光学低通滤波器的光学传递函数分析

光电成像系统的抽样过程会引起图像频谱在频谱空间上的多次复制,如果抽样过程不满足系统的奈奎斯特条件,相邻的频谱项就会产生混叠.光学传递函数可以反映系统中光学成像,抽样和重建等各个过程对图像信号频谱的响应.通过对使用光学低通滤波器(OLPF)光电成像系统的光学传递函数的分析,表明光学低通滤波器可以有效地限制图像的频谱宽度,使抽样满足奈奎斯特条件,达到消除频谱混叠,改善重建图像质量的目的.     

现代天文谱新篇——IAU投票界定太阳系行星

在2006年8月24日当地时间下午2点（北京时间晚9点30分）于捷克首都布拉格会议中心举行的国际天文学联合会IAU第26届代表大会上，来自不同国家的近500名正式代表，以举手表决的方式通过了执委会提出的关于太阳系行星定义的决议．该决议第一次明确提出了太阳系天体的分类规则：把太阳系中的行星和其他天体分为行星、矮行星、太阳系小天体三类；把矮行星中以冥王星为标志的海王外天体分为一个新的族。     

烷氧基取代聚对苯乙炔三阶非线性光学性能

通过双醚化反应、氯甲基化反应以及在强碱性条件下进行的脱氯化氢反应制备聚（2-甲氧基-5-丁氧基）对苯乙炔（PMOBOPV）、聚（2-甲氧基-5-己氧基）对苯乙炔（PMOHOPV）、聚（2,5-二丁氧基）对苯乙炔（PDBOPV）和聚（2,5-二己氧基）对苯乙炔（PDHOPV）等四种可溶性聚对苯乙炔（PPV）衍生物，通过紫外-可见吸收光谱对产物分子结构进行表征.结果显示，PMOBOPV、PMOHOPV、PDBOPV和PDHOPV的共轭π电子发生π → π* 跃迁的吸收峰分别位于491 nm、495nm、504nm和510nm处，相应的光学禁带宽度分别为2.23eV、2.18eV、2.12eV和2.07eV.利用简并四波混频技术测量PPV衍生物的三阶非线性光学性能，探讨了分子结构对PPV衍生物三阶非线性极化率（χ(3)）的影响.研究发现，激发波长为532 nm时，PMOBOPV、PMOHOPV、PDBOPV和PDHOPV的共振χ(3)值分别为3.45×10－10、5.13×10－10、7.15×10－10和9.61×10－10 esu；激发波长为1064 nm时，它们的非共振χ(3)值分别为1.09×10－11、1.42×10－11、1.62×10－11和2.14×10－11 esu.     

掺钕聚甲基丙烯酸甲酯的光学特性

研究了制备的掺钕螯合物Nd(DBM)3Phen材料的吸收光谱、激发光谱、荧光光谱,应用Judd-Ofelt理论计算了该材料的强度参量．分析了钕离子激发态4F3／2的辐射寿命(631 μs)和4F3／2→4IJ′跃迁的受激发射截面和荧光分支比．     

Crystallographic report: catena‐Aqua(2,2′‐bipyrimidine)lithium(I) perchlorate

A lithium(I) coordination polymer has been formed from LiClO₄ and the 2,2′‐bipyrimidine (bpym) ligand in which each square pyramidal lithium(I) atom is coordinated in the basal plane by four nitrogen donor atoms derived from two bpym ligands and one water molecule at the apical position. These are connected into a layer structure via hydrogen‐bonding interactions involving the perchlorate anions. Copyright © 2004 John Wiley & Sons, Ltd.     

The amplified model of erbium-doped fiber amplifier (EDFA) with cross-phase modulation (XPM)

Based on the rate equations and the power propagation equations, the amplified model is obtained which considers the cross-phase modulation (XPM)-induced intensity fluctuation between pump power and signal power in erbium-doped fiber amplifier (EDFA). Simulation results show: a higher nonlinear coefficient and a stronger pump power cause a stronger XPM in EDFA. Before the optimal length of EDF, the intensity caused by XPM increases with the increasing length, but after the optimal length, the XPM presents saturation. A bigger nonlinear coefficient γ corresponds to a smaller optimal length and gain, and makes gain saturation more easy. XPM effect will decrease EDFA’s amplified efficiency.     

MC模式下顾客需求与厂商供应的纳什均衡

在大规模定制(MC，Mass Customization)模式下，基于市场需求的复杂化，厂商对个性化的顾客需求很难做出及时准确的反应，而且由于其自身生产能力的限制，不可能对所有的个性化用户进行一一地满足，只可能对已经存在的个性化需求，根据自身的生产能力和规模，以利润最大化及顾客对产品的满意度为目标，对个性化需求进行较准确地预测，从而正确指导生产。本通过博弈论的方法，提出了一个基于顾客对产品的满意度及企业的利润的一个非合作博弈模型，并给出求解纳什均衡的方法。     

Low Cost, High Efficiency, Gain Flattened L Band EDFA Using FBGs as C Band Seed Generators

A low cost, coolerless 980nm diode pumped, gain flattened L band EDFA with fast transient control, high pump efficiency and gain clamping effect was realized by using FBGs as C band seed generators.     

Living/controlled radical copolymerization of N‐substituted maleimides with styrene in 1‐butyl‐3‐methylimidazolium hexafluorophosphate and anisole

The atom transfer radical copolymerization of N‐substituted maleimides such as N‐phenylmaleimide (PhMI), N‐cyclohexylmaleimide (ChMI), and N‐butylmaleimide (NBMI) with styrene initiated with dendritic polyarylether 2‐bromoisobutyrates in an ionic liquid, 1‐butyl‐3‐methylimidazolium hexafluorophosphate ([bmim][PF₆]), at room temperature and anisole at 110 °C was investigated. The dendritic‐linear block copolymers obtained in ionic liquid possessed well‐defined molecular weight and low polydispersity (1.05 < M_w/M_n < 1.32) and could be used as a macroinitiator for chain‐extension polymerization, suggesting the living nature of the reaction system. The ionic liquids containing catalyst could be recycled in the atom transfer radical polymerization systems without further treatment. Compared with polymerization conducted in anisole, the polymerization in ionic liquid had a stronger tendency for alternation. The tendency for alternation decreased in the order PhMI > NBMI > ChMI in [bmim][PF₆] and PhMI > ChMI > NBMI in anisole. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2156–2165, 2003     

Yellow‐light‐emitting cyano‐substituted poly[(1,3‐phenylene vinylene)‐alt‐(1,4‐phenylene vinylene)] derivative: Its synthesis and optical properties

A soluble cyano‐substituted poly[(1,3‐phenylene vinylene)‐alt‐(1,4‐phenylene vinylene)] derivative ( 9 ) was synthesized and characterized. Comparison between 9 and its model compound ( 10 ) showed that the chromophore in 9 remained to be well defined as a result of a π‐conjugation interruption at adjacent m‐phenylene units. The attachment of a cyano substituent only at the β position of the vinylene allowed the maximum electronic impact of the cyano group on the optical properties of the poly(p‐phenylene vinylene) material. At a low temperature (?108 or ?198 °C), the vibronic structures of 9 and 10 were partially resolved. The absorption and emission spectra of a film of 9 were less temperature‐dependent than those of a film of 10 , indicating that the former had a lower tendency to aggregate. A light‐emitting diode (LED) based on 9 emitted yellow light (λ_max ≈ 578 nm) with an external quantum efficiency of 0.03%. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3149–3158, 2003