Homeopathic ligand-free palladium as a catalyst in the heck reaction. A comparison with a palladacycle

[reaction: see text] Ligand-free Pd(OAc)(2) can be used as a catalyst in the Heck reaction of aryl bromides as long as the amount of catalyst is kept between 0.01 and 0.1 mol %. At higher concentrations palladium black forms and the reaction stops. The actual catalyst is monomeric. Palladacycles merely serve as a source of ligand-free palladium in Heck reactions of aryl bromides.     

Thermal and photochemical rearrangement of bicyclo[3.1.0]hex-3-en-2-one to the ketonic tautomer of phenol. Computational evidence for the formation of a diradical rather than a zwitterionic intermediate

The ground state (S(0)) and lowest-energy triplet state (T(1)) potential energy surfaces (PESs) concerning the thermal and photochemical rearrangement of bicyclo[3.1.0]hex-3-en-2-one (8) to the ketonic tautomer of phenol (11) have been extensively explored using ab initio CASSCF and CASPT2 calculations with several basis sets. State T(1) is predicted to be a triplet pipi lying 66.5 kcal/mol above the energy of the S(0) state. On the S(0) PES, the rearrangement of 8 to 11 is predicted to occur via a two-step mechanism where the internal cyclopropane C-C bond is broken first through a high energy transition structure (TS1-S(0)()), leading to a singlet intermediate (10-S(0)()) lying 25.0 kcal/mol above the ground state of 8. Subsequently, this intermediate undergoes a 1,2-hydrogen shift to yield 11 by surmounting an energy barrier of only 2.7 kcal/mol at 0 K. The rate-determining step of the global rearrangement is the opening of the three-membered ring in 8, which involves an energy barrier of 41.2 kcal/mol at 0 K. This high energy barrier is consistent with the fact that the thermal rearrangement of umbellulone to thymol is carried out by heating at 280 degrees C. Regarding the photochemical rearangement, our results suggest that the most efficient route from the T(1) state of 8 to ground state 11 is the essentially barrierless cleavage of the internal cyclopropane C-C bond followed by radiationless decay to the S(0) state PES via intersystem crossing (ISC) at a crossing point (S(0)()/T(1)()-1) located at almost the same geometry as TS1-S(0)(), leading to the formation of 10-S(0)() and the subsequent low-barrier 1,2-hydrogen shift. The computed small spin-orbit coupling between the T(1) and S(0) PESs at S(0)()/T(1)()-1 (1.2 cm(-)(1)) suggests that the ISC between these PESs is the rate-determining step of the photochemical rearrangement 8 --> 11. Finally, computational evidence indicates that singlet intermediate 10-S(0)() should not be drawn as a zwitterion, but rather as a diradical having a polarized C=O bond.     

Experimental evidence for multiple oxidation pathways in the (salen) Mn-catalyzed epoxidation of alkenes

The substrate electronic effects on the selectivity in the catalytic epoxidation of para-substituted cis stilbenes 2a-i were investigated by using (R,R)-[N,N'-bis(3,5-di-tBu-salicylidene)-1,2-cyclohexanediamine]manganese(III) chloride 1 in benzene as the catalyst with iodosobenzene as the terminal oxidant. A Hammett study of the selectivity results reveals a stronger electrophilic character than previously assumed in the (salen)Mn-catalyzed reaction. In general, the best correlations with the experimental values were obtained by using the Hammett sigma + values, which gave rho = -1.37 for the rate of cis-epoxide formation and rho = -0.43 for the rate of the stepwise process leading to the corresponding trans product. The reaction involves two separate pathways as indicated also by the competitive breakdown of the intermediate on the path to trans epoxide for methoxy-substituted substrates. The asynchronicity in the concerted pathway leading to cis epoxide is apparent for 4-methoxy-4'-nitrostilbene, which yields cis epoxide with 75% ee entirely as a result of electronic effects.     

