1,1,1,1-Tetrakis(o-fluorophenylamino)silane tris[titanium(IV) chloride]. Evidence for a new titanium cation [Ti2Cl7]+

Si(NHC₆H₄F-o)₄ · 3TiCl₄ (1) has been obtained from the disproportionation of (CF₃CH₂O)₃SiNHC₆H₄F-o and TiCl₄ in petroleum ether (40–60 °C) at –10 °C. The analytical (elemental analysis, molar conductance) and spectral (i.r., ¹H- and ¹⁹F-n.m.r.) data suggested that (1) behaves as [Si(NHC₆H₄F-o)₄ · Ti₂Cl₇]⁺ [TiCl₅]^–. The presence of these ions has been confirmed by characterising the products of metathetical reactions of (1) with R₄NX (R = Bu and Et; X = I and Br) and with AgNO₃. The data suggest the presence of a new titanium cation [Ti₂Cl₇]⁺.     

Ammonium tetraphenylborate-naphthalene adsorbent for the preconcentration and trace determination of uranium in standard alloys and synthetic samples using 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol by fourth-derivative spectrophotometry

A solid ion-pair material produced from ammonium tetraphenylborate (ATPB) and naphthalene has been used for the preconcentration of uranium from the large volume of its aqueous complex samples. Uranium reacts with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) to form a water insoluble, coloured complex. This complex is quantitatively retained on the ATPB-naphthalene adsorbent filled in a column in the pH range 7.0–9.5 and at a flow rate of 2 ml/min. The solid mass from the column is dissolved with 5 ml of dimethylformamide (DMF) and uranium is determined by fourth-derivative spectrophotometry. The calibration curve is linear over the concentration range of 0.13–15.0 g of uranium in 5 ml of the final DMF solution. Seven replicate determinations of 6 g of uranium gave a mean peak height (peak-to-peak signal between 592 nm and 582 nm) of 1.02 with a relative standard deviation of 0.95%. The sensitivity is 0.8419 (d⁴A/d⁴)/(g ml^–1) found from the slope of the calibration curve. The interference of a large number of anions and cations on the estimation of uranium has been studied and the method applied for the determination of uranium in coal fly ash, Zr-base alloy and some synthetic samples corresponding to standard alloys.     

Polarographic determination of cadmium, lead, nickel, thallium and uranium(VI) in isoquinoline formate

Summary The polarographic behaviour of Cd, Pb, Ni, Tl and U(VI) has been described in 0.1 M isoquinoline formate as base electrolyte. In all cases well defined reversible waves were obtained and determinations are possible in the presence of Mo, Co, Zn, Mn, Te, In, Se, Fe, Cr, V, Th, Zr, As, Sb, Ag, Hg and Cu.

---

Polarographische Bestimmung von Cadmium, Blei, Nickel, Thallium und Uran(VI) in Isochinolinformiat

Zusammenfassung Das polarographische Verhalten von Cd, Pb, Ni, Th. und U(VI) in 0,1 M Isochinolinformiatlösung wird beschrieben, Bestimmungsmöglichkeiten werden aufgezeigt. In allen Fällen werden gut definierte reversible Stufen erhalten. Folgende Elemente stören nicht: Mo, Co, Zn, Mn, Te, In, Se, Fe, Cr, V, Th, Zr, As, Sb, Ag, Hg, Cu.

     

Extractive spectrophotometric determination of chromium(III) with phenanthrenequinone monoxime into molten naphthalene

Conditions have been developed for the determination of chromium after extraction of its phenanthrenequinone monoximate into molten naphthalene in the presence of potassium chloride. The solidified naphthalene-containing chromium complex was dissolved in chloroform and the trace amounts of chromium determined spectrophotometrically. Beer's law holds in the concentration range of 5.2–84.3 μg in 10 ml of the chloroform solution. The molar absorptivity and sensitivity (for an absorbance of 0.001) are calculated to be 6.65 × 10³ liters mol⁻¹ cm⁻¹ and 0.00782 μg/cm². Ten replicate solutions containing 31.2 μg of chromium(III) gave a mean absorbance of 0.399 with a relative standard derivation of 0.00497. Interference of various ions has been studied and the method applied for the determination of chromium(III) in certain alloys.     

