The theoretical basis of column chromatography in multicomponent separations. Part 2: Peak capacity. Column systems with good selectivity

The selectivity of a column system, S, defined by equation 28, includes a variation coefficient (β) of plate number with capacity ratio which has a large influence on the peak capacity, as shown in Fig. 18. Some typical chromatograms are given. In order to predict S for a column system from Kovat's Index, equations 40 and 41 are given to calculate the constant of the carbon number rule for squalane at different temperatures or for different stationary phases. The specific retention value of heptane on squalane at different temperatures can be calculated from equation 42. The nonpolarity index, defined by equation 43, was used to calculate the retention value of heptane on various stationary phases. In liquid chromatography, the order of elution may be reversed by changing the composition of the eluent on the same chemically bonded silica (manufactured in China). The linear relations between the log retention values of different kinds of solutes or of a single solute on the silicas of different surface areas when using the same eluent are given.     

Efficient degradation of organic pollutants mediated by immobilized iron tetrasulfophthalocyanine under visible light irradiation

Supported iron tetrasulfophthalocyanine can efficiently catalyze the degradation of organic pollutants by H2O2 under visible light irradiation in an aqueous solution, and the catalyst can be easily recycled without apparent loss of activity.     

Theoretical study of the ring‐closing reaction of 5′‐AMP to cAMP and H2O in the gas phase

The ring‐closing reaction of 5′‐adenosine monophosphate (5′‐AMP) to generate cyclic 3′, 5′‐adenosine monophosphate (cAMP) and H₂O was theoretically investigated at the B3LYP/6‐31G**level. It was found that the ring‐closing reaction of 5′‐AMP may proceed in a synchronous way or in a stepwise way. For the latter, the reaction is a multichannel elimination reaction including inner H transfer. The potential energy surface of Path 3 is lowest in all the ring‐closing reaction paths. In addition, H shuttling reaction with the participation of a water molecule to act as a shuttle were also studied at the same level. The calculations indicate that the participation of a water molecule facilitates hydrogen transfer reaction. Our present calculations rationalized all the possible reaction channels. © 2005 Wiley Periodicals, Inc. Int J Quantum Chem, 2005     

Flow-injection spectrofluorometric determination of trace amounts of formaldehyde in water after derivatization with acetoacetanilide

A novel fluorophotometric method for formaldehyde determination in environmental waters was developed: the method does not require any enrichment procedures. A flow-injection analysis method for the spectrofluorometric determination of formaldehyde in waters, which is based on the reaction of formaldehyde with acetoacetanilide and ammonia, is proposed. The proposed method shows a good linearity from 0.50 to 40 × 10⁻⁷ M, and the limit of detection (LOD) of 3 × 10⁻⁹ M (0.09 ppb) is achievable. The sample throughput is 15 h⁻¹. One of the main advantages in the proposed method is that the reaction can be carried out at room temperature without any heating system. The effect of various interferences possibly present in the real water samples was investigated. Most cations and anions, as well as organic compounds, do not interfere with the determination of formaldehyde in environmental water samples. The proposed method is very simple, rapid, less expensive, and highly sensitive, and can be applied to the environmental water samples, such as rain, tap water and river water, at low concentration levels without any enrichment procedure.     

Determination of acetone, 2-butanone, diethyl ketone and BTX using HSCC-UV-IMS

A combination of a custom-designed ion mobility spectrometer (IMS) with a UV ionization source and a high speed capillary column (HSCC) has been developed as an analytical device for the sensitive detection of volatile organic compounds (VOCs), e.g. 2-propanone (acetone), 2-butanone and 3-pentanone (diethyl ketone) in the gas phase. A fast separation of the three selected substances and benzene, toluene and m-xylene (BTX) - all of which occur in human breath - has been achieved within less than four minutes at a carrier gas flow rate of 4.5 mL x min(-1). Multi-dimensional correlations presented support the interpretation of the acquired spectra of mixtures. Method detection limits were 2.7 microg x L(-1) for acetone and 2-butanone and 3.0 microg x L(-1) for diethyl ketone in nitrogen, respectively. The assay linear dynamic range is 4-320 microg x L(-1).     

Aculeoside I, a novel 18,19-seco-ursane saponin isolated from Ilex aculeolata

A novel 18,19-seco-ursane saponin, aculeoside I (1), in addition to four known saponins were isolated from the leaves of Ilex aculeolata Nakai and identified by using spectroscopic and chemical methods. The structure of the new saponin was established as 3,19-dihydroxyl-16,21-epoxy-18,19-seco-13(18)-urs-ene-28-oic-acid-19-O-alpha-L-rhamnopyranosyl-(1 --> 2)-alpha-L-arabinopyranoside.     

ULTRASONICALLY DISPERSED POTASSIUM AS DEPROTONATING AND COUPLING AGENT──SYNTHESIS OF 1，6－DINITRILES IN SITU

ＵＬＴＲＡＳＯＮＩＣＡＬＬＹ　ＤＩＳＰＥＲＳＥＤ　ＰＯＴＡＳＳＩＵＭ　ＡＳ　ＤＥＰＲＯＴＯＮＡＴＩＮＧ　ＡＮＤ　ＣＯＵＰＬＩＮＧ　ＡＧＥＮＴ──ＳＹＮＴＨＥＳＩＳ　ＯＦ　１，６－ＤＩＮＩＴＲＩＬＥＳ　ＩＮ　ＳＩＴＵＵＬＴＲＡＳＯＮＩＣＡＬＬＹＤＩＳＰ...     

pH滴定-主成分回归法同时测定酚类同系物

本文利用pH滴定－主成分回归法同时测定了苯酚、邻苯二酚、邻苯三酚的混合物，结果良好。通过交差验证法，本文还对采样区间和采样间隔作了详细讨论。     

钪—铋—三溴偶氮胂混合多核络合物显色反应及其在钪光度分析中应用研究

本文研究了钪-铋-三溴偶氮胂络合物的共显色反应。实验表明,共显色反应是由于形成混合多核络合物所致。钪络合物最大吸收峰在635nm,表观摩尔吸光系数为7.1×10~4L·mol~(-1)·cm~(-1)。钪在0～5μg/25ml遵守比尔定律。     

2－（5－Br－2－吡啶偶氮－5－二乙氨基）－酚与铑的显色反应的研究及应用

本文研究了２－（－５－Ｂｒ－２吡啶偶氮－５－二乙氨基）－酚与铑（Ⅲ）的显色反应。在ｐＨ为４．０的邻苯二甲酸氢钾缓冲液介质中，Ｒｈ（Ⅲ）与试剂形成稳定的橙红色络合物，其组成比为１：４，最大吸收波长为４９０ｎｍ，表现摩尔吸光系数为１．３×１０￣５Ｌ·ｍｏｌ￣（－１）·ｃｍ￣（－１）。铑含量在０～４μｇ／１０ｍＬ范围内服从比尔定律。