Kinetic study of dissolution of poly(vinyl chloride) in cyclohexanone

The kinetics of dissolution of five fractions of commercial poly(vinyl chloride) in cyclohexanone was studied at temperatures from 20 to 70°C. Good agreement was observed between the experimental results and equations expressing the dependence of the induction periods and the rates of dissolution on temperature and molecular weight. It was found that the apparent activation energy for the swelling process lies in the range 9–14 kcal/mole and the apparent activation energy for the dissolution diffusion process in the range 8–12 kcal/mole. The apparent dependence of activation energies on number-average molecular weight indicates that the chain ends are more important in determining the dissolution rate than the centers of the polymer chains.     

Die Struktur der oberflächlichen Abschlussdomänen in den Ebenen (100) in Eisen

Zusammenfassung Auf Grund der Berechnung der Austauschenergie, der magnetostatischen und magnetoelastischen Energie und der Energie der Blochwände wird das bäumchenförmige Aussehen der oberflächlichen Abschlussbezirken an wenig gegenüber der Ebene (100)geneigten Ebenen erläutert. Aus dem Minimum der Gesamtenergie gehen dann, auch die Abmessungen dieser Bezirke in Abhängigkeit vom Neigungswinkel hervor.     

Raman studies and optical properties of some (PbO)x(Bi2O3)0.2(B2O3)0.8−x glasses

Five (PbO)_x(Bi₂O₃)_0.2(B₂O₃)_0.8−x glasses, where x = 0, 0.2, 0.3, 0.