The chemistry of thujone. VIII. Thujone as a chiral synthon for the synthesis of optically active steroid analogues. The enol lactone route

The thujone-derived enone 1 is converted via enol lactone intermediates 4 and 5 to the optically active steroidal analogue 13 and the corresponding 19-norsteroid analogue 14 . The structure of 13 was determined by X-ray diffraction analysis. The acid-catalyzed cyclopropane-ring opening of 13 and ozonolysis of the resulting olefin provided the 16-keto-steroid analogue 18 .     

Investigation of radical intermediates in polymer sonochemistry

There is current interest in using high-intensity ultrasound to perform a range of chemical transformations, including polymerisation reactions. In this work, the technique of radical trapping, primarily using DPPH, has been used to measure radical production rates in a range of monomer and related systems when exposed to high intensity ultrasound. It has been shown that realistic rates of production can be obtained around room temperature equivalent to thermal decomposition rates > 100°C, making sonication a viable method for initiating polymerisation. Rates of initiation in a twophase organic in water system have also been measured. Some of the initiating species have been identified recording the ESR spectra of adducts with spin traps, although further analysis is needed before the complete range of radicals produced can be identified.     

The effect of silane concentration on the adsorption of poly(vinyl acetate-co-maleate) and γ -methacryloxypropyl- trimethoxysilane onto E-glass fibers

The adsorption of a poly(vinyl acetate-co-maleate) (PVAM) emulsion onto E-glass fibers was investigated along with sizing formulations prepared by mixing the PVAM with varying concentrations of -methacryloxypropyltrimethoxysilane (MPS). The sized E-glass fibers were then characterized using Diffuse Reflectance Infrared Fourier Transform (DRIFT) spectroscopy, X-ray Photoelectron Spectroscopy (XPS) and Scanning Electron Microscopy (SEM). Loss on Ignition (LOI) along with the DRIFT spectra indicated that the addition of silane to the PVAM emulsion caused a decrease in the amount of size on the fiber. The decrease in amount of size on the E-glass fibers did not coincide with a decrease in surface coverage, instead the XPS results indicated surface coverage had increased with silane addition. These results showed that small increases in the silane concentration appear to affect the amount of size adsorbed to the E-glass fibers     

Nonlocal density functional calculation of gas phase heats of formation

A general procedure is presented for computing the gas phase heats of formation of a wide variety of organic compounds. ΔE for the formation of the molecule from its elements at 0 K is obtained from density functional calculations (Gaussian 92/DFT) for optimized geometries. This result is converted to ΔH at 298 K by assuming ideal behavior and adding the translational, rotational, and vibrational energies. Additive correction terms corresponding to the various coordination states of the carbons, nitrogens, and oxygens were developed using a database of 54 compounds. The experimental ΔH values of these compounds are then reproduced with an average absolute error of 3 kcal/mol and a standard deviation of 4 kcal/mol. For a group of 10 test cases that were not part of the database, the average absolute error is 3.5 kcal/mol and the standard deviation is 4.1 kcal/mol. © 1995 by John Wiley & Sons, Inc.     

The effect of selenium incorporation on the bandwidth and conductivity of neutral radical conductors

The first example of an undimerized pi-stacked bis-1,2,3-thiaselenazolyl radical displays improved bandwidth and conductivity relative to an isostructural bis-1,2,3-dithiazolyl.     

Translational energy threshold functions for oxygen atom reactions

The similarities between core and valence Rydberg series observed in inert-gas atoms are explained by the electron density relaxation which extends up to the outer atomic shell, regardless of the localization of the hole.     

Mechanism of ammonia detection by chemically functionalized single-walled carbon nanotubes: in situ electrical and optical study of gas analyte detection

We provide definitive evidence for the mechanism of electronic detection of ammonia by monitoring in situ changes in the electrical resistance and optical spectra of films of poly(m-aminobenzenesulfonic acid)-functionalized SWNTs (SWNT-PABS). The increase of resistance during exposure to ammonia is associated with deprotonation of the PABS side chain that in turn induces electron transfer between the oligomer and the valence band of the semiconducting SWNTs. Near IR spectroscopy is used to demonstrate that the charge transfer is a weakly driven process, and this accounts for the high reversibility of the sensor. We show that the sensitivity of the chemiresistors increases as the film thickness is reduced to the percolation threshold and that the SWNT-PABS film thickness provides a simple means to enhance the electronic response.     

