Acetylcholinesterase and butyrylcholinesterase inhibitory compounds from Chelidonium majus (Papaveraceae)

The roots and aerial parts of Chelidonium majus L. were extracted with EtOH and fractionated using CHCl3 and EtOH. Repeated column chromatography, preparative TLC and crystallization led to the isolation of five isoquinoline alkaloids, stylopine (3), chelidonine (4), homochelidonine (5), protopine (6), and allocryptopine (7), along with two isolation artifacts 6-ethoxydihydrosanguinarine (1) and 6-ethoxydihydrochelerythrine (2). All isolated compounds were tested for human blood acetylcholinesterase (HuAChE) and human plasma butyrylcholinesterase (HuBuChE) inhibitory activity. The isolation artifacts exhibited the highest activity against HuAChE and HuBuChE with IC50 values of 0.83 +/- 0.04 microM and 4.20 +/- 0.19 microM for 6-ethoxydihydrochelerythrine and 3.25 +/- 0.24 microM and 4.51 +/- 0.31 microM for 6-ethoxydihydrosanguinarine. The most active of the naturally-occurring alkaloids was chelidonine, which inhibited both HuAChE and HuBuChE in a dose-dependent manner with IC50 values of 26.8 +/- 1.2 microM and 31.9 +/- 1.4 microM, respectively.     

Synthesis, crystal structure, magnetic properties and reactivity of a Ni-Ru model of NiFe hydrogenases with a pentacoordinated triplet (S = 1) Ni center

The reaction of Ni(xbsms) (H₂xbsms = 1,2-bis(4-mercapto-3,3-dimethyl-2-thiabutyl)benzene) with [Ru(CO)₃Cl₂(thf)] yields green crystals of [NiCl(xbsms)Ru(CO)₃Cl]. The structure of this structural model of the active site of NiFe hydrogenase reveals a pentacoordinated nickel(II) center with bound chloride anion. It therefore adopts a paramagnetic (S = 1) electronic configuration as shown by magnetic susceptibility measurements. In DMF, this compound is converted into a red ionic-salt [NiL(xbsms)Ru(CO)₃Cl]Cl (L = water or DMF) that catalyzes hydrogen electro-evolution from Et₃NHCl at −1.52 V vs. Ag/AgCl (−2.05 V vs. Fc^0/+).     

Characterization of triacylglycerol and diacylglycerol composition of plant oils using high-performance liquid chromatography-atmospheric pressure chemical ionization mass spectrometry

Triacylglycerols (TGs) and diacylglycerols (DGs) in 16 plant oil samples (hazelnut, pistachio, poppy-seed, almond, palm, Brazil-nut, rapeseed, macadamia, soyabean, sunflower, linseed, Dracocephalum moldavica, evening primrose, corn, amaranth, Silybum arianum) were analyzed by HPLC-MS with atmospheric pressure chemical ionization (APCI) and UV detection at 205 nm on two Nova-Pak C18 chromatographic columns connected in series. A single chromatographic column and non-aqueous ethanol-acetonitrile gradient system was used as a compromise between the analysis time and the resolution for the characterization of TG composition of five plant oils. APCI mass spectra were applied for the identification of all TGs and other acylglycerols. The isobaric positional isomers can be distinguished on the basis of different relative abundances of the fragment ions formed by preferred losses of the fatty acid from sn-1(3) positions compared to the sn-2 position. Excellent chromatographic resolution and broad retention window together with APCI mass spectra enabled positive identification of TGs containing fatty acids with odd numbers of carbon atoms such as margaric (C17:0) and heptadecanoic (C17:1) acids. The general fragmentation patterns of TGs in both APCI and electrospray ionization mass spectra were proposed on the basis of MSn spectra measured with an ion trap analyzer. The relative concentrations of particular TGs in the analyzed plant oils were estimated on the basis of relative peak areas measured with UV detection at 205 nm.     

PHOTOTHERMAL DEFLECTION SPECTROSCOPY OF PHOTOSYNTHETIC PIGMENTS in vivo and in vitro

Abstract— This Technical Note describes the design of a photothermal beam deflection apparatus which allows the easy and rapid measurement of thermal dissipation of absorbed light energy in various photosynthetic materials including whole plant leaves. This system is based on the "mirage effect" in which the refractive index gradient induced in a fluid in contact with the sample, irradiated with an intensity-modulated light, causes the periodic deflection of a laser beam parallel to the sample surface. The deflection of the probe laser beam is detected by a position sensor, the output of which is processed by a lock-in amplifier. Photothermal deflection signals can be monitored in vivo in intact leaves placed in various (liquid or gaseous) environments with a satisfactory signal-to-noise ratio between 100 (in water) and 50 (in air) at low modulation frequencies (ca 30 Hz). It is shown that this new and simple photothermal technique is a very sensitive tool for the measurement of absorption spectra of photosynthetic pigments both in vivo (leaves, algae or chloroplasts) and in model systems (Langmuir-Blodgett and solid films of chlorophyll).     