Trifluoroethylxanthate as an Analytical Reagent: AAS of Zinc,Antimony and Lead After Coprecipitation of Their Trifluoroethylxanthates onto Microcyrstalline Naphthalene

Abstract

A sensitive method has been developed for the direct atomic absorption spectrometric determination of zinc, antimony and lead after coprecipitation of their trifluoroethylxanthates onto microcrystalline naphthalene. The metal xanthates are quantitatively coprecipitated over the pH ranges: Zn, 5.9–8.4; Sb, 4.0–6.0 and Pb, 4.0–11.0. The solid mass consisting of the metal complex and naphthalene is dissolved in DMF. This solution is aspirated into an air-acetylene flame at 213.9, 217.6 and 217.0nm for Zn, Sb and Pb, respectively. Beer's law is obeyed in the concentration range 2–50, 3–90 and 5–60 μg of Zn, Sb and Pb, respectively in 10ml of the final DMF solution. RSDs are at the ± (0.5–0.6)% level (n=10). The concentration for 1% absorption is 0.019, 0.035 and 0.060μg/ml for Zn, Sb and Pb, respectively. The method is suitable for the preconcentration of the metals from a larger volume of the aqueous phase, and has been employed for their determination in standard reference materials. It may be employed for the simultaneous determination of Zn, Pb and Sb in a solution by pH control.     

Supported dual‐acidic 1,3‐disulfoimidazolium chlorozincate@HZSM‐5 as a promising heterogeneous catalyst for synthesis of indole derivatives

HZSM‐5‐supported Brönsted and Lewis acidic ionic solid 1,3‐disulfoimidazolium chlorozincate materials ([dsim]₂[ZnCl₄]@HZSM‐5) were synthesized with various ratios (3, 6, 9, 17 and 50% w/w). The heterogeneous materials were characterized via a variety of spectroscopic techniques. Dual acidity of these materials was determined using specified techniques. These acidic solids were examined as stable heterogeneous catalysts for the Fischer indole reaction of equimolar amounts of phenylhydrazine hydrochloride and various aliphatic or aromatic ketones at 80–90°C in neat condition to produce substituted indole derivatives. The efficient 17% ionic salt‐loaded HZSM‐5 composite was easily reused for ten consecutive cycles with a slight loss of its activity. The recycled catalyst was further analysed using powder X‐ray diffraction and inductively coupled plasma optical emission spectrometric techniques.     

Catalytic behavior of decomposed molybdophosphoric acid supported on alumina for oxidative dehydrogenation of ethane to ethylene

Oxidative dehydrogenation of ethane (ODHE) to ethylene was investigated over a series of alumina supported molybdophosphoric acid (MPA) catalysts. The MPA was transformed into surface Mo oxides on Al₂O₃ when subjected to calcination at 600°C. The catalysts were characterized by N₂-adsorption, XRD, FT-IR spectroscopy and TPR techniques. The results showed that MPA loading and the source of Mo precursor had a clear influence on the catalytic performance. The evaluation of the catalysts for ODHE at temperatures between 450 and 550°C revealed superior ethane conversion (X～24%) and ethylene selectivity (S = ca. 65%) over 20 wt % MPA/Al₂O₃ catalyst. The transformation of MPA into finely dispersed Mo oxides on Al₂O₃ appeared to be responsible for this improved performance.     

The relationship between nanosilica dispersion degree and the tensile properties of polyurethane nanocomposites

The tensile properties and structure of silica-based polyurethane (PU) nanocomposites were parametrically studied as a function of silica type and weight concentration, polyol OH number, and mixing methods. The variation of the silica functionalization groups (from silanols to silazanes) had a relevant effect on dispersion. An elevated interparticle distance of the silica agglomerates improved substantially the tensile strength (from 44.3 to 82.8 MPa) and strain to failure (from 3.0 to 7.95) while maintaining elastic modulus (from 2.08 to 2.31 GPa) with respect to the neat PU matrix. Polyol’s with different OH numbers have shown to dramatically modify the silica dispersion degree by the modification of the stability of the colloidal dispersion. An increase of its value deteriorated dispersion and the tensile properties of the nanocomposites. The effect of three dispersion methods (ultrasonic dispersion, high shear mixing, and tip sonication) has shown to have a relative effect on the reduction of agglomerate size and the interparticle distance. High power sonication methods were more effective in reducing agglomerate size in contrast to shear methods. Classical theories of colloidal dispersion (Derjaguin, Landau, Verwey, and Overbeek) have been able to explain the correlation between the silica aggregation state and the final tensile properties of the nanocomposite.