δD and δ13C analyses of atmospheric volatile organic compounds by thermal desorption gas chromatography isotope ratio mass spectrometry

This paper describes the establishment of a robust method to determine compound specific δD and δ(13)C values of volatile organic compounds (VOCs) in a standard mixture ranging between C(6) and C(10) and was applied to various complex emission samples, e.g. from biomass combustion and car exhaust. A thermal desorption (TD) unit was linked to a gas chromatography isotope ratio mass spectrometer (GC-irMS) to enable compound specific isotope analysis (CSIA) of gaseous samples. TenaxTA was used as an adsorbent material in stainless steel TD tubes. We determined instrument settings to achieve a minimal water background level for reliable δD analysis and investigated the impact of storage time on δD and δ(13)C values of collected VOCs (176 days and 40 days of storage, respectively). Most of the standard compounds investigated showed standard deviations (SD)<6‰ (δD) when stored for 148 days at 4 °C. However, benzene revealed occasionally D depleted values (21‰ SD) for unknown reasons. δ(13)C analysis demonstrated that storage of 40 days had no effect on VOCs investigated. We also showed that breakthrough (benzene and toluene, 37% and 7%, respectively) had only a negligible effect (0.7‰ and 0.4‰, respectively) on δ(13)C values of VOCs on the sample tube. We established that the sample portion collected at the split flow effluent of the TD unit can be used as a replicate sample for isotope analysis saving valuable sampling time and resources. We also applied TD-GC-irMS to different emission samples (biomass combustion, petrol and diesel car engines exhaust) and for the first time δD values of atmospheric VOCs in the above range are reported. Significant differences in δD of up to 130‰ were observed between VOCs in emissions from petrol car engine exhaust and biomass combustion (Karri tree). However, diesel car emissions showed a high content of highly complex unresolved mixtures thus a baseline separation of VOCs was not achieved for stable hydrogen isotope analysis. The ability to analyse δD by TD-GC-irMS complements the characterisation of atmospheric VOCs and is maybe used for establishing further source(s).     

Water exchange reactivity and stability of cobalt polyoxometalates under catalytically relevant pH conditions: insight into water oxidation catalysis

Water exchange on a molecular, purely inorganic cobalt-based water oxidation catalyst, [Co(4)(II)(H(2)O)(2)(α-P(1)W(9)O(34))(2)](10-) (1), in the catalytically relevant pH region (pH 6-10) is studied using (17)O-NMR spectroscopy and ultrahigh-resolution electrospray ionization mass spectrometry. The results are compared with those of the inactive [Co(II)(H(2)O)(1)Si(1)W(11)O(39)](6-) (2), which is stable in the same pH region. The results obtained provide mechanistic details of the elementary reaction step related to the water oxidation on homogeneous metal oxide catalysts under catalytically relevant conditions. It is shown that the structural integrity of 1 and 2 is maintained, no deprotonation of the aqua ligands on the Co(II) centers occurs, and the water exchange does not undergo any mechanistic changeover at the catalytic pH conditions. We have demonstrated that the water exchange process is influenced by the cluster environment surrounding the water binding sites and is fast enough to not be rate-limiting for the water oxidation catalysis.     

Tuning the Photoisomerization of a N^C‐Chelate Organoboron Compound with a Metal?Acetylide Unit

To examine the impact of metal moieties that have different triplet energies on the photoisomerization of B(ppy)Mes₂ compounds (ppy=2‐phenyl pyridine, Mes=mesityl), three metal‐functionalized B(ppy)Mes₂ compounds, Re‐B , Au‐B , and Pt‐B , have been synthesized and fully characterized. The metal moieties in these three compounds are Re(CO)₃(tert‐Bu₂bpy)(C?C), Au(PPh₃)(C?C), and trans‐Pt(PPh₃)₂(C?C)₂, respectively, which are connected to the ppy chelate through the alkyne linker. Our investigation has established that the Re^I unit completely quenches the photoisomerization of the boron unit because of a low‐lying intraligand charge transfer/MLCT triplet state. The Au^I unit, albeit with a triplet energy that is much higher than that of B(ppy)Mes₂, upon conjugation with the ppy chelate unit, substantially increases the contribution of the π→π* transition, localized on the conjugated chelate backbone in the lowest triplet state, thereby leading to a decrease in the photoisomerization quantum efficiency (QE) of the boron chromophore when excited at 365 nm. At higher excitation energies, the photoisomerization QE of Au‐B is comparable to that of the silyl–alkyne‐functionalized B(ppy)Mes₂ ( TIPS‐B ), which was attributable to a triplet‐state‐sensitization effect by the Au^I unit. The Pt^II unit links two B(ppy)Mes₂ together in Pt‐B , thereby extending the π‐conjugation through both chelate backbones and leading to a very low QE of the photoisomerization. In addition, only one boron unit in Pt‐B undergoes photoisomerization. The isomerization of the second boron unit is quenched by an intramolecular energy transfer of the excitation energy to the low‐energy absorption band of the isomerized boron unit. TD‐DFT computations and spectroscopic studies of the three metal‐containing boron compounds confirm that the photoisomerization of the B(ppy)Mes₂ chromophore proceeds through a triplet photoactive state and that metal units with suitable triplet energies can be used to tune this system.