Structure and reflective properties of Al-Cu-Fe quasicrystalline thin film prepared by laser induced arc method

Al-Cu-Fe thin films were prepared by laser induced arc (laser-arc) method from a single source-Al63Cu25Fe12 alloy, which was proved to consist of quasicrystalline phase together with approximant phase. The composition of the deposited films meets the requirement for formation of icosahedral symmetry phase. Quasicrystalline phase was obtained after annealing the amorphous as-deposit film samples. The optical properties of the samples were investigated. Thin film samples of Al, Cu and Fe deposited under the same condition were employed for comparison. The results showed specific reflective properties of Al-Cu-Fe quasicrystal thin film in some wavelength range. The optical conductivity of the films exhibited a negative peak, centered about 440 nm in range of 190to 800 nm. The Al-Cu-Fe quasicrystal thin films could absorb almost all the ray in the wavelength range from 420nm to 450 nm. The ratio of absorption was greater than 99%.     

THE PREPARATION AND STABILITY OF COLLOIDAL METAL DISPERSIONS PREPARED BY A TWO-PHASE NON-AQUEOUS ROUTE

Stable suspensions of small metal Au, Ru, PI, Pd, Rh, Co and Nl particles dispersed in n-heptane and n-dodecane have been prepared using a novel two-phase system, Involving the formation of the particles In a methanolic phase and subsequent phase transfer of the panicles to the alkane medium. The dispersions consisted of small particles having diameters In the range of 8-30 nm (the gold sols were very polydlsperse having average diameters of ca.34 nm). The phase transfer of the particles and their subsequent colloid stability were effected by the presence of dissolved dispersant in the hydrocarbon phase (either Oloa 1200 or Hypermer LP 8). In the case of Oloa 1200, a widely-used polylsobutylene succinimide automotive engine dispersant, It Is proposed that the amlne groups adsorb strongly to the acidic surface o1 the particles, and the 70-carbon polyisobutylene chains extend Into the hydrocarbon medium sufficiently to maintain the separation of adjacent particles by steric and possibly also by electrical repulsion.     

Gd(1.33)Pt(3)(Al,Si)(8) and Gd(0.67)Pt(2)(Al,Si)(5): two structures containing a disordered Gd/Al layer grown in liquid aluminum

Gd(1.33)Pt(3)Al(8) was synthesized by the combination of Gd and Pt in excess liquid aluminum. Addition of silicon resulted in the incorporation of a small amount of this element into the material to form the isostructural Gd(1.33)Pt(3)Al(7)Si. Both compounds grow as rodlike crystals with hexagonal cross section. The structures were refined in the rhombohedral space group R(-)3m, with cell parameters a = 4.3359(6) A and c = 38.702(8) A for the ternary and a = 4.3280(8) A and c = 38.62(1) A for the quaternary compound. The structure is comprised of stuffed arsenic-like PtAl(2) layers and disordered Gd/Al layers. Analysis of the hk0 zone reflections indicate the presence of an a = radical 3a supercell, but the structure is not ordered along c, as revealed by the highly diffuse reflections in the 0kl zone photos. Therefore, the compounds are disordered variants of the Gd(4)Pt(9)Al(24) type. Magnetic susceptibility studies reveal antiferromagnetic transitions at 15 K for the ternary and 7 K for the quaternary compound. Variation of the reactant ratio produces a different structure comprised of the same structural blocks, including the disordered Gd/Al layer. Gd(0.67)Pt(2)Al(5) and its quaternary analogue Gd(0.67)Pt(2)Al(4)Si form in the hexagonal system P6(3)/mmc with cell parameters a = 4.2907(3) A and c = 16.388(2) A for the ternary and a = 4.2485(6) A and c = 16.156(3) A for the quaternary compound.     

Formation of multinary intermetallics from reduction of perovskites by aluminum flux: M(3)Au(6+)(x)()Al(26)Ti (M = Ca, Sr, Yb), a stuffed variant of the BaHg(11) type

New intermetallic phases were synthesized by reacting oxidic perovskites and gold metal in aluminum flux. The combination of MTiO(3) (M = Ca, Sr, Ba) and Au metal in excess molten aluminum produces quaternary compounds M(3)Au(6+)(x)()Al(26)Ti with a stuffed BaHg(11) structure type. An analogue with M = Yb was also synthesized; it shows mixed valent behavior.     

A tale of two metals: new cerium iron borocarbide intermetallics grown from rare-earth/transition metal eutectic fluxes

R(33)Fe(14-x)Al(x+y)B(25-y)C(34) (R = La or Ce; x ≤ 0.9; y ≤ 0.2) and R(33)Fe(13-x)Al(x)B(18)C(34) (R = Ce or Pr; x < 0.1) were synthesized from reactions of iron with boron, carbon, and aluminum in R-T eutectic fluxes (T = Fe, Co, or Ni). These phases crystallize in the cubic space group Im3m (a = 14.617(1) ?, Z = 2, R(1) = 0.0155 for Ce(33)Fe(13.1)Al(1.1)B(24.8)C(34), and a = 14.246(8) ?, Z = 2, R(1) = 0.0142 for Ce(33)Fe(13)B(18)C(34)). Their structures can be described as body-centered cubic arrays of large Fe(13) or Fe(14) clusters which are capped by borocarbide chains and surrounded by rare earth cations. The magnetic behavior of the cerium-containing analogs is complicated by the possibility of two valence states for cerium and possible presence of magnetic moments on the iron sites. Temperature-dependent magnetic susceptibility measurements and M?ssbauer data show that the boron-centered Fe(14) clusters in Ce(33)Fe(14-x)Al(x+y)B(25-y)C(34) are not magnetic. X-ray photoelectron spectroscopy data indicate that the cerium is trivalent at room temperature, but the temperature dependence of the resistivity and the magnetic susceptibility data suggest Ce(3+/4+) valence fluctuation beginning at 120 K. Bond length analysis and XPS studies of Ce(33)Fe(13)B(18)C(34) indicate the cerium in this phase is tetravalent, and the observed magnetic ordering at T(C) = 180 K is due to magnetic moments on the Fe(13) clusters.