Influence of structure and solubility of chain transfer agents on the RAFT control of dispersion polymerisation in scCO2

Reversible addition–fragmentation chain transfer (RAFT) dispersion polymerisation of methyl methacrylate (MMA) is performed in supercritical carbon dioxide (scCO₂) with 2-(dodecylthiocarbonothioylthio)-2-methylpropionic acid (DDMAT) present as chain transfer agent (CTA) and surprisingly shows good control over PMMA molecular weight. Kinetic studies of the polymerisation in scCO₂ also confirm these data. By contrast, only poor control of MMA polymerisation is obtained in toluene solution, as would be expected for this CTA which is better suited for acrylates. In this regard, we select a range of CTAs and use them to determine the parameters that must be considered for good control in dispersion polymerisation in scCO₂. A thorough investigation of the nucleation stage during the dispersion polymerisation reveals an unexpected “in situ two-stage” mechanism that strongly determines how the CTA works. Finally, using a novel computational solvation model, we identify a correlation between polymerisation control and degree of solubility of the CTAs. All of this ultimately gives rise to a simple, elegant and counterintuitive guideline to select the best CTA for RAFT dispersion polymerisation in scCO₂.

RAFT dispersion polymerisation of methyl methacrylate is performed in scCO₂ with 2-(dodecylthiocarbonothioylthio)-2-methylpropionic acid (DDMAT) present as chain transfer agent (CTA) and surprisingly shows good control over PMMA molecular weight.     

Synthesis of non-agglomerated Ba<Subscript>0.77</Subscript>Ca<Subscript>0.23</Subscript>TiO<Subscript>3</Subscript> nanopowders by a modified polymeric precursor method

In this work, we have studied the influence of the pH on the synthesis and structural properties of the Ba_0.77Ca_0.23TiO₃ nanopowders synthesized by a modified polymeric precursor method, in order to achieve non-agglomerated powders. Synthesis, morphology, thermal reactions, crystallite and average particle size of the synthesized powders were investigated through thermal analysis (DTA/TG), X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM) and Infrared spectroscopy. In summary, Ba_0.77Ca_0.23TiO₃ nanopowders were synthesized for the first time at a relative low temperature (500 °C). It was also found that the alkalinity and acidity of the solution presented a great influence on the powder properties. The best results were obtained from solutions with pH = 8.5 and 11 whose nanopowders presented weakly agglomerate, with homogeneous particle size and a narrow size distribution (30–40 nm). This behavior could be explained based on the FT-IR results in which it was possible to see the increased of the chelation in higher pHs.     

Principal component analysis of the effects of wavefunction modification on the electrostatic potential of indole

The molecular electrostatic potential (MEP) of the indole molecule was calculated in a three‐dimensional grid in which the molecule was centered at the origin. To evaluate the dependence of MEP on the type of calculation, semiempirical, ab initio, and density functional theory methods with different basis sets were employed. The data matrix generated by these calculations was analyzed by principal component analysis (PCA). The appearance of outliers and the effect of wavefunction modifications such as the introduction of electron correlations and diffuse functions were highlighted by the use of PCA. The spatial localization of such effects around the molecule was possible from the loadings values associated with the graphical analysis of the grid points. © 2004 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Flexible ureasil hybrids with tailored optical properties through doping with metal nanoparticles

Hybrid organic-inorganic nanocomposites containing uniform distributions of metal nanoparticles have been prepared by mixing a preformed nanoparticle colloid with the precursors of a ureasil, prior to the sol-gel transition. These nanocomposites possess not only high optical quality and optical features dictated by the size and shape of the nanoparticle dopants but also a high degree of flexibility, which can largely enhance the range of applications in practical devices. The deposition of a uniform silica shell on the nanoparticle surface prior to the sol-gel transition was found to be required to maintain the colloidal stability during the process and, thus, to retain the optical properties in the final nanocomposite material. This method can be readily extended to other materials, such as semiconductor and magnetic nanoparticles.     

