The Vibrational Behavior of Coupled Bladed Disks with Variable Rotational Speed

Low pressure steam turbine blades are subjected to high static and dynamic loads during operation. These loads strongly depend on the turbine's rotational speed, leading to entirely new load conditions. To avoid high dynamic stresses due to the forced vibrations, a coupling of the blades, such as shrouds or snubber coupling, is applied to reinforce the structure. In this work the influence of the rotational speed on the vibration behavior of shrouded blades is investigated. Two fundamental phenomena are considered: the stress stiffening and the spin softening effect. Both effects are caused by centrifugal forces and affect the structural mechanical properties, i.e. the stiffness matrix K , of the rotating system. Since the rotational speed Ω appears quadratically, it is possible to derive the stiffness matrix as a second order matrix polynomial in Ω² [3]. In the case of shrouded blades, contact forces between neighboring blades must be taken into account. The contact status and the pressure distribution in particular is strongly influenced by the rotational speed, respectively, centrifugal forces, caused by the untwisting and radial deformation of the blades. For the calculation, a three dimensional structural mechanical model including a spatial contact model is considered. The solution of the nonlinear equations of motion is based on the well known Multiharmonic Balance Method [2]. Here, the nonlinear forces are computed in the time domain and transferred in the frequency domain by the use of the Fast Fourier Transformation (FFT), also known as the Alternating Frequency Time method (AFT) [1]. (© 2015 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim)     

Comprehensive Characterization of Shredded Lithium-Ion Battery Recycling Material

Herein we report on an analytical study of dry-shredded lithium-ion battery (LIB) materials with unknown composition. Samples from an industrial recycling process were analyzed concerning the elemental composition and (organic) compound speciation. Deep understanding of the base material for LIB recycling was obtained by identification and analysis of transition metal stoichiometry, current collector metals, base electrolyte and electrolyte additive residues, aging marker molecules and polymer binder fingerprints. For reversed engineering purposes, the main electrode and electrolyte chemistries were traced back to pristine materials. Furthermore, possible lifetime application and accompanied aging was evaluated based on target analysis on characteristic molecules described in literature. With this, the reported analytics provided precious information for value estimation of the undefined spent batteries and enabled tailored recycling process deliberations. The comprehensive feedstock characterization shown in this work paves the way for targeted process control in LIB recycling processes.     

Reactions of a Four-Membered Borete with Carbon,Silicon, and Gallium Donor Ligands: Fused and Spiro-Type Boracycles

Donor-acceptor cyclopropanes or cyclobutanes are dipolar reagents, which are widely used in the synthesis of complex organic (hetero)cycles in ring expansion reactions. Applying this concept to boron containing heterocycles, the four-membered borete cyclo-iPr₂N-BC₁₀H₆ reacted with the carbon donor ligands 2,6-xylylisonitrile and the carbene IMes :C(NMesCH)₂ with ring expansion and ring fusion, respectively. In particular, the tetracyclic structure formed with IMes displays zwitterionic character and absorption in the visible region. In contrast to the carbene IMes, the heavier carbenoids :Si(NDippCH)₂ and :Ga(AmIm) with a two-coordinate donor atom afford spiro-type bicyclic compounds, which display four-coordinate geometry at silicon or gallium. (TD-)DFT calculations provide deeper insight into the mechanism of formation and the absorption properties of these new compounds.     

Asymmetric Organocatalytic Homologation: Access to Diverse Chiral Trifluoromethyl Organoboron Species

A broad range of aliphatic, aromatic, and heterocyclic boronic acids were successfully homologated using trifluorodiazoethane in the presence of BINOL derivatives to provide the corresponding chiral trifluoromethyl containing boronic acid derivatives in high yields and excellent enantioselectivity. The in situ conversion of the chiral transient boronic acids to the corresponding alcohols or β-CF3 carboxylates are also demonstrated.     

Germaborenes: Borylene Transfer Agents for the Synthesis of Iminoboranes

Halide and phenyl substituted germaborenes were shown to react with azides at room temperature and transfer a borylene moiety to give iminoboranes. This iminoborane synthesis based on a borylene transfer route was investigated computationally in the case of the phenyl substituted germaborene.     

Phosphine-Stabilized Pnictinidenes

The reaction of the intramolecular germylene-phosphine Lewis pair (o-PPh₂)C₆H₄GeAr* ( 1 ) with Group 15 element trichlorides ECl₃ (E=P, As, Sb) was investigated. After oxidative addition, the resulting compounds (o-PPh₂)C₆H₄(Ar*)Ge(Cl)ECl₂ ( 2 : E=P, 3 : E=As, 4 : E=Sb) were reduced by using sodium metal or LiHBEt₃. The molecular structures of the phosphine-stabilized phosphinidene (o-PPh₂)C₆H₄(Ar*)Ge(Cl)P ( 5 ), arsinidene (o-PPh₂)C₆H₄(Ar*)Ge(Cl)As ( 6 ) and stibinidene (o-PPh₂)C₆H₄(Ar*)Ge(Cl)Sb ( 7 ) are presented; they feature a two-coordinate low-valent Group 15 element. After chloride abstraction, a cyclic germaphosphene [(o-PPh₂)C₆H₄(Ar*)GeP] [B(C₆H₃(CF₃)₂)₄] ( 8 ) was isolated. The ³¹P NMR data of the germaphosphene were compared with literature examples and analyzed by quantum chemical calculations. The phosphinidene was treated with [iBu₂AlH]₂, and the product of an Al−H addition to the low-valent phosphorus atom (o-PPh₂)C₆H₄(Ar*)Ge(H)P(H)Al(C₄H₉)₂ ( 9 ) was characterized.     

