Characterization of heat-assisted magnetic probe recording on CoNi/Pt multilayers

A method of heat-assisted magnetic recording (HAMR) potentially suitable for probe-based storage systems is characterized. In this work, field emission current from a scanning tunneling microscope (STM) tip is used as the heating source. Pulse voltages of 2–7 V were applied to a CoNi/Pt multilayered film fabricated on either bare silicon or oxidized silicon substrates. Different types of Ir/Pt and W STM tips were used in the experiment. The results show that thermally recorded magnetic marks are formed with a nearly uniform mark size of 170 nm on the film fabricated on bare silicon substrate when the pulse voltage is above a threshold voltage. The mark size becomes 260 nm when they are written on the identical film fabricated on an oxidized silicon substrate. The threshold voltage depends on the material work function of the tip, with W having a threshold voltage about 1 V lower than Pt. A synthesized model, which contains the calculation of the emission current, the simulation of heat transfer during heating, and the study of magnetic domain formation, was introduced to explain experimental results. The simulation agrees well with the experiments.     

A search for fractional electric charge in sea water

The magnetic levitation technique has been used to test for fractional electric charge in sea water, using steel balls coated with sea water residue by evaporation. The objective was to reach concentration levels below 1 g^?1 which might result from cosmic ray interactions. Four stages of increasing sensitivity are reported: (1) residue from direct evaporation of unprocessed sea water, (2) residue from sea water samples enriched by ion exchangen, (3) residue reduced by high temperature evaporation, and (4) hypothetical enrichment by dilution and separation of soluble residue. Stages 1–3 are based on the generally accepted preferential retention of fractional charge during evaporation, but stage 4 limits are subject to uncertainties in the enrichment process. No evidence for fractional charge was found in a total of about 130 samples tested in these four stages. Samples containing positive and negative ions were tested separately, and concentration limits are reported for each of the stages. Levels in the region 0.01–0.1g^?1 were reached in stage 3, and 0.001 g^?1 in stage 4.     

An improved linearization strategy for zero-one quadratic programming problems

We present a new linearized model for the zero-one quadratic programming problem, whose size is linear in terms of the number of variables in the original nonlinear problem. Our derivation yields three alternative reformulations, each varying in model size and tightness. We show that our models are at least as tight as the one recently proposed in [7], and examine the theoretical relationship of our models to a standard linearization of the zero-one quadratic programming problem. Finally, we demonstrate the efficacy of solving each of these models on a set of randomly generated test instances.     

Synthesis and polymerization of a new nitrogen‐containing bis‐ortho‐diynylarene monomer

This study focuses on the preparation, characterization, and optical properties of new bis(3,4‐diphenylethynylphenyl)phenylamine. This is the first nitrogen‐containing bis‐ortho‐diynylarene (BODA) monomer having a nitrogen atom as the spacer group. BODA monomers are usually prepared from common bisphenols, thereby providing great synthetic versatility and the opportunity to develop a wide array of novel polyarylene thermosets by varying the aromatic spacer group. The new bis(3,4‐bisphenylethynylphenyl)phenylamine was synthesized in five steps. This compound emits an intense blue color (λ = 438 nm) upon irradiation by UV light and may be suitable for use as an emitting layer in electroluminescent devices. Bis‐(3,4‐bisphenylethynylphenyl)phenylamine and its polymer have photoluminescence quantum yields 34 and 38%, respectively, and long excited‐state lifetimes of 3.2 and 3.6 ns, respectively. The structure of the monomer and its polymer were characterized using spectroscopic techniques including Ultraviolet–visible Spectrophotometer, Photoluminescence Spectrophotometer, Fourier Transform infrared spectroscopy, and Gel Permeation Chromatography. The polymerizations were studied by Differential Scanning Calorimeter. The amount of weight loss and the thermostability of the nitrogen‐containing polymer were determined from thermogravimetric analysis. The electrical conductivity of neat HCl‐doped BODA‐derived polymer film was measured according to the standard four‐point probe technique. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 6988–6996, 2006     

Practical syntheses of [1,3,5]‐triazine dendritic molecules on solid supports

A practical and divergent synthesis of supported [1,3,5]‐triazine dendritic molecules on Wang resin, PEGA resin, SynPhase? Lanterns, and silica gel is described. The alkylamine linkers used allow derivatization with functionality for both synthetic (e.g., supported reagent and scavenger activity) and chemical biology applications. The use of supported intermediates allows differentiation of symmetric linkers without the need for protecting group chemistry. The synthetic route uses inexpensive, readily available starting materials in a straightforward and scaleable strategy. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2248–2259, 2006     

On the multi-attribute stopping problem with general value functions

We examine a sequential selection problem in which a single option must be selected. Each option's value is a function of its attributes, whose precise values can be ascertained at a given cost. We prove the optimality of a threshold stopping rule for a general class of objective functions.