Prediction of chromatographic parameters for some anilines by molecular connectivity

Summary The possible relation existing between R_F values obtained by thin-layer chromatography for a group of anilines with connectivity indices proposed by Kier and Hall has been studied. Using multivariable regression the corresponding connectivity functions, selected for their respective correlation coefficients, standard deviations, Snedecor's F and Student's t were obtained. Regression analysis of the connectivity functions gives a correct prediction of the experimental elution sequence for this group of substances on silica gel stationary phases and various mobile phases of different polarity. The corresponding random and stability studies of the different prediction models selected were carried out, showing good stability and null randomness in all cases.     

In situ disorder-order transformation in synthetic gallosilicate zeolites with the NAT topology

Here, we report that synthetic gallosilicate molecular sieves with the NAT topology and Si/Ga ratios close to but slightly higher than 1.50 undergo an in situ transformation under their crystallization conditions. The materials have been studied ex situ by using powder X-ray diffraction, elemental and thermal analyses, and multinuclear MAS NMR. The transformation is characterized by a change in the distribution of Si and Ga of the NAT framework, from a quite (but not completely) disordered phase to a very highly (but not completely) ordered one, accompanied by a change from tetragonal to orthorhombic symmetry. During most of the solution-mediated transformation, no noticeable signs of fresh precipitation, phase segregation, or changes in the chemical composition are detected. Intermediate materials show variations in the degree of Si-Ga ordering and orthorhombic distortion and are not physical mixtures of the disordered and ordered phases. Ab initio calculations strongly suggest a preferential siting of Si in the tetrahedral sites involved in a smaller number of 4-rings in the NAT topology (i.e., the low multiplicity site). The cost of violations of Loewenstein's rule has also been calculated. For this topology and chemical composition the preferential siting and Loewenstein's rule drive together the system to the ordered configuration. A Monte Carlo sampling procedure affords a reasonable model for the initial, mainly disordered state, which fits well within the experimental disorder-order series.     

Studies on the copolymerization of unsaturated 1,3-dioxane derivatives—IV. Radical copolymerization of 2-furyl-5,5-dimethyl-1,3-dioxane with maleic anhydride

The copolymerization of 2-furyl-5,5-dimethyl-1,3-dioxane with maleic anhydride in the presence of a radical catalyst yields equimolar, alternating copolymers in which the furyl units have 2,5-linkage. It has been shown that 2-furyl-5,5-dimethyl-1,3-dioxane forms a charge transfer complex with maleic anhydride. The equilibrium constant for the complex was determined by NMR spectroscopy.     

An efficient reagent for the phosphorylation of deoxyribonucleosides, DNA oligonucleotides, and their thermolytic analogues

[reaction: see text] The phosphoramidite 11 was prepared in three steps from methyl 2-mercaptoacetate and demonstrated efficiency in the synthesis of conventional 5'-/3'-phosphate/thiophosphate monoester derivatives of 2'-deoxyribonucleosides and DNA oligonucleotides. Moreover, the use of 11 has enabled the preparation of the dinucleoside phosphorothioate analogue 26 in high yields (>95%) with minimal cleavage (<2%) of the thermolytic thiophosphate protecting group.     

Determination of total carbon and total organic carbon from volatile air pollutants. Part I

Summary A new method of collection of representative air samples for the determination of TC and TOC from volatile air pollutants has been developed. The organic substances undergo combustion and only the carbon dioxide produced is concentrated on molecular sieve 5 A at ambient temperature. The CO₂ is subsequently liberated by thermal desorption at ca. 380°C in a stream of purified gas. Atmospheric CO₂ must be removed first and this can be done (at the sample flow rate of 700 ml/min) by a layer of Ascarite heated at 90° C. Organic compounds passing through the layer are then combusted by a dynamic method utilizing Körbl catalyst and the CO₂ formed is concentrated on a molecular sieve 5 A, followed by thermal desorption and final determination. Organic acids are also retained by the first CO₂ absorber. A diffusion cell for preparation of the mixtures of purified air with vapours of organic compounds is described.

---

Zusammenfassung Eine neue Anreicherungsmethode zur Gewinnung representativer Luftproben zur Bestimmung des Gesamtkohlenstoffgehaltes und des Gehaltes an organischem Kohlenstoff (TOC) aus flüchtigen Luftverunreinigungen wurde entwickelt. Während der Probenahme werden die flüchtigen Verunreinigungen verbrannt und nur das entstandene Kohlendioxid bei Zimmertemperatur am Molekularsieb 5A angereichert. Anschließend wird CO₂ bei ca. 380° C im gereinigten Gasstrom thermisch desorbiert. Bei der TOC-Bestimmung muß atmosphärisches CO₂ vorangehend aus dem Luftstrom entfernt werden und wird an einer auf 90° C erwärmten Ascariteschicht gebunden. Die durchfließenden organischen Verbindungen werden dann im dynamischen System am Körblkatalysator oxydiert, das entstandene CO₂ am Molekularsieb 5A angereichert, thermisch desorbiert und einer Endbestimmung zugeführt. Organische Säuren werden gleichfalls durch den ersten CO₂-Absorber gebunden. Eine Diffusionszelle zur Herstellung von Gemischen gereinigter Luft mit Dämpfen organischer Verbindungen wurde beschrieben.

