2′,3′-乙氧甲撑基腺苷5′-硫代磷酰氨基酸酯的合成和谱学分析

核苷磷酰氨基酸酯化合物是一类倍受重视的药物 ,特别是它可作为寡聚核苷酸的类似物用于反义药物 [1] .HIV逆转录酶是治疗艾滋病的有效靶点 ,目前普遍使用的抗 HIV核苷类似物中 ,2′,3′-双脱氧核苷 (dd Ns)具有良好的疗效 [2 ] .苯氧基取代的核苷 -磷酰氨基酸酯是 HIV逆转录酶的有效抑制剂[3 ] ,其药物毒性比 dd Ns低 ,但容易在体内被核酸酶水解 .由于硫代磷酸对核酸酶具有抵抗性 ,它可以抑制核酸酶对它的水解 [4 ] ,因此我们设计合成了核苷 5′-硫代磷酰氨基酸酯化合物 ,希望开发出一种全新的 HIV逆转录酶抑制剂 .由于分子中引入氨基…     

含有机配体的活性双过氧钒配合物与组氨酸的相互作用研究

在合成和表征了4种具有较强生物活性双过氧钒配合物K_3[VO(O_2)_2(ox)]· 2H_2O，Na[VO(O_2)_2(bipy)]·5H_2O，K[VO(O_2)_2(phen)]·3H_2O和K_2[VO (O_2)_2(pic)]·2H_2O[分别缩写为pV(ox)，pV(bipy)，pV(phen)和pV(pic)，其中 ox为草酸根，bipy为2,2'-联吡啶，phen为邻菲咯啉，pic为2-羧酸吡啶负离子]的 基础上，利用多种NMR技术和电喷雾质谱（ESI-MS）研究了这4种含有机配体双过氧 钒酸合物与组氨酸（His）在溶液中的相互作用以及反应物浓度、时间、pH等对相 互作用体系的影响。~(51)V NMR跟踪监测的结果表明：双过氧钒配合物pV(ox)和 pV(pic)与His在中性水溶液中存在强配位相互作用，而pV(bipy)和pV(phen)与His 在中性水溶液中无明显作用。我们还利用谱学方法确定了pV(ox)和His相互作用后 所生成产物是pV(ox)分别与His在中性水溶液中无明显作用。我们还利用谱学方法 确定了pV(ox)和His相互作用后所生成产物是pV(ox)分别与His咪唑基上的3-N和1- N配位的一对异构体。     

对二甲胺基苯甲醛缩2,4-二硝基苯腙的合成和结构

利用对二甲氨基苯甲醛和2,4-二硝基苯肼的缩合反应合成了对二甲氨基苯甲醛缩2,4-二硝基苯腙,利用红外、紫外光谱和元素分析进行了结构表征.利用X射线衍射分析方法测定了晶体结构,结果表明化合物中分子为平面型结构,偏离平面的最大的N(2) 原子距平面0.00351(2) nm;分子内和分子间的氢键使晶胞内的分子沿c轴成锯齿型链,分子间有芳环堆积作用存在.     

SNAP-tag蛋白标签技术与荧光分析法在蛋白原位分析中的联合应用

为将生物体内微观的蛋白行为可视化并以宏观信号呈现出来对蛋白进行实时、动态分析，借助SNAP-tag蛋白标签技术与有机小分子荧光染料，构建了一系列用于活细胞内实时监测目标蛋白的免洗荧光探针。标签蛋白SNAP-tag能够特异性识别探针中的苄基鸟嘌呤，从而使目标蛋白共价连接上荧光团（萘酰亚胺），携带上荧光信使。此外，由于萘酰亚胺从水环境中被牵引至SNAP-tag蛋白的疏水空腔，其荧光信号呈现出2~13倍的增强。通过SNAP-tag标签蛋白与目标蛋白的融合，该荧光探针实现了对活细胞内线粒体蛋白CoX8A及核内蛋白H2B特异性识别，在免洗条件下完成了对目标蛋白的实时追踪及原位分析。     

CrOx/ SBA-15介孔催化剂上丙烷在二氧化碳气氛中脱氢反应的研究

The structure and catalytic properties based on Chromium Oxide supported on mesoporous SBA-15 for oxidative dehydrogenation of propane by CO₂ have been studied by using X-ray diffraction (XRD), ultraviolet-visible diffuse reflectance spectra (UV-Vis DRS), electron spin resonance (ESR), X-ray photoelectron spectroscopy (XPS) and propane pulsing experiments in the absence of gas-phase O₂. It has been shown that propane conversion and propene yield increase with Cr loadings. The propane conversion and propene yield on CrO_x(Cr: 10wt%)/SBA-15 catalyst for oxidative dehydrogenation of propane by CO₂ at 550 ℃ reach 24.8% and 21.8%, respectively .The results of ESR, UV-Vis DRS and propane pulsing experiments indicate that Cr^Ⅲ in the CrO_x/ SBA-15 catalyst is the main active species in oxidative dehydrogenation of propane by CO₂ and Cr^Ⅵ, Cr^Ⅴ is inactive in dehydrogenation.     

