Volume and heat capacity of model non-aqueous self-assembly systems

Blends of immiscible polymers are often stabilized by block copolymers which can form non-aqueous micelles and microemulsions in the liquid polymers. The phase diagrans, apparent volumes and apparent heat capacities of model non-aqueous binary and ternary systems were studied in order to investigate the conditions under which such self-assembly systems could form. 1,2-Hexanediol, which can cosolubilize hexane and ethyleneglycol, forms inverse micelles in hexane and weak microaggregates in ethyleneglycol. Genapol X-060, a commercial alcoholic surfactant containing on the average an aliphatic chain of 13 carbons and 6 oxyethylenes (C₁₃E₆), forms microaggregates in poly(ethyleneglycol) 400. These self-assembly systems are strengthen in the presence of a third component which has an affinity for the inner phase.Presented at the Symposium, 76^th CSC Congress, Sherbrooke, Quebec, May 30–June 3, 1993, honoring Professor Donald Patterson on the occasion of his 65^th birthday.     

Form fluctuations of carbosilane dendrimers in dilute solution: a study using neutron spin echo spectroscopy

A series of carbosilane dendrimers with perfluorinated end groups has been prepared. The structure of these molecules in dilute solution is studied using small angle neutron scattering. For generations g<3 we find a non-spherical shape of the particles and a tendency for aggregation. This result is supported by the analysis of the diffusion coefficient obtained from photon correlation spectroscopy. The overall shape of the molecules is that of a core-shell particle. The generation 4 molecule is obtained as a compact sphere. Neutron spin echo spectroscopy reveals a relaxation time which is attributed to the form fluctuations of this particle.     

The influence of cosolvent polarity on the flow properties of hydroalcoholic gels: empirical models

The aim of this study was to investigate the influence of cosolvent polarity on the rheological flow properties of aqueous and hydroalcoholic gels obtained from the Carbopol Ultrez 10 base and used for topical applications. Specifically, we have examined the effect of pH (range 4.0--7.0) on the consistency and flow properties of dispersed systems in water and mixtures--15 : 85% v/v of methanol : water, ethanol : water, n-propanol : water and n-butanol : water--at a constant polymer concentration of 0.3% w/w. The gels, which had decreasing polarity values in the jellifying medium, showed qualitatively similar flow behavior, characteristic of pseudoplastic systems, and all of the flow curves were adjusted to the Ostwald model. Sigmoidal dose response functions were calculated to describe the flow and consistency indexes as a function of pH. As a result, the influence of alcohol polarity on the polymer network has been assessed meaningfully using the empirical parameters obtained: maximum consistency index value (k(max)), pH value required for 50% development of polymer network (pH(50)), and asymptotic flow index value (n(min)) for the fully structured gels.     

Droplet evaporation study applied to DNA chip manufacturing

DNA chips are potentially powerful technologies for genotyping and gene expression profiling that rely on comparative analyses of up to thousands of "spots of analysis" on a glass support. The spot quality throughout the support influences spot-to-spot variations within an array and the repeatability of data across experiments. For glass slide DNA microarrays, droplets of DNA solution are deposited on functionalized glass slides and left to react through complete evaporation of the droplet. On hydrophobic flat surfaces, different modes of droplet evaporation can be attained. Under atmospheric pressure, water droplets tend to evaporate under two main regimes. Initially, the droplet flattens with a constant contact area, and then the droplet shrinks at a constant contact angle. As a result, the diameter and morphology of thousands of spots on microarrays are not uniform. This leads to poor and unreliable data processing results. In this work, we report the evaporation of an aqueous solution under a constant contact area mode. Evaporation under reduced pressure and the effect of reagent additives to the solution have been investigated. Video microscopy and digital image analysis techniques were applied to monitor the evaporation of the droplets. A mixture of surfactants was developed to maintain a constant area regime during evaporation and to form homogeneous spots. The control of some physicochemical properties (wetting, evaporation rate) of the droplet allows the formation of well-controlled spots compatible with DNA grafting. The influence of surfactant molecules on the mechanisms of evaporation is also discussed.     

Dynamics and energetics of the self-assembly of a hydrophobically modified polyelectrolyte: Naphthalene-labeled poly(acrylic acid)