Fast isolation of hydrophobic organic environmental contaminants from exposed semipermeable membrane devices (SPMDs) prior to GC analysis

Semipermeable membrane devices (SPMD) represent a passive sampling technology that is becoming widely used for monitoring of surface waters pollution. While "classic" procedures employ dialysis to recover target compounds from exposed SPMDs, in the present study analytes were isolated from cut membrane together with sequestering medium (triolein) using hexane as an extraction solvent. This approach allowed us to reduce the time needed for accomplishment of isolation step from 48 h to only 1 h. Automated gel permeation chromatography (GPC) clean-up is employed in the following step to separate triolein from analytes fraction. Musk compounds (MCs), polychlorinated biphenyls (PCBs), brominated flame retardants (BFRs) and several other persistent organochlorine compounds (OCs) were determined in the respective fraction by GC method employing selective detectors (MSD, ECD). As shown in a series of analyses of SPMDs deployed in various aquatic ecosystems, high recoveries and good repeatability of results together with a possibility to obtain the information on the pollution of sampling site at the day of sample arrival to laboratory make this newly implemented procedure an interesting alternative to time consuming dialysis.     

An improved protocol for the selective hydroaminomethylation of arylethylenes

The hydroaminomethylation of arylethylenes with anilines proceeds under mild conditions in the presence of [Rh(cod)₂BF₄] and dppf as catalyst system to give the corresponding branched amphetamine derivatives in good selectivity and yield.     

Sequential Injection Analysis for Automation and Evaluation of Drug Liberation Profiles: Clotrimazole Liberation Monitoring

A fully automated sequential injection system was tested in terms of its application in liberation testing, and capabilities and limitations were discussed for clotrimazole liberation from three semisolid formulations. An evaluation based on kinetic profiles obtained in short and longer sampling intervals and steady-state flux values were applied as traditional methods. The obtained clotrimazole liberation profile was faster in the case of Delcore and slower for Clotrimazol AL and Canesten cream commercial formulations. The steady-state flux values for the tested formulations were 52 µg cm⁻² h⁻¹ for Canesten, 35 µg cm⁻² h⁻¹ for Clotrimazol AL, and 7.2 µg cm⁻² h⁻¹ for Delcore measured in 4 min sampling intervals. A simplified approach for the evaluation of the initial rate based on the gradient between the second and third sampling points was used for the first time and was found to correspond well with the results of the conventional methods. A comparison based on the ratio of the steady-state flux and the initial rate values for Canesten and Clotrimazol AL proved the similarity of the obtained results. The proposed alternative was successfully implemented for the comparison of short-term kinetic profiles. Consequently, a faster and simpler approach for dissolution/liberation testing can be used.     

Ceramic pigments based on doped strontium stannates

This study reports the development of red-shade inorganic pigments based on chromium- and terbium-doped strontium stannate. Perovskite compounds belong to group of high-temperature pigments. Powder samples were prepared by the conventional ceramic method, i.e. solid-state reaction. Pigments were characterized by X-ray diffraction analysis and thermal analysis. Powder morphology was analysed by scanning electron microscopy. The colouring mechanism seems to result from the combined contribution of octahedral Cr(III) and tetrahedral Cr(IV) species replacing Sn⁴⁺. Colorimetric parameters were evaluated by measuring the reflectance in the visible region of light, and their colouring performance was tested in an organic matrix and transparent ceramic glazes. Intense reddish brown hues were developed with optimized formulations, i.e. containing 0.1 Cr and 0.1 Tb at 1,350 °C.     

Modular Construction of Fluoroarenes from a New Difluorinated Building Block by Cross‐Coupling/Electrocyclisation/Dehydrofluorination Reactions

Palladium‐catalysed coupling reactions based on a novel and easy‐to‐synthesise difluorinated organotrifluoroborate were used to assemble precursors to 6π‐electrocyclisations of three different types. Electrocyclisations took place at temperatures between 90 and 240 °C, depending on the central component of the π‐system; nonaromatic trienes were most reactive, but even systems that required the temporary dearomatisation of two arenyl subunits underwent electrocyclisation, albeit at elevated temperatures. Photochemical conditions were effective for these more demanding reactions. The package of methods delivered a structurally diverse set of fluorinated arenes, spanning a 20 kcal mol^?1 range of reactivity, by a flexible route.     

LC‐MS/MS method for the determination of haemanthamine in rat plasma,bile and urine and its application to a pilot pharmacokinetic study

Evidence gathered in various studies points to the fact that haemanthamine, an isoquinoline alkaloid, has multiple medicinally interesting characteristics, including antitumor, antileukemic, antioxidant, antiviral, anticonvulsant and antimalarial activity. This work presents, for the first time, a universal LC‐MS/MS method for analysis of haemanthamine in plasma, bile and urine which has been verified in a pilot pharmacokinetic experiment on rats. Chromatographic separation was performed on a pentafluorophenyl core–shell column in gradient elution mode with a mobile phase consisting of acetonitrile–methanol–ammonium formate buffer. A sample preparation based on liquid–liquid extraction with methyl tert‐butyl ether was employed with ambelline used as an internal standard. Quantification was performed using LC‐MS‐ESI(+) in Selected Reaction Monitoring mode. The method was validated according to the European Medicines Agency guideline in a concentration range of 0.1–10 μmol/L in plasma, bile and urine. The concentration–time profiles of haemanthamine in plasma, bile and urine after a single i.v. bolus of 10 mg/kg have been described for the first time. The presented study addresses the lack of information on haemanthamine pharmacokinetics and also introduces a new universal method of haemanthamine analysis in complex biological matrices. Copyright © 2015 John Wiley & Sons, Ltd.