1-烷（苯）氧基-3-（3，4-亚甲基二氧）苯基-2-丙醇的合成与生物活性研究

黄樟素氧化物与烷氧基钠和苯氧基钠反应，区域选择性地开环加成，生成1-烷 （苯）氧基-3-（3，4-亚甲基二氧）苯基-2-丙醇。该系列化合物具有诱导细胞凋 亡与分化的生物活性。     

Synthesis and Electrospray Ionization Mass Spectra of N-（1,3, 2-Dioxaphosphorinan-2-ylmethyl）thiophosphoramidates

N-（1,3,2-Dioxaphosphorinan-2-ylmethyl）thiophosphoramidates were synthesized and determined by NMR spectra and positive ion electrospray ionization mass spectrometry （ESI-MS） in conjunction with tandem mass spectrometry （MS/MS）. The fragmentation pathways were investigated. The results show that these characteristic ions in ESI mass spectra are useful in the structural determination of N-（1,3,2-dioxaphosphorinan-2-ylmethyl）- thiophosphoramidates.     

SrTi0.9M0.1O3-δ钙钛矿型氧化物催化剂甲烷氧化偶联反应性能的研究

The structure and catalytic properties of SrTi_0.9M_0.1O_3-δ (M=Mg，Al， Zr) perovskite-type catalysts for ox-idative coupling of methane (OCM) have been studied by using X-ray diffraction (XRD)，X-ray photoelectron spectroscopy (XPS) and temperature-programmed desorption of oxygen(O₂-TPD) methods. It has been shown that doping the cations of lower valence (e.g. Mg²⁺， Al³⁺) to the B site of SrTi_0.9M_0.1O_3-δ perovskite-type catalysts results in the higher content of adsorbed oxygen species on the surface of catalysts and thus higher C₂-selectivity for OCM reaction. It is suggested that the oxygen vacancies of SrTi_0.9M_0.1O_3-δ (M=Mg， Al， Zr) perovskite-type catalysts are the sites responsible for oxygen activation， and the adsorbed oxygen species on the surface of SrTi_0.9M_0.1O_3-δ catalysts are the main active species for OCM reaction.     

Enantioselective Addition of Phenylacetylene to Aldehydes Catalyzed by Polymer-Supported Sulfonamide

Enantioselective formation of C-C bonds is an area of intense research. Among them, the asymmetric addition of alkynyl reagents to aldehydes is very useful for the synthesis of chiral secondary propargyl alcohols.[1] Recently, many significant homogeneous chiral ligands have been disclosed,[2,3] but very few efficient heterogeneous catalysts have been reported. Herein, we report our research results in the asymmetric addition of phenylacetylene to aldehydes catalyzed by polymer-supported chiral sulfonamide.     

Tailoring the optical property by a three-dimensional epitaxial heterostructure: a case of ZnO/SnO2

Epitaxial growth, as a best strategy to attain a heterostructure with a well-defined and clean interface, usually takes place on a planar substrate. In this paper, using a ZnO/SnO2 core-shell heterostructure as an example, we demonstrate the possibility of establishing a three-dimensional epitaxial interface between two materials with different crystal systems for the first time and show possible tailoring optical properties by building the heteroepitaxial crystal interface. The characterization results of element mapping, high-resolution transmission electron microscopy, and selected area electric diffraction reveal that the as-prepared ZnO/SnO2 heterostructure has a tetrapod-like ZnO core and a SnO2 shell with 15-30 nm, and their special epitaxial relation is (010)SnO2//(010)ZnO and [100]SnO2//[0001]ZnO. Such three-dimensional epitaxy between the ZnO core and SnO2 shell is quite different from the usual planar epitaxy or three-dimensional epitaxy between materials having the same crystal structure. A rational model of such complicated epitaxy has been proposed through investigating the certain structural comparability between the wurtzite ZnO and rutile SnO2 crystals. The as-prepared T-ZnO/SnO2 epitaxial heterostructure exhibits unique luminescence properties in contrast with individual tetrapod ZnO and SnO2 nanostructures, in which the epitaxial interface induces new luminescence properties. This result may inspire great interest in exploring other complicated epitaxy systems and their potential applications in laser, gas sensor, solar energy conversion, photo catalysis, and nanodevices in the future.