Cation-Induced Stabilization of Protein Complexes in the Gas Phase: Mechanistic Insights From Hemoglobin Dissociation Studies

Collision-induced dissociation (CID) of electrosprayed protein complexes usually involves asymmetric charge partitioning, where a single unfolded chain gets ejected that carries a disproportionately large fraction of charge. Using hemoglobin (Hb) tetramers as model system, we confirm earlier reports that bound metal ions can stabilize protein complexes under CID conditions. We examine the mechanism underlying this effect. Nonvolatile salts cause extensive adduct formation. Significant stabilization was observed for Mg²⁺ and Ca²⁺, whereas K⁺, Rb⁺, and Cs⁺ had no effect. Precursor ion selection was used to examine Hb subpopulations with well-defined metal binding levels. K⁺, Rb⁺, and Cs⁺-adducted tetramers eject monomers that carry roughly one-quarter of the metal ions that were bound to the precursor. This demonstrates that charge migration during CID is exclusively due to proton transfer, not metal ion transfer. Also, replacement of highly mobile charge carriers (protons) with less mobile species (metal ions) does not exert a stabilizing influence under the conditions used here. Interestingly, Hb carrying stabilizing ions (Mg²⁺ and Ca²⁺) generates monomeric CID products that are metal depleted. This effect is attributed to a combination of two factors: (1) Me²⁺ binding stabilizes Hb via formation of chelation bridges (e.g., R-COO^– Me^{2+ –}OOC-R); the more Me²⁺ a subunit contains the more stable it is. (2) More than ~90 % of the tetramers contain at least one subunit with a below-average number of Me²⁺. The prevalence of monomeric CID products with depleted Me²⁺ levels is caused by the tendency of these low metal-containing subunits to undergo preferential unfolding/ejection.

Insights into the Mechanism of Protein Electrospray Ionization From Salt Adduction Measurements

The mechanisms whereby protein ions are liberated from charged droplets during electrospray ionization (ESI) remain under investigation. Compact conformers electrosprayed from aqueous solution in positive ion mode likely follow the charged residue model (CRM), which envisions analyte release after solvent evaporation to dryness. The concentration of nonvolatile salts such as NaCl increases sharply within vanishing CRM droplets, promoting nonspecific pairing of Cl^- and Na⁺ with charged groups on the protein surface. For unfolded proteins, it has been proposed that ion formation occurs via the chain ejection model (CEM). During the CEM proteins are expelled from the droplet long before complete solvent evaporation has taken place. Here we examine whether salt adduction levels support the view that folded and unfolded proteins follow different ESI mechanisms. Solvent evaporation during the CEM is expected to be less extensive and, hence, the salt concentration at the point of protein release should be substantially lower than for the CRM. CEM ions should therefore exhibit lower adduction levels than CRM species. We explore the adduction behavior of several proteins that were chosen to allow comparative studies on folded and unfolded structures in the same solution. In-source activation eliminates chloride adducts via HCl release, generating protein ions that are heterogeneously charged because of sodiation and protonation. Sodiation levels measured under such conditions provide estimates of the salt adduction behavior experienced by the “nascent” analyte ions. Sodiation levels are significantly reduced for unfolded proteins, supporting the view that these species are indeed formed via the CEM.

Thermogravimetry study of the effectiveness of different reducing agents during sintering of Cr-prealloyed PM steels

The La_0.6Sr_0.4Co_0.2Fe_0.8O₃ (LSCF48) cathode material was used as a protective-conducting coating on an interconnect made of Crofer 22 APU ferritic steel intended for application in intermediate-temperature solid oxide fuel cell (IT-SOFC) stacks. The LSCF48 coating was deposited on the surface of the steel via screen-printing followed by appropriate thermal treatment. The oxidation kinetics of the Crofer 22 APU steel—uncoated and coated with LSCF48—approximately obeys the parabolic rate law in air at 1,073 K under isothermal and cyclic oxidation conditions. The oxidation rate for uncoated steel is higher than that for coated steel. SEM–EDS and XRD investigations showed that the LSCF48 coating interacts with the steel during long-term oxidation in the afore-mentioned thermal conditions, and an intermediate multilayer interfacial zone is formed. This intermediate layer leads to lower area specific resistance in air at 1,073 K in comparison to the Crofer 22 APU steel without surface modification.