Novel long chain unsaturated diisocyanate from fatty acid: Synthesis,characterization, and application in bio‐based polyurethane

A novel long chain linear unsaturated terminal diisocyanate, 1,16‐diisocyanatohexadec‐8‐ene (HDEDI) was synthesized from oleic acid via Curtius rearrangement. Its chemical structure was identified by FTIR, ¹H NMR, ¹³C NMR, and HRMS. This diisocyanate was used as a starting material for the preparation of entirely bio‐based polyurethanes (PUs) by reacting it with canola diol and canola polyol, respectively. The physical properties and crystalline structure of the PUs prepared from this diisocyanate were compared to their counterparts prepared from similar fatty acid‐derived diisocyanate, 1,7‐heptamethylene diisocyanate (HPMDI). The HDEDI based PUs demonstrated various different properties compared to those of HPMDI based PUs. For example, HDEDI based PUs exhibited a triclinic crystal form; whereas HPMDI based PUs exhibited a hexagonal crystal lattice. In addition, canola polyol‐HDEDI PU demonstrated a higher tensile strength at break than that of canola polyol‐HPMDI, attributed to the higher degree of hydrogen bonding associated with the former sample. Nevertheless, lower Young's modulus and higher elongation in canola polyol‐HDEDI PU were obtained because of the flexibility of the long chain introduced by the HDEDI diisocyanate. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3302–3310, 2010     

Gas chromatographic technique for determination of Irgafos 168 in polyolefin samples after conversion to the related phenolic compound by saponification

A gas chromatographic technique is reported for the determination of a secondary antioxidant, Irgafos 168, in polymeric samples. Irgafos 168 [tris(2,4-di-tert-butyl phenyl)phosphite] is extracted by dissolution/precipitation, saponified to 2,4-di-tert-butyl phenol by refluxing in the presence of methanolic potassium hydroxide, and determined by gas chromatography-flame ionization detection. The method’s repeatability is good, and the relative standard deviation is 7.5% (between runs) and 15.5% (between days). This method was applied to the determination of Irgafos 168 in commercial polymers, and the obtained results were in relatively good agreement with those obtained by the previously reported spectrophotometric method. Correspondence: Mir Ali Farajzadeh, Department of Chemistry, Faculty of Science, Urmia University, Urmia, Iran     

Extended UNIQUAC model for thermodynamic modeling of CO2 absorption in aqueous alkanolamine solutions

The extended UNIQUAC model [K. Thomsen, P. Rasmussen, Chem. Eng. Sci. 54 (1999) 1787–1802] was applied to the thermodynamic representation of carbon dioxide absorption in aqueous monoethanolamine (MEA), methyldiethanolamine (MDEA) and varied strength mixtures of the two alkanolamines (MEA–MDEA). For these systems, altogether 13 interaction model parameters are adjusted. Out of these parameters, 11 are temperature dependent.     

Compatibility of electron ionization and soft ionization methods in gas chromatography/orthogonal time‐of‐flight mass spectrometry

Orthogonal acceleration time‐of‐flight (oa‐TOF) mass spectrometry (MS) was coupled to gas chromatography (GC) to measure ion yields (ratio of ion counts to number of neutrals entering the ion source) and signal‐to‐noise (S/N) in the electron ionization (EI) mode (hard ionization) as well as in the soft ionization modes of chemical ionization (CI), electron capture negative ion chemical ionization (NICI) and field ionization (FI). Mass accuracies of the EI and FI modes were also investigated. Sixteen structurally diverse volatile organic compounds were chosen for this study. The oa‐TOF mass analyzer is highly suited for FI MS and provided an opportunity to compare the sensitivity of this ionization method to the more conventional ionization methods. Compared to the widely used quadrupole mass filter, the oa‐TOF platform offers significantly greater mass accuracy and therefore the possibility of determining the empirical formula of analytes. The findings of this study showed that, for the instrument used, EI generated the most ions with the exception of compounds able to form negative ions readily. Lower ion yields in the FI mode were generally observed but the chromatograms displayed greater S/N and in many cases gave spectra dominated by a molecular ion. Ion counts in CI are limited by the very small apertures required to maintain sufficiently high pressures in the ionization chamber. Mass accuracy for molecular and fragment ions was attainable at close to manufacturer's specifications, thus providing useful information on molecular ions and neutral losses. The data presented also suggests a potentially useful instrumental combination would result if EI and FI spectra could be collected simultaneously or in alternate scans during GC/MS. Copyright © 2009 John Wiley & Sons, Ltd.     

Stereoselective Hydrolysis of Substituted Cyclopropanedicarboxylates with Pig Liver Esterase

The hydrolysis of the meso-cyclopropane-1,2-dicarboxylates 1a - 3a , 4 , 5a , 6a , and 9 , containing various substituents at C(3), and of the rac-3-phenylcyclopropane-1,2-dicarboxylates 7a , 8a , and 10 with pig liver esterase (PLE) is described. The stereoselectivtty and absolute configurations of the products were determined. An interpretation of results was attempted on the basis of a recent active-site model for PLE.     

Diabatic investigation for the NaRb molecule

An extensive diabatic investigation of the NaRb species has been carried out for all excited states up to the ionic limit Na^‐Rb⁺. An ab initio calculation founded on the pseudopotential, core polarization potential operators and full configuration interaction has been used with an efficient diabatization method involving a combination of variational effective hamiltonian theory and an effective overlap matrix. Diabatic potential energy curves and electric dipole moments (permanent and transition) for all the symmetries Σ⁺, Π, and Δ have been studied for the first time. Thanks to a unitary rotation matrix, the examination of the diabatic permanent dipole moment (PDM) has shown the ionic feature clearly seen in the diabatic ¹Σ⁺ potential curves and confirming the high imprint of the Na^‐Rb⁺ ionic state in the adiabatic representation. Diabatic transition dipole moments have also been computed. Real crossings have been shown for the diabatic PDM, locating the avoided crossings between the corresponding adiabatic energy curves.     

An efficient and mild protocol for the synthesis of unsymmetrical ureas in the absence of catalyst and additives

<正>A new practical method for the synthesis of unsymmetrical ureas was achieved by reaction of phenylurea with primary and secondary amines under neutral and mild condition in very good yields.The reaction took place in refluxing dioxane and does not require any catalyst or additives.     

A simple and rapid dispersive liquid-liquid microextraction method followed by GC-FID for determination of N-methylpyrrolidine in cefepime

A simple, rapid and efficient sample preparation technique, dispersive liquid-liquid microextraction, coupled with gas chromatography-flame ionization detection has been developed to determine N-methylpyrrolidine in cefepime. The effect of various experimental factors on the preparation procedure, such as the nature and volume of extraction and disperser solvents, extraction time, the nature of buffer and its pH, and salt effect, was investigated, optimized and the following results were obtained: extraction solvent, chloroform; dispersive solvent and solvent for dissolving cefepime, a mixture of methanol/water (88:12, v/v); salting out agent, NaCl; and buffer, carbonate/bicarbonate (C=0.5?M, pH=12). The optimized conditions were applied to the real sample (cefepime) for the extraction and determination of N-methylpyrrolidine. The calibration graph is linear from 0.02 to 850?mg/L with the square of correlation coefficient 0.999. LOD and LOQ are 6.4 and 21.2?μg/L in solution, respectively, and 0.2 (2×10(-5) ) and 0.6 (6×10(-5) ) μg/g (%, w/w) in cefepime powder, respectively, using sample size 50?mg. Repeatability of the method is good and RSD% for six repeated experiments (C=170?mg/L) is 6.35%.