A selective sensor for nanolevel detection of lead (II) in hazardous wastes using ionic-liquid/Schiff base/MWCNTs/nanosilica as a highly sensitive composite

An effective potentiometric sensor had been fabricated for the rapid determination of Pb²⁺ based on carbon paste electrode consisting of room temperature ionic liquid 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM-PF₆), multiwalled carbon nanotubes (MWCNTs), nanosilica, synthesized Schiff base, as an ionophore, and graphite powder. The constructed nanocomposite electrode showed better sensitivity, selectivity, response time, response stability, and lifetime in comparison with typical Pb²⁺ carbon paste electrode for the successfully determination of Pb²⁺ ions in water and in waste water samples. The best response for nanocomposite electrode was obtained with electrode composition of 18% ionophore, 20% BMIM-PF₆, 49% graphite powder, 10% MWCNT, and 3% nanosilica. The new electrode exhibited a Nernstian response (29.76?±?0.10 mV decade^?1) toward Pb²⁺ ions in the range of 5?×?10^?9?C1.0?×?10^?1 mol L^?1 with a detection limit of 2.51?×?10^?9 mol L^?1. The potentiometric response of prepared sensor is independent of the pH of test solution in the pH range of 4.5?C8.0. It has quick response with response time of about 6 s. The proposed electrode show fairly good selectivity over some alkali, alkaline earth, transition, and heavy metal ions.     

Spectrophotometric determination of the formation constants of some transition metal cations with a new synthetic Schiff base in dichloromethane and chloroform using rank annihilation factor analysis

The complex formation between a new synthesized Schiff base and the cations Ni²⁺, Co²⁺, Cu²⁺, Zn²⁺ in dichloromethane (DCM) and chloroform solutions was investigated spectrophotometrically using rank annihilation factor analysis (RAFA). The results of mole ratio plots and continuous variation data show the stoichiometry of complexation were found to be 1:1, and 2:1 metal ion to ligand. The stoichiometry was obtained as 1:1 metal ion to ligand ratio for Co²⁺, Ni²⁺ and Zn²⁺ in chloroform and 2:1 for Cu²⁺. In DCM the stoichiometry was obtained as 1:1 for Co²⁺ and 2:1 for Ni²⁺ and Zn²⁺ and a consecutive 2:1 metal ion to ligand ratio was obtained for Cu²⁺. Formation constants of these complexes were estimated by application of RAFA on spectrophotometric data. In this process the contribution of ligand was removed from the absorbance data matrix when the complex stability constant acts as an optimizing object and simply combined with the pure spectrum of the ligand, the rank of the original data matrix can be reduced by one by annihilating the information of the ligand from the original data matrix.     

Construction of Modified Carbon Paste Electrode for Highly Sensitive Simultaneous Electrochemical Determination of Trace Amounts of Copper (II) and Cadmium (II)

A chemically modified electrode was constructed for rapid, simple, accurate, selective and highly sensitive simultaneous determination of Cu(II) and Cd(II) using square wave anodic stripping voltammetry. The electrode was prepared by incorporation of SiO₂ nanoparticles, coated with a newly synthesized Schiff base, in carbon paste electrode. The limit of detection was found to be 0.28 ng mL^?1 and 0.54 ng mL^?1 for Cu(II) and Cd(II), respectively. The proposed chemically modified electrode was used for the determination of copper and cadmium in several foodstuffs and water samples.     

Spectrophotometric determination of fluoxetine by batch and flow injection methods

A rapid, simple, and accurate spectrophotometric method is presented for the determination of fluoxetine by batch and flow injection analysis methods. The method is based on fluoxetine competitive complexation reaction with phenolphthalein-beta-cyclodextrin (PHP-beta-CD) inclusion complex. The increase in the absorbance of the solution at 554 nm by the addition of fluoxetine was measured. The formation constant for fluoxetin-beta-CD was calculated by non-linear least squares fitting. Fluoxetine can be determined in the range 7.0 x 10(-6)-2.4 x 10(-4) mol l(-1) and 5.0 x 10(-5)-1.0 x 10(-2) mol l(-1) by batch and flow methods, respectively. The limit of detection and limit of quantification were respectively 4.13 x 10(-6) mol l(-1) and 1.38 x 10(-5) mol l(-1) for batch and 2.46 x 10(-5) mol l(-1) and 8.22 x 10(-5) mol l(-1) for flow method. The sampling rate in flow injection analysis method was 80+/-5 samples h(-1). The method was applied to the determination of fluoxetine in pharmaceutical formulations and after addition to human urine samples.     