     

Analytical control of silica glass production. Voltammetric determination of titanium and iron in raw materials and silica glass samples

Adsorptive stripping voltammetric (AdSV) methods are presented for the determination of titanium and iron in quartz and silica glass samples obtained after pressure decomposition. Mandelic acid and catechol were used as complexing agents for titanium and iron, respectively. The method for titanium determination is based on the catalytic effect of chlorate ions. An insoluble residue remaining after decomposition of quartz and silica glass samples in HF+H2SO4 mixture was checked by energy-dispersive X-ray analyses. ET-AAS was applied as a reference method to AdSV measurements.     

Gamma radiation from the209Bi(3He, 3nγ)209at reaction

Gamma-radiation from the reactions of 28 MeV and 26 MeV³He-ions on the²⁰⁹Bi target has been studied by means of Ge(Li) detectors. Individual observed prompt -ray transitions have been assigned to the corresponding reactions. The results of previous studies of the²⁰⁹At nucleus have been verified and completed. Two new levels at energies of 640 keV and 1270·5 keV have been introduced. Additionally, 15 new transitions have been observed which could belong to²⁰⁹At. The²⁰⁹At level structure is discussed in terms of nuclear models.     

Mechanistic Study on the Oxidation of Promazine and Chlorpromazine by Hexaimidazolcobalt(III) in Acidic Aqueous Media

The kinetics of the oxidation of promazine and chlorpromazine by hexaimidazolcobalt(III) were studied in the presence of a large excess of cobalt(III) and H⁺ ions using u.v.–vis. spectroscopy ([Co^III] = (1–6) × 10⁻³ m, [ptz] = (2.5–10) × 10⁻⁵ m, [H⁺] = 0.05–0.8 m, I = 1.0 m (H⁺, Na⁺, Cl⁻), T = 333–353 K, l = 1 cm). In each case, the reversible reaction leads to formation of cobalt(II) species and a stable cationic radical. A linear dependence of the pseudo-first-order rate constant (k_obs) on [Co^III] with a non-zero intercept was established for both phenothiazine derivatives. A marked difference in the observed reaction rate for promazine and chlorpromazine is associated with the difference in its ability to undergo oxidation and is consistent with a trend in the redox potential changes for these reductants. The activation parameters for reactions studied were determined. Mechanistic consequences of all the results are discussed.     

Simple Method for Simultaneous Determination of Selenium and Arsenic in Human Hair by Means of Atomic Fluorescence Spectrometry with Hydride Generation Technique

This study describes a simple, rapid and reliable method for simultaneous determination of selenium and arsenic in human hair by means of atomic fluorescence spectrometry combined with a hydride generation technique (HG-AFS). The procedure developed encompasses microwave digestion of a sample in the nitric acid environment only. The interferences caused by nitrous oxides are eliminated by removing a gas from above the digested solution with a stream of argon. The sample is then chemically treated in a flow-through hydride generation system and exposed to measurements in a double-channel atomic fluorescence spectrometer. The method permits determining both analytes in the linear range of 0.5–100µgL^–1 with a detection limit equal to 0.2µgL^–1, as well as with very good repeatability not exceeding 1% for Se and 2% for As. No mutual interferences from either of the analytes in the concentrations ranges matching the hair composition were found. The method was verified in terms of accuracy with the use of a reference material and then applied to the analysis of the natural samples of human hair.     

Mutual Solubilities of Water and Alkanes

Summary.  The evaluation of mutual solubility data for systems water with n-alkanes, isoalkanes, and cycloalkanes along the three phase line is reported and a formula for the prediction of solubility of alkanes in water is developed. Then a cubic equation of state with an added term, which accounts for hydrogen bonding is used for correlation of liquid–liquid equilibrium data and for prediction of solubility of water in hydrocarbons using alkane in water solubility data. Comparison of the predicted and experimental solubilities is performed using all accessible experimental data. With this approach it is possible to predict the solubilities of water in alkanes with good accuracy over the temperature range up to about 20 K below critical temperature. Solubility of alkanes in water can also be calculated using experimental data for solubility of water in alkanes but results of these calculations are more sensitive to experimental errors of the data. Corresponding author: E-mail: macz@ichf.edu.pl Received August 5, 2002; accepted (revised) September 13, 2002 Published online March 13, 2003 RID="a" ID="a" Dedicated to Prof. Dr. H. Gamsj?ger on the occasion of his 70^th birthday anniversary