Sequential atomic absorption spectrometric determination of nitrate and nitrite in meats by liquid-liquid extraction in a flow-injection system

Sequential determinations of nitrate and nitrite based on continuous liquid-liquid extraction, and suitable for their routine determinations in meats, are reported. Nitrate reacts with bis(2,9-dimethyl-1,10-phenanthrolinato)copper(I) to form an ion-pair which is extrated into 4-methyl-2-pentanone in a flow-injection manifold. In one aliquot of sample, nitrite is oxidized by cerium(IV), so that total nitrate is determined. In another, nitrite is converted to nitrogen with sulfamic acid, so that only the original nitrate is determined. By measuring the atomic absorption signal of copper in the organic phase, mixtures of these anions can be determined at μg ml^?1 levels for nitrate/nitrite ratios from 10:1 to 1:10, with a sampling frequency of ca. 20 h^–1.     

Evaluation of isothermal kinetic of sweetener

Summary Sulfonylureas are widely used for the treatment of non-insulin dependent diabetes mellitus. Glibenclamide belongs to the group of substituted arylsulfonylureas. Many representative of this group shows polymorphism. The purpose of this work was to investigate the thermal behaviour and compatibility between glibenclamide and some excipients using thermoanalytical techniques (TG-DTG/DSC). The thermal and isothermal kinetics data showed incompatibility between glibenclamide and magnesium stearate.     

π‐Facial Selectivity in the Formation of Tricarbonylchromium(0) Complexes of Estra‐1, 3, 5(10), 6‐tetraenes

The preparation of two η⁶‐estra‐1, 3, 5(10), 6‐tetraene tricarbonylchromium complexes 4 and 6 are described. In both cases only one stereoisomer can be isolated, in contrast to other estrane‐tricarbonylchromium complexes, where complexations are non‐stereoselective. X‐ray crystal structural analysis of 4 discloses that only the more sterically hindered β‐facial isomer is formed. It is assumed that the 6, 7‐olefinic moiety exerts a directive influence on the complexation.     

Fluorescence quenching of anthropogenic fulvic acids by Cu(II), Fe(III) and UO(2)(2+)

The quenching of the fluorescence of three anthropogenic fulvic acids (FA) provoked by Cu(II) (pH 6.0), Fe(III) (pH 4.0) and UO₂²⁺ (pH 3.5), was analyzed by a non-linear method and by Stern-Volmer plots. The FA samples were extracted from composted sewage sludges (csFA), composted municipal wastes (mwFA) and composted livestock wastes (lsFA). Synchronous-scan fluorescence (SyF) spectra were collected as a function of metal ion concentration. Spectral data were treated by a self-modeling mixture analysis method (SIMPLISMA) to detect the SyF spectral band with the strongest quenching and to calculate the corresponding quenching profile. The analysis of these profiles by a non-linear method allowed the estimation of conditional stability constants (K) and of the percentage of non-complexing fluorophores. The same quantitative information was obtained by the modified Stern-Volmer equation taking into account the existence of fluorophores that do not participate in the complexation. Good agreement was found between the results of the two procedures. The log K calculated by the non-linear method were (standard deviation in parenthesis): csFA, Cu(II), 4.22 (5); Fe(III), 5.0 (1); UO₂²⁺, 5.2 (2); mwFA, Cu(II), 4.21 (3); Fe(III), 5.6 (2); UO₂²⁺, 4.7 (3); lsFA, Cu(II), 4.51 (8); Fe(III), 5.5 (2); UO₂²⁺, 3.6 (2).     

Molecular structure and polarity of the C3NH carbene

Ab initio MP 2/4-31G ** calculations indicate that the most stable form of C₃NH is bent and singlet and that the linear structure corresponds to a maximum. The effect of changing the CNH angle on the total energy is slight, but it is quite pronounced on the molecular polarity. The wider angle tends to increase the polarity of C₃NH. MP 2/4-31G ** calculations predict a difference of polarity between linear and bent structures of 0.8 D.     

Transport properties of alkyltrimethylammonium bromide surfactants in aqueous solutions

Differential mutual diffusion coefficients of n-alkyltrimethylammonium bromides [CH₃(CH₂)_n–1N(CH₃)₃Br, C_nTAB] (n=10, 12, 14, 16) have been measured in aqueous solutions at 298.15 K using a conductimetric cell and an automatic apparatus to follow diffusion. The cell is based on an open-ended capillary, and the technique follows the diffusion process by measuring the resistance of a solution inside the capillaries at various times. The electrical conductances of those solutions have also been measured to calculate the critical micellar concentration (cmc). Thermodynamic analysis of the data suggests that the free ion concentration decreases at concentrations above the cmc, in agreement with theoretical predictions. The obtained values of the micellization parameters were used to model the mutual diffusion coefficients of C_nTAB aqueous solutions.