N2O4 Chemisorbed onto n‐Propylsilica Kryptofix 21 and Kriptofix 22 as Two New Functional Polymers for the Fast Oxidation of Urazoles and 1,4‐Dihydropyridines

3‐Chloropropylsilica was reacted with Kriptofix 21 or 22 in the presence of triethylamine to form N‐propylsilica Kryptofix 21 and Kriptofix 22. Then N₂O₄ was added to each of these polymers to chemisorb onto cavity of aza‐crown ethers. These functionalized polymers were applied for the fast and simple oxidation of urazoles and 1,4‐dihydropyridines, respectively.     

Ag nanoparticles for determination of bisphenol A by resonance light-scattering technique

Resonance light-scattering (RLS) technique was developed for studying the interaction of silver nanoparticles (Ag NPs) with bisphenol A. A simple and environmentally friendly method was developed to synthesize Ag NPs using cinnamon extract. Synthesized nanoparticles were characterized using various measurement techniques. The synthesized Ag NPs were nearly spherical, with the sizes ranging from 30 to 60 nm. Spectral analysis indicated that the cinnamon extract acted as the reducing and capping agents on the surface of Ag NPs. RLS technique was used as the detection method. Light-scattering properties of the synthesized nanoparticles in the presence or absence of bisphenol A was selected as the detection signal. Under the optimal conditions, the linear dynamic range and RSD were found to be 0.01–10.0 mg L^?1 and 2.78% (n?=?3), respectively. A limit of detection of 0.005 mg L^?1 was obtained for the determination of bisphenol A. The obtained results showed successful application of the method for the analysis of bisphenol A in real samples.     

Electrochemical determination of levodopa in the presence of ascorbic acid by polyglycine/ZnO nanoparticles/multi-walled carbon nanotubes-modified carbon paste electrode

Ionics - This work report on electrodeposition of polyglycine microparticles onto zinc oxide (ZnO) nanoparticles/multi-walled carbon nanotube-modified carbon paste electrode surface in order to...     

Kinetic-spectrophotometric determination of trace amounts of As(III) based on its inhibitory effect on the redox reaction between bromate and hydrochloric acid

A simple, sensitive, rapid and reliable method has been developed for spectrophotometric determinations of As(III) in the presence of As(V) based on its inhibition effect on the redox reaction between bromate and hydrochloric acid. The decolorization of methyl orange by the reaction products was used to monitor the reaction spectrophotometrically at 525 nm. The method allows the determination of arsenic in the range of 6-1000 mug l(-1). The relative standard deviation for 10 determinations of 40 mug l(-1) of As(III) was 1.43% and the limit of detection, corresponding to a signal to noise ratio of three, was 3.4 mug l(-1). The proposed method was applied to the determination of As(III) in water samples with satisfactory results.     

Kinetic-spectrophotometric determination of selenium in natural water after preconcentration of elemental selenium on activated carbon

A simple, accurate, sensitive and selective method is described for rapid determination of ultra-trace quantities of selenium. Selenium (IV) was collected on activated carbon after reduction to elemental Se by l-ascorbic acid. The collected selenium was then determined based on its accelerating effect on the oxidation reaction of methyl orange with bromate in acidic media. Total amount of Se(IV) and Se(VI) were collected on AC after their reduction by hydrazine. Se(IV), Se(VI) and total selenium could be determined by the method. Selenium in the range 10-10 000 ng could be determined by the method. The method was used to the determination of Se(IV), Se(VI) and total selenium in natural water with satisfactory results.