Thermokinetic parameters analysis for 1,1-bis-(tert-butylperoxy)-3,3,5-trimethylcyclohexane at isothermal conditions for safety assessment

The rapid development of the petrochemical industry of Taiwan over the past four decades has resulted in a booming economy in Taiwan that drives derived industries to develop progressively. However, it has also caused many runaway reaction accidents, such as toxic gas release, fire, and explosion. It is crucial to eliminate those potential hazard factors which can induce consequent runaway reaction accidents during the life span of the manufacturing process. In response to this crucial issue, we performed a thermokinetic parameter analysis for 1,1-bis-(tert-butylperoxy)-3,3,5-trimethylcyclohexane at isothermal conditions to conduct a thermal safety assessment of chemical materials. The five isothermal temperatures, 90, 100, 110, 120, 130, and 140 °C, measured by DSC, were adopted in this study to calculate process safety parameters, including TMR_ad, T _NR, and SADT, which can be employed in process safety parameters for the manufacturing process. A novel, green kinetic approach accompanied with non-isothermal DSC results is used to derive thermokinetic parameters in safety protocol in this study.     

Redox Chemistry of a Hydroxyphenyl‐Substituted Borane

Chemical reduction of a hydroxyphenyl‐substituted borane triggers a sequential electron‐ and intramolecular hydrogen‐atom‐transfer process to afford a hydridoborate phenoxide dianion. On the other hand, hydrogen‐atom abstraction of the borane leads to the isolation of a neutral borylated phenoxyl radical, which can be transformed to the corresponding benzoquinone borataalkene derivative by reduction with cobaltocene.     

D3R grand challenge 4: blind prediction of protein–ligand poses,affinity rankings,and relative binding free energies

Journal of Computer-Aided Molecular Design - The Drug Design Data Resource (D3R) aims to identify best practice methods for computer aided drug design through blinded ligand pose prediction and...     

Effects of Al concentration and resulting long-period superstructures on the plastic properties at room temperature of Al-rich TiAl single crystals

The role of Al₅Ti₃ and h-Al₂Ti long-period superstructures on the plastic properties of TiAl at room temperature is investigated on five single crystals with aluminium content comprised between 54.7 at.%, and 62.5 at.%. After annealing at 1200°C for 1?h, the Al₅Ti₃ superstructure develops in the L1₀ (γ) matrix upon increasing Al concentration except for Ti–62.5 at.%Al where h-Al₂Ti substitutes for Al₅Ti₃. The CRSS for <110]{111} first increases abruptly with the development of the Al₅Ti₃-type ordering. Then, the CRSS reaches a plateau at which dislocations assemble in groups of four to prevent extra anti-phase boundary (APB) from being engendered during glide throughout the Al₅Ti₃ phase. In Ti–62.5 at.%Al, the CRSS for ordinary slip further increases upon the precipitation of h-Al₂Ti in the L1₀ phase, whereas it decreases when the crystal is fully transformed into single-phased Al₅Ti₃. <101] superlattice dislocations are primarily activated under both the [210] and [1?1?8.6] load orientations irrespective of the Al concentration, but the dislocation microstructure strongly depends on orientation as well as on the degree of Al₅Ti₃ ordering. In the [210] orientation, the frequency of the decomposition of <101] dislocations into 1/2<110] and 1/2<112] dislocations decreases abruptly with the development of Al₅Ti₃. This is interpreted in terms of the increased difficulty to move ordinary dislocations. Under the [1?1?8.6] orientation, the density of faulted dipoles diminishes remarkably with the development of Al₅Ti₃. This is consistent with the transformation of the low energy extrinsic stacking fault of the L1₀ phase into a higher energy complex extrinsic stacking fault.     

White light electroluminescence from graphene‐enhanced single polymer comprising two color emitters of equal molar ratios

White polymeric light‐emitting diode (WPLED) based on a single polymer, poly(3‐hexylthiophene‐alt‐9,9‐dioctylfluorene) (PTAF), has been successfully demonstrated. This conjugated alternating copolymer, PTAF, comprises 50 mol % of 3‐hexylthiophene which is an orange‐red color chromophore and 50 mol % 9,9‐dioctylfluorene which is a bluish‐green color chromophore. It was synthesized by Suzuki cross‐coupling reaction and has a molecular weight of 15,021 and polydispersity of 1.36. Nanocomposite consisting PTAF and graphene nanosheets enhances the optoelectronic properties and the device fabricated with a configuration of ITO/PEDOT:PSS/(PTAF + 1% graphene)/Ca/Al shows two‐color white electroluminescence with CIE 1931 coordinates of (0.28, 0.34). The white luminescence from a single polymer affords the WPLED device a simple structure and low fabrication cost. © 2011 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2011     

On the development of a triple‐preserving Maxwell's equations solver in non‐staggered grids

We present in this paper a finite difference solver for Maxwell's equations in non‐staggered grids. The scheme formulated in time domain theoretically preserves the properties of zero‐divergence, symplecticity, and dispersion relation. The mathematically inherent Hamiltonian can be also retained all the time. Moreover, both spatial and temporal terms are approximated to yield the equal fourth‐order spatial and temporal accuracies. Through the computational exercises, modified equation analysis and Fourier analysis, it can be clearly demonstrated that the proposed triple‐preserving solver is computationally accurate and efficient for use to predict the Maxwell's solutions. Copyright © 2009 John Wiley & Sons, Ltd.     

Structural properties and electrical characteristics of high-k Dy2O3 gate dielectrics

This paper describes the structural properties and electrical characteristics of thin Dy₂O₃ dielectrics deposited on silicon substrates by means of reactive sputtering. The structural and morphological features of these films after postdeposition annealing were studied by X-ray diffraction and X-ray photoelectron spectroscopy. It is found that Dy₂O₃ dielectrics annealed at 700 °C exhibit a thinner capacitance equivalent thickness and better electrical properties, including the interface trap density and the hysteresis in the capacitance-voltage curves. Under constant current stress, the Weibull slope of the charge-to-breakdown of the 700 °C-annealed films is about 1.6. These results are attributed to the formation of well-crystallized Dy₂O₃ structure and the reduction of the interfacial SiO₂ layer.     

Novel titration method for surface-functionalised silica

This paper describes three inexpensive and fast analytical methods to characterise grafted particle surfaces. The reaction of silica with (3-aminopropyl)triethoxysilane, (3-mercaptopropyl)trimethoxysilane and N-(phosphonomethyl)iminodiacetic acid hydrate, respectively, leads to NH₂-, SO₃H- or COOH-functionalised silica, which were characterised by X-ray photoelectron spectrometry and titration in nonaqueous media as well as with two titration methods in a water-based environment. In the work presented, factors influencing the titrations are pointed out and solutions are presented to overcome these limiting factors are shown.