Calcium-based hydrated minerals: Promising halogen-free flame retardant and fire resistant additives for polyethylene and ethylene vinyl acetate copolymers

In this study, we evaluated the potential flame retardant effect of calcium-based hydrated minerals, such as hydrated lime, partially and completely hydrated dolomitic limes in polyethylene (MDPE) and ethylene vinyl acetate copolymers (EVA) and compared to that obtained with magnesium di-hydroxide (MDH). The most significant flame retardant effects, observed using the mass loss calorimeter test, indicated that Ca-based MDPE composites showed similar peak Heat Release Rate (pHRR) level to that obtained with MDH composite while the pHRR was lower for Ca-based fillers in EVA compositions. X-ray Diffraction (XRD) data, combined with thermal analysis results, indicated that the calcium di-hydroxide plays a role in the formation of an intumescent cohesive residue during the combustion. Indeed, Ca(OH)₂ reacts with CO₂ formed during the thermal degradation of the polymer to generate CaCO₃ (calcium carbonate) that contributes to the enhancement of the mechanical resistance of the residue.     

Mo (CO)6‐assisted Pd‐supported magnetic graphene oxide‐catalyzed carbonylation‐cyclization as an efficient way for the synthesis of 4(3H)‐quinazolinones

In this paper, a novel catalyst is introduced based on the immobilization of palladium on modified magnetic graphene oxide nanoparticles. The catalyst is characterized by several methods, including transmission electron microscopy, scanning electron microscopy, X‐ray fluorescence, vibrating‐sample magnetometer, Fourier transform‐infrared and dynamic light scattering (DLS) analysis. The activity of the catalyst was investigated in the synthesis of 4(3H)‐quinazolinones via Pd‐catalyzed carbonylation‐cyclization of N‐(2‐bromoaryl) benzimidamides by Mo (CO)₆. The Mo (CO)₆ is used as a carbon monoxide source for performing the reaction under mild conditions. The catalyst showed good reusability, and no change in activity was observed after 10 cycles of recovery.     

Decorations of graphene oxide with cisplatin toward investigation of fluorescence quencher on regulatory sequence of BRCA1 and BRCA2

Journal of the Iranian Chemical Society - Herein, we investigated the interaction of cisplatin loaded on GO (GO@CDDP) with two regulatory sequences, BRCA1 and BRCA2, synthesized from ssDNA based on...     

Synthesis of Thio Analogues of Quinolone Antibacterials

A facile and rapid synthesis of thio compounds, analogues to ciprofloxacin, and norfloxacin is described.     

Synthesis of <Emphasis Type="Italic">N</Emphasis>-hydroxy-imidamide-functionalized graphene: an efficient metal-free electrocatalyst for oxygen reduction

Metal-free electrocatalysts for oxygen reduction reaction (ORR) are key to the development of efficient, durable, and low-cost alternatives to noble-metal-based electrocatalysts in fuel cell cathodes. In recent years, many efforts are directed to the metal-free catalyst based on heteroatom-doped graphene. In this work, we demonstrate that the graphene surface can be converted into the catalyst for the oxygen reduction by chemical functionalization. In this context, we first synthesized malononitrile-functionalized graphene oxide. Amidoximation of nitrile group and reduction in graphene oxide were then carried out by hydroxylamine in one step. The electrochemical behavior of functionalized graphene-modified electrode for the reduction in oxygen was studied. The results showed that the electrocatalyst fabricated by this method exhibited striking catalytic activities in alkaline solution. In alkaline solution, this catalyst showed a competitive activity to the commercial Pt catalyst via four-electron transfer pathway with better ORR selectivity and stability. In addition, this metal-free electrocatalyst exhibited tolerance to methanol crossover effect. Based on its outstanding performance, this functionalized graphene electrocatalyst showed the promising prospect of a metal-free catalyst for fuel cell with much lower cost than currently used Pt/C catalyst.     

Synthesis of Some New Triphenylphosphanylidenes,Alkylphosphonates, and Heterocycles of Pyrazole Derivatives and Their Antimicrobial Activity

Abstract

The reaction of 5(4H)-pyrazolone with phosphorus ylides afforded new triphenylphosphanylidene alkanone derivatives. Moreover, its benzylidene derivative reacted with Wittig–Horner reagents to give the corresponding dialkoxyphosphoryl, alkyl phosphonate, and heterocyclic products. Treatment of pyrazole-4-carbaldehyde with Wittig–Horner reagents and trialkyl phosphites gave the respective alkyl phosphonate adducts. Mechanisms accounting for the formation of the new products are discussed. The biological activity of some of the newly synthesized compounds was also examined.     

Kinetic Study of Radical Polymerization v. Determination of Reactivity Ratio in Copolymerization of Acrylonitrile and Itaconic Acid by 1H‐NMR

Many reports exist in the literature about the application of ¹H and ¹³C‐NMR techniques to analyze the copolymer structure and composition and also determination of reactivity ratios. In this work, on‐line ¹H‐NMR spectroscopy has been applied to identify reactivity ratios of itaconic acid and acrylonitrile in the solution phase (DMSO as the solvent) and in the presence of AIBN as the radical initiator. All the peaks corresponding to the existing protons were assigned quietly. Therefore, the kinetics of the copolymerization reaction was investigated by studying the variation of integral of two characteristic peaks regarding each monomer. The obtained data were used to find the reactivity ratios of acrylonitrile and itaconic acid by linear least‐squares methods such as Finemann‐Ross, inverted Finemann‐Ross, Mayo‐Lewis, Kelen‐Tudos, extended Kelen‐Tudos and Mao‐Huglin. In addition, a non‐linear least‐square method (Tidwell‐ Mortimer) was used at low conversions. Extended Kelen‐ Tudos and Mao‐Huglin were applied to determine reactivity ratio values at high conversions as well.     

Synthesis of Novel Organosilicon Compounds Possessing Fully Substituted Imidazole Nucleus Sonocatalyzed by Fe-Cu/ZSM-5 Bimetallic Oxides

An efficient four-component synthesis of 1,2,4,5-tetrasubstituted imidazoles is described by one-step condensation of an aldehyde, benzil, ammonium acetate, and primary aromatic amine with nanostructure Fe-Cu/ZSM-5 bimetallic oxides in water under ultrasonic irradiation. The short reaction time, good yields, environmental friendly procedure, mild reaction conditions, and convenient operation are important advantage of this protocol. The products generated during the study have been utilized as substrates for synthesis of organosilicon-containing imidazoles. Synthesis of tris(triorganosilyl)methylimidazole derivatives were carried out using organolithium reagent (Me₃Si)₃CLi, prepared via metalation of (Me₃Si)₃CH with methyllithium in tetrahydrofuran, in excellent yields.