Steady-state and time-resolved fluorescence studies were performed on aqueous solutions of poly(acrylic acid) hydrophobically modified with two very different levels of naphthalene (Np). It is demonstrated that unique information on association phenomena involving hydrophobe-modifed polymers can be obtained from an extended fluorescence study by using data for a less-modified polymer as a reference. For the more highly modified polymer, the presence of excited-state (as well as ground-state) dimers in addition to monomer emission due to locally excited naphthalene gives evidence for hydrophobic association between naphthalene groups. This association becomes, as expected, much less important at higher pH due to the electrostatic repulsion between different chain segments. However, it is noted that even at high pH there is a significant self-association. The coexistence of static and dynamic quenching phenomena of the Np monomer label was also revealed in the time-resolved fluorescence data. The data are compatible with the existence of two types of monomers and one excimer and suggest that the essential contribution to the monomer emission comes from isolated chromophores, whereas excimer formation arises from both a dynamic route (excited Np chromophores able to produce a dynamic excimer) and a static route (excitation of ground-state Np dimers). At room temperature, the dissociative reaction, excimer-to-monomer, can be neglected, and thus the rate constant for excimer formation and decay could be obtained with and without considering the influence of preformed dimers. Temperature has shown to induce different behavior in the polymer photophysics. In the case of the less-labeled polymer, the decays were found to be single-exponential with the fluorescence lifetime decreasing with increasing temperature. From the temperature dependence of the steady-state fluorescence data, the activation energy for excimer formation and the binding energy of the excimer were evaluated at different pH values, through the Stevens-Ban-type plots of the excimer-to-monomer intensity ratio. With the time-resolved data, measured in the temperature range of 5-60 degrees C, it was possible to extract the intrinsic activation energies for excimer formation. The thermodynamic driving force for the intrapolymeric association was found to be dependent on a balance between hydrophobic and electrostatic interactions, which are dependent on the pH, temperature, and hydrophobic content of the polymer.     

Influence of the coordination number of nitrogen on the structure of 6aλ4-thia-1,3,4,6-tetraazapentalenic systems. Crystal structure analyses of 3-(2-pyridylimino)-3H-[1,2,4]thiadiazolo[4,3-a]pyridine and its 1-methylated salt

Structural data were obtained by X-ray crystallography for the title compounds which show that they are essentially planar and exhibit an approximately linear N2-S1-N8 arrangement. In compound 3 the separation between the sulfur atom and the pyridine nitrogen atom (2.61 Å) is larger than the Huggins constant energy distance (2.58 Å), suggesting that there is little or no bonding between them. The methylated salt 4 , on the contrary, has a closer S…N(pyridine) distance (2.19 Å) with an estimated bond dissociation energy of 6 kcal/mole.     

Influence of a silyl group on an allylic position. A theoretical approach

Allylsilanes show in certain cases a behaviour towards electrophiles which is opposite to that of its carbon homologues. Theoretical calculations using Dewar's MINDO/3 method performed on 3-methyl 3-butenyl trimethylsilane and 2-methyl 2-butene show that geometrical optimization leads to a silicon-allylic carbon bond nearly parallel to the double bond π cloud, and both net atomic charges and HOMO coefficients indicate an inversion between these two substrates.     

Hydrogenation homogene catalysee par les composes de coordination des platinoides : I. Proprietes catalytiques de derives organometalliques de l'iridium

The definition is stated for a catalytic test working at constant total pressure. The hydrogenation of 1-hexene has been studied with organoiridium compounds as catalysts. Of the derivatives [IrCl(cod)PR₃], the compound with PR₃ = tricyclohexylphosphine (PCy₃) has shown an activity and a selectivity superior to those of previously known catalysts.Two kinetic domains are found according to the temperature. Above ?10°C, the reaction is first order in hydrogen, one-third order in catalyst and zero order in 1-hexane. Below ?10°C it is first order in hydrogen, one-half order in catalyst and one-third order in 1-hexane.The optimum ratio PCy₃/Ir is 1 instead of 2, the value commonly found for other phosphine ligands.Other interesting catalysts containing acetato ligands are described.     

Electrophoretically mediated microanalysis with partial filling technique and indirect or direct detection as a tool for inhibition studies of enzymatic reaction

The inhibition of the model enzyme, haloalkane dehalogenase from Sphingomonas paucimobilis, was investigated by a combination of electrophoretically mediated microanalysis with a partial filling technique, followed by indirect or direct detection. In this setup, part of the capillary is filled with a buffer suitable for the enzymatic reaction (20 mM glycine buffer, pH 8.6) whereas the rest of the capillary is filled with the background electrolyte optimal for separation of substrates and products. Two different background electrolytes and corresponding detection approaches were used to show the versatility of the developed method. The inhibition effect of 1,2-dichloroethane on the dehalogenation of brominated substrate 1-bromobutane was studied by means of 10 mM chromate - 0.1 mM cetyltrimethylammonium bromide (pH 9.2) in combination with indirect detection or 20 mM beta-alanine - hydrochloric acid (pH 3.5) in combination with direct detection. The method was used to estimate the inhibition constant K(I) (0.44 mM by indirect detection and 0.63 mM by of direct detection) and to determine the inhibition type. Compared to spectrophotometric and other discontinuous assays, the method is rapid, can be automated, and requires only small amount of reagents that is especially important in the case of enzymes and inhibitors.