Solubility of Solid 2,3-Dimethylbutane and Cyclopentane in Liquid Argon and Nitrogen at the Standard Boiling Points of the Solvents

The solubilities of solid 2,3-dimethylbutane and cyclopentene in liquid argon at a temperature of 87.3 K and in liquid nitrogen at 77.4 K have been measured by the filtration method. The hydrocarbon contents in solutions were determined using gas chromatography. GC–MS was used to identify impurities in solutes. The experimental value of the mole fraction solubility of solid 2,3-dimethyl-butane in liquid argon at 87.3 K is (8.26 ± 1.60) × 10^–6 and (2.77 ± 0.94) × 10^–8 in liquid nitrogen at 77.4 K. The experimental value of the mole fraction solubility of solid cyclopentene in liquid argon at 87.3 K is (5.11 ± 0.44) × 10^–6 and (4.60 ± 0.76) × 10^–8 in liquid nitrogen at 77.4 K. The Preston–Prausnitz method was used for calculation of the solubilities of solid hydrocarbons in liquid argon in the temperature range 84.0–110.0 K and in liquid nitrogen from 64.0 to 90.0 K. The solvent–solute interaction parameters l ₁₂ were also calculated. At 90.0 K liquid argon is a better solvent for investigated solid hydrocarbons than is liquid nitrogen.     

Synthesis of 1,2-di-(4-pyridyl)ethylenediamine and related compounds

Hydrolysis of N,N'-diacyl-1,2-di(4-pyridyl)ethylenediamines 1 in aqueous sulfuric acid gave the corresponding imidazolines 3. 1,2-Di-(4-pyridyl)ethylenediamine 2 was prepared in 61 % yield by treating N,N'-di-t-butyl-oxycarbonyl-1,2-di(4-pyridyl)ethylenediamine 4 with trifluoroacetic acid or in 94% yield by the hydrolysis under basic conditions of N,N'-diphthaloylglycyl-1,2-di(4-pyridy)ethylenediamine 13.     

Synthesis and structure of highly substituted pyrazole ligands and their complexes with platinum(II) and palladium(II) metal ions

Reaction of 3-methoxycarbonyl-2-methyl- or 3-dimethoxyphosphoryl-2-methyl-substituted 4-oxo-4H-chromones 1 with N-methylhydrazine resulted in the formation of isomeric, highly substituted pyrazoles 4 (major products) and 5 (minor products). Intramolecular transesterification of 4 and 5 under basic conditions led, respectively, to tricyclic derivatives 7 and 8. The structures of pyrazoles 4a (dimethyl 2-methyl-4-oxo-4H-chromen-3-yl-phosphonate) and 4b (methyl 4-oxo-2-methyl-4H-chromene-3-carboxylate) were confirmed by X-ray crystallography. Pyrazoles 4a and 4b were used as ligands (L) in the formation of ML₂Cl₂ complexes with platinum(II) or palladium(II) metal ions (M). Potassium tetrachloroplatinate(II), used as the metal ion reagent, gave both trans-[Pt(4a)₂Cl₂] and cis-[Pt(4a)₂Cl₂], complexes with ligand 4a, and only cis-[Pt(4b)₂Cl₂] isomer with ligand 4b. Palladium complexes were obtained by the reaction of bis(benzonitrile)dichloropalladium(II) with the test ligands. trans-[Pd(4a)₂Cl₂] and trans-[Pd(4b)₂Cl₂] were the exclusive products of these reactions. The structures of all the complexes were confirmed by IR, ¹H NMR and FAB MS spectral analysis, elemental analysis and Kurnakov tests.     

Ultrathin functional films of titanium(IV) oxide

Chemistry and physics of thin semiconducting layers of various types are subjects of intense research. Especially when nanotechnology methods such as self-assembly are involved, amazing structural and/or functional properties may appear. Also modern physical methods using variously organized plasma arrangements are able to produce uniform structures with distinctive functionality. In this review, based virtually on our own work, discussions on the preparation, structure, morphology, and function of titanium(IV) oxide nanoscopic thin films are presented. It was shown that structurally and functionally similar titanium(IV) oxide films can be prepared via completely different preparation techniques. Function tests were arranged as “primary”, covering the assessment of the light induced charge separation efficiency, and “secondary”, based on photocatalytic surface oxidations.     

A Boat-Shaped Tetracationic Macrocycle with a Semiconducting Organic Framework

We report the synthesis of a tetracationic macrocycle which contains two N,N′-bis(methylene)naphthalenediimide units inserted in between the pyridinium rings of the bipyridinium units in cyclobis(paraquat-p-phenylene) (CBPQT⁴⁺ or “blue box”) and describe the investigation of its potential use in materials for organic electronics. The incorporation of the two naphthalenediimide (NDI) units into the constitution of CBPQT⁴⁺, not only changes the supramolecular properties of the tetracation in the solid state, but also has a profound influence on the electrochemical and electronic behavior of the resulting tetracationic macrocycle. In particular, the solid-state (super)structure, investigated by single-crystal X-ray diffraction, reveals the formation of a three-dimensional (3D) supramolecular framework with ca. 2.8 nm diameter one-dimensional (1D) hexagonal channels. Electrochemical studies on solid-state thin films of the macrocycle show that they exhibit semiconducting properties with a redox-conductivity of up to 7.6×10⁻⁴ S m⁻¹. Moreover, EPR and ENDOR spectroscopies show that charge is equally shared between the NDIs within the one-electron reduced state of the NDI-based macrocycle on the time scale of these techniques.     

The use of DSC and FT-IR spectroscopy for evaluation of oxidative stability of interesterified fats

The aim of this paper was to assess the oxidative stability of structured lipids synthesized by enzymatic interesterification of a blend of lard and rapeseed oil with concentrates of n ? 3 fatty acids. Differential scanning calorimetry was used to evaluate the oxidation induction time of interesterified fats as a parameter assessing resistance of tested fats to their thermal-oxidative decomposition. Moreover, the IR spectra registered in the classic spectral range (4000–400 cm^?1) were used to differentiate the samples of interesterified fats. The results show that the interesterification process decreased the induction time. Increased content polar fraction in the interesterified fatty product can reduce its resistance to oxidation. FT-IR data of selected spectral ranges correlate with the value of induction time at a statistically significant level. This is a proof that chemical changes occurring during different treatments of the starting mixture can be monitored by FT-IR spectroscopy. Moreover, obtained correlations can be used for the evaluation of an induction value of an unknown oil sample.     

Fixed points of some nonlinear operators in spaces of multifunctions and the Ulam stability

We prove a fixed point theorem for nonlinear operators, acting on some function spaces (of set-valued maps), which satisfy suitable inclusions. We also show some applications of it in the Ulam type stability.