甲烷直接氧化制甲醇Ⅱ．催化膜反应器（CMR）

采用溶胶－凝胶（Ｓｏｌ－Ｇｅｌ）法制备了微孔结构均匀的“ＳｉＯ＿２／陶瓷”膜和“Ｍｏ－Ｃｏ－·Ｏ／ＳｉＯ＿２／陶瓷”催化功能膜，并用ＸＲＤ、ＳＥＭ和孔径测定等技术进行了表征。在常压、５００～７００℃的条件下，在催化膜反应器（ＣＭＲ）中考察了甲烷氧化制甲醇的反应。在相似的反应条件下（转化率为１．０％），用ＣＭＲ（甲醇选择性１１．２％）可获得较固定床反应器（甲醇选择性４．５％）高得多的甲醇选择性。     

Distinct chemoselectivity in the reaction of N-(thio)phosphoryl imines with diethylzinc

This report describes the reaction of N-(thio)phosphoryl imines with diethylzinc under different conditions. An interesting and distinct chemoselectivity between hydrogen-addition and ethyl-addition to imine double bond is disclosed: in weakly polar solvent, e.g. toluene, N-(thio)phosphoryl imines were exclusively reduced in excellent yields via a β-H transfer from diethylzinc to imine double bond; in polar solvents like THF, the reduction product was competitively formed as a major product together with the minor product resulting from ethyl-addition to imine double bond; in sharp contrast, in the presence of strong coordinative additive N,N,N′,N′-tetramethylethylenediamine (TMEDA), the ethylation product was formed exclusively from the reaction of N-(thio)phosphoryl imine with diethylzinc. These results are discussed and explained in terms of the coordination interactions between the imine, solvent, and additive with diethylzinc.     

Effects of various donor: acceptor blend ratios on photophysical properties in non-fullerene organic bulk heterojunctions

In this work, the donor:acceptor ratio effected photophysical properties of non-fullerene organic solar cells are comparatively investigated. Effective transportation of the photo-generated charge carriers can be obtained with the PDBD-T:ITIC ratio variation. There is no significant energy loss variation exists in the process of changing the D:A ratio.     

Determination of aflatoxins in peanuts by matrix solid-phase dispersion and liquid chromatography

A new method based on matrix solid-phase dispersion (MSPD) extraction was studied to determine aflatoxin B1, B2, G1 and G2 from peanuts. Optimization of different parameters, such as type of solid supports for matrix dispersion and elution solvents were carried out. The method used 2 g of peanut sample, 2 g of C18 bonded silica as MSPD sorbent and acetonitrile as eluting solvent. Recoveries of each aflatoxin spiked to peanut samples at 2.5 ng/g (5 ng/g for aflatoxin G2) level were between 78 and 86% with relative standard deviations ranging from 4 to 7%. The limits of quantification ranged from 0.125 to 2.5 ng/g for the four studied aflatoxins using liquid chromatography (LC) with fluorescence detection. In addition, LC coupled to mass spectrometry with an electrospray interface was used for confirmation of aflatoxins present in real samples. Eleven peanut samples from different countries were analyzed by the proposed method and by using an enzyme-linked immunosorbent assay (ELISA). ELISA test is a good screening method for investigation of these mycotoxins in peanut samples.     

Coordination properties of a diarylaza crown ether appended with a luminescent [Ru(bipy)3]2+ unit

The [Ru(bipy)(2)(1)](PF(6))(2) (bipy refers to 2,2'-bipyridine) complex, comprising a ruthenium(II) tris(2,2'-bipyridine) luminophore covalently linked to a di[(o-triethyleneglycoxy)phenyl]amine crown ether 1, has been synthesized and fully characterized. The photophysical properties of this metal complex have been examined in solution at ambient temperature. Luminescence from the metal complex is enhanced significantly in the presence of various adventitious cations, including protons. In particular, Li(+) cations bind to the crown ether, as evidenced by (1)H NMR and luminescence spectroscopy. Cation binding serves to decrease the rate of reductive quenching of the triplet state of the metal complex, thereby increasing the extent of luminescence. The solution-phase conformation of [Ru(bipy)(2)(1)](PF(6))(2), with and without encapsulated Li(+), has been examined by 2-D NMR and by molecular dynamics simulations.     

人体内酮体检测技术的研究进展

论述了检测人体内酮体浓度的重要意义和酮体的代谢过程，对各种检测技术的发展过程、检测原理、操作步骤及各自的优缺点进行了比较分析，着重探讨了对血液中β-羟丁酸的检测，并对各种技术的发展方向作了进一步的展望。     

Study of amorphous Ni-La-B/g-Al2O3 catalysts for the production of hydrogen peroxide from carbon monoxide, water and oxygen

Summary Novel amorphous Ni-La-B/-Al₂O₃ catalysts have been developed for the production of hydrogen peroxide from carbon monoxide, water and oxygen. The experimental investigation confirmed that the catalyst dried at 120ºC in air shows the best initial activity. The deactivation of amorphous Ni-La-B/-Al₂O₃ catalysts was also studied.