Dissociation and solubility variation versus pO2- of scheelite CaWO4 in molten NaCl−KCl (At 1000 K)

The conditional solubility of scheelite CaWO₄ in molten NaCl?KCl (1:1) has been studied either in oxobasic or oxoacidic media. In the former case it is increased by formation of sparingly soluble CaO according to:Ca²⁺ + O²CaO(s), pK_s^CaO = 10800/T ? 5.8 (molality scale) In the later case, WO₄^2- behaves as an oxobase according to the following equilibria:WO₄^2?WO₃ (s) + O^2? pK₀ = 10.0 at 1000 K3 WO₄^2?W3O₁₀^2? pK₃ = 12.7 at 1000KThe latter equilibrium favours an increase in the W^VI solubility when pO^2- is increased, for instance by injection of HCl. The whole set of results has been summarized by a conditional solubility diagram of scheelite versus pO^2-.     

Highly stereoselective synthesis, structure, and application of (E)-9-[2-(silyl)ethenyl]-9H-carbazoles

(E)-N-(Silyl)vinylcarbazole has been easily prepared via a new catalytic route, silylative coupling (SC) of vinylcarbazole with vinyltrisubstituted silanes catalyzed by [RuH(Cl)(CO)(PCy3)2]. X-ray structures of two silylvinylcarbazoles as first N-vinylcarbazole derivatives have been resolved. The Pd-catalyzed Hiyama coupling reaction (also as the tandem reaction with SC) of synthesized (E)-N-(triethoxysilyl)vinylcarbazole with iodobenzene has been performed to afford (E)-N-(phenylvinyl)carbazole with high yield and stereoselectivity.     

Synthesis of donor-acceptor alkynylcyclopropanes by diastereoselective cyclopropanation of electron-deficient alkenes with alkoxyalkynyl Fischer carbene complexes

The reaction of electron-deficient alkenes with alkoxyalkynyl Fischer carbene complexes (FCCs) represents a straightforward route to a new type of captodative (donor-acceptor) alkynylcyclopropanes, which have been prepared in moderate to high yields and in a diastereoselective manner. Some studies regarding the employment of additives to facilitate the recovery of the metal moiety after the reaction are also described. Finally, the first example of a cyclopropanation reaction through employing Fischer carbene complexes under microwave irradiation is presented; this method proved to be an advantageous alternative to the thermal reaction.     

The key elements of traceability in chemical measurement: agreed or still under debate?

Talking about "traceability" means talking about a "property of the result of a measurement", about "the value of a standard", about "stated references" and about an "unbroken chain of comparisons". It describes by which comparison, and to which other value, the result of a measurement has been obtained, i.e. is "traceable to". It is about the underlying structure of the measurement process of the result of a measurement and therefore about the authority of the result. Since values carried by (certified) reference materials have also been obtained by measurement, the definition of traceability equally applies. Traceability in the context of reference materials is also about the authority of the values carried by the (certified) reference materials and is, therefore, of key importance for the authority of the reference materials themselves. Hence, values of results of measurements constitute part of the traceability chain and their uncertainties are an intrinsic accompanying phenomenon. Uncertainties need a traceability chain against which they can be evaluated, and a traceability chain is an a priori requirement for evaluating the uncertainty budget of a measurement result. An attempt has been made to exemplify "traceability" chains in some types of chemical measurement and to identify the degree of international agreement on the key elements of "traceability". It is concluded that there is less than universal agreement on this issue. The debate should continue in order to arrive at the international understanding and agreement needed, as "traceability" is now being incorporated in the International Organization for Standardization (ISO), the International Laboratory Accreditation Co-operation (ILAC) and in other "guiding" or regulatory documents. It is also the reason why the Institute for Reference Materials and Measurements (IRMM) has taken up the study of the concept in its core programme on Metrology in Chemistry, and why it sponsored the Workshop in Bratislava.     

Synthesis of tetrahydroimidazo[1,5-b]-β-carboline derivatives with complex basic substituents

Novel tetrahydroimidazo[1,5-b]-β-carbolines derivatives 6 bearing complex basic chains as substituents on the imidic nitrogen have been prepared in a one-pot reaction. This simple experimental procedure overcomes the direct handle of isocyanates which can be favorably generated “in situ” from carbonyldiimidazole (CDI) and different amines. The stereochemistry of the novel compounds was determined by nmr experiments.     

