electron microscopy allows the determination of the position of the columns of atoms (ions) with high accuracy. The accuracy which can be achieved in these measurements depends not only on the instrumentation but also on the quality of the transmitted specimen and on the scattering power of the atoms (ions) present in the analyzed column. The chemical composition can be revealed from investigations by analytical microscopy which includes energy dispersive X-ray spectroscopy, mainly quantitatively applied for heavy elements, and electron energy-loss spectroscopy. Furthermore, the energy-loss near-edge structure of EELS data results in information on the local band structure of unoccupied states of the excited atoms and, therefore, on bonding. A quantitative evaluation of convergent beam electron diffraction results in information on the electron charge density distribution of the bulk (defect-free) material. The different techniques are described and applied to different problems in materials science. It will be shown that nearly atomic resolution can be achieved in high resolution electron microscopy and in analytical electron microscopy. Recent developments in electron microscopy instrumentation will result in atomic resolution in the foreseeable future.     

Investigation of the tensile properties of “epoxy resin‐monomer” systems using cationic UV‐crosslinkable blends

The compatibility of cycloaliphatic and aromatic multifunctional epoxides with several epoxide resins allows the development of a wide range of cationic radiation‐curable formulations. The influence of different “epoxide resin‐monomer” systems UV‐cured in the presence of suitable cationic photoinitiators on the resulting physicochemical film properties was studied, and the results are stated. Copyright © 2004 John Wiley & Sons, Ltd.     

Novel Redox-Active Cyclophanes Based on 3,3'-Biindolizines: Synthesis and Chirality

The first compounds of a new series of redox-active cyclophanes were prepared by dehydrocyclization of bridged indolizines of type 1. The bridged dipyridino-compounds 2a and 2b obtained by reaction of 2 mol of lithiated alpha-picolines with dihalides were used as starting materials. Subsequent treatment of 2a,b with 2 mol of alpha-bromo ketones gave quaternary pyridinium halides. Ring closure in an alkaline medium (Chichibabin reaction) yielded the starting material for the synthesis of the macrocycles. Oxidative C-C coupling gave the diastereomeric cyclophanes of type 3. In all cases one pair of the enantiomers was obtained in excess. CV-investigations have shown that the main products are reversible redox systems. To clarify their conformations, compounds 3c, 3d/1, and3d/2 were subjected to X-ray analysis.     

Influence of chloride anions on the electrodeposition and electroactivity of the polymer matrix in polypyrrole,poly(<Emphasis Type="Italic">N</Emphasis>-methylpyrrole) and polypyrrole derivatives functionalized by titanocene centers,in dry non-aqueous solutions

We report electrochemical studies on the influence of a small concentration of chloride ions on the electroactivity of the polymer matrix of polypyrrole (PPy), poly(N-methylpyrrole) [p(N-MePy)] and a poly(titanocene-propyl-pyrrole) derivative, p(Tc3Py) [Tc(CH₂)₃NC₄H₄; Tc=CpCpTiCl₂; Cp=C₅H₅; Cp=C₅H₄] in acetonitrile (AN), tetrahydrofuran (THF) and N,N-dimethylformamide (DMF). The polymer films were obtained on Pt disc electrodes from AN solutions of the monomers containing 0.1 M tetrabutylammonium hexafluorophosphate (TBAPF₆) as the supporting electrolyte and then transferred to the corresponding monomer-free solution. Studies in Cl^–-containing solutions have shown that the p(Tc3Py) matrix is very sensitive to the presence of Cl^– ions in all the above solvents, namely that it was subjected to electrochemical degradation at potentials above 0.1 V vs. a Ag/0.01 M Ag⁺ in AN reference electrode. Degradation of the p(Tc3Py) matrix was also observed in chloride-free DMF+TBAPF₆ solutions. Addition of chloride ions to the AN solution containing pyrrole, N-methylpyrrole or Tc3Py inhibits the deposition of the polymer films. On the other hand, we have found that PPy and p(N-MePy) matrices after their deposition in chloride-free AN solutions show much more stable redox responses in contact with chloride and/or DMF solutions. Possible mechanisms of these effects are discussed.Abbreviations AN acetonitrile - Cp cyclopentadienyl - DMF N,N-dimethylformamide - N-MePy N-methylpyrrole - p(N-MePy) poly(N-methylpyrrole) - PPy polypyrrole - p(Tc3Py) poly[Tc(CH₂)₃NC₄H₄] - Py pyrrole - Tc titanocene=bis(cyclopentadienyl)titanium dichloride, Cp₂TiCl₂, or its radical CpCpTiCl₂ (Cp=C₅H₄) - Tc3Py titanocene-propyl-pyrrole, Tc(CH₂)₃NC₄H₄ - THF tetrahydrofuran Contribution to the 3rd Baltic Conference on Electrochemistry, Gdansk-Sobieszewo, Poland, 23–26 April 2003Dedicated to the memory of Harry B. Mark, Jr. (28 February 1934–3 March 2003)     

A Heuristic Decomposition Algorithm for Scheduling Problems on Mixed Graphs

We consider a scheduling problem where a set of n jobs has to be processed on a set of m machines and arbitrary precedence constraints between operations are given. Moreover, for any two operations i and j values a _ij >0 and a _ji >0 may be given where a _ij is the minimal difference between the starting times of operations i and j when operation i is processed first. Often, the objective is to minimize the makespan but we consider also arbitrary regular criteria. Even the special cases of the classical job shop problem J//C_max belong to the set of NP-hard problems. Therefore, approximation or heuristic algorithms are necessary to handle large-dimension problems. Based on the mixed graph model we give a heuristic decomposition algorithm for such a problem, i.e. the initial problem is partitioned into subproblems that can be solved exactly or approximately with a small error bound. These subproblems are obtained by a relaxation of a subset of the set of undirected edges of the mixed graph. The subproblems are successively solved and a proportion of the results obtained for one subproblem is kept for further subproblem definitions. Numerical results of the algorithm presented here are given.     

Yrast excitations in129Te

Using an 11.4MeV/u¹³⁶Xe beam of the UNILAC accelerator of GSI and a^natW target, A=184 isobars were produced and separated by using an on-line mass separator. A new isomeric state was found in¹⁸⁴Hf. This state decays with a half-life of 48(10) s and emits three -rays of 73, 482, and 555 keV as well as lower-lying cascade transitions. The hindrance of the 73 keV-E1 transition with K=8 is compared with those of other even-even hafnium isotopes. The half-life of¹⁸⁴Lu was estimated to be between 15 and 25s.     

Quantitative determination of chloride by means of flow injection analysis with spectrophotometric detection in the UV/VIS range

Chloride is determined indirectly by Spectrophotometric flow injection analysis. Two systems are compared, both based on the principle of ion exchange of easily detectable anions versus chloride from suitable mercury salts. The first method is based on the exchange of chloride with chloranilate which is detected at 332 nm or at 306 nm in neutral or in acidic medium respectively. In the second case, chloride reacts with Hg(SCN)₂. The liberated thiocyanate forms a strongly coloured complex with Fe(III) in acidic solution with an absorption maximum at 460 nm. Both methods have a detection limit of about 5 mol Cl^–/l (175 ng/ml). In the case of the thiocyanate method, the relative standard deviation is about 2% (7 measurements) in the range of 5 to 150 mol/l and decreases significantly to a value of approximately 0.2% at higher concentrations; for the chloranilate method it is 10% for lower and about 1% for higher concentrations respectively.