Excess molar volumes and excess viscosities for then-hexane+dichloromethane+tetrahydrofuran ternary system at 25°C

Exces molar volumes, and excess viscosities of then-hexane+dichloromethane+tetrahydrofuran system have been determined at 25°C by measuring densities and viscosities. Different expressions exist in the literature to predict these excess properties from binary data. The empirical correlation of Cibulka is shown to be the best in this system.     

Additivity Factors in the Binding of the Diethyltin(IV) Cation by Ligands Containing Amino and Carboxylic Groups at Different Ionic Strengths

Complex formation constants were determined potentiometrically (by a ISE-H⁺, glass electrode) in the systems, M²⁺ – L^z – H⁺ [M²⁺ = (C₂H₅)₂Sn²⁺, L^z = malonate, glycinate and ethylenediamine] at t = 25 ^∘C and 0.1 mol-L⁻¹≤ I/ ≤ 1 mol-L⁻¹ in NaCl_aq (0.1 mol-L⁻¹ ≤ I ≤ 0.75 mol-L⁻¹ for the ethylenediamine system). Thermodynamic values of formation constants, at infinite dilution, are [± 95% confidence interval, ^Tβ_pqr refer to the equilibrium, pM²⁺ + qL^z + rH⁺ = M_pL_qH_r^(2+z+r)]: for malonate, log₁₀ ^Tβ₁₁₀ = (5.47 ± 0.10); for glycinate, log₁₀ ^Tβ₁₁₀ = (9.54 ± 0.08), log₁₀ ^Tβ₁₁₁ = (12.97 ± 0.10); and for ethylenediamine, log₁₀ ^Tβ₁₁₀ = (10.47 ± 0.10), log₁₀ ^Tβ₁₂₀ = (16.17 ± 0.12) and log₁₀ ^Tβ₁₁₁ = (15.46 ± 0.10). The dependence on ionic strength of the formation constants was modeled by a simple Debye–Hückel type equation and by the SIT approach. By analyzing the stability of the species in the three different systems we found a simple additivity rule that can be expressed by the relationship: log₁₀ K = 6.46 n_N + 3.96 n_O − 0.60 (n_N²+ n_O²), with a mean deviation, ε(log₁₀ K) = 0.15 (K = equilibrium constant for the interaction of the organometal cation with the unprotonated or protonated ligand, n_N = number of amino groups and n_O = number of carboxylic groups of the ligand(s) involved in the formation reaction of complex species).     

Natural radionuclide-free phosphoric acid production

High-uranium phosphate rock from Itataia, Brazil, was milled for wet-process phosphoric acid production using the dihydrate method. Uranium contained in the phosphoric acid was recovered by solvent extraction. The distribution of long-lived natural radionuclides of the ²³⁸U and ²³²Th decay series involved in these operations was evaluated. ²²⁶Ra, ²²⁸Ra and ²¹⁰Pb were found to predominate in the phosphogypsum, while ²²⁸Th, ²³⁰Th and ²³²Th in the uranium-free phosphoric acid. Thorium is removed from the phosphoric acid by solvent extraction to produce a NORM-free phosphoric acid.     

The influence of the brewing process on the formation of biogenic amines in beers

Biogenic amines, as dabsyl derivatives, were determined in beer samples, intermediate products, and raw materials (malt and maize) by HPLC. A procedure for the extraction of the amines from malt and maize with diluted hydrochloric acid was optimised by combining a Response Surface Methodology with a Simultaneous Decision Making Approach. The results of the analysis indicate that, in brewing, technology and hygiene are the decisive factors that determine the amine concentrations in the final product.     

Laser-Induced fluorescence detection in conventional-size liquid chromatography with a frequency-doubled argon-ion laser

Laser-induced fluorescence (LIF) detection in conventional-size column liquid chromatography is achieved at 257 nm with a frequency-doubled argon-ion laser. Short-wavelength excitation offers two important advantages: firstly, a wide variety of analytes can be excited, and secondly, the Raman scatter of the eluent does not interfere with the fluorescence of the analytes. A standard mixture of polynuclear aromatic hydrocarbons was studied, both with LIF detection and with a commercially available sensitive conventional fluorescence detector. The improvement in the detection limits ranges from about a factory of 4 to 30; the LIF detection limits are typically at the 50 ng l^?1 level, which corresponds to an injected amount of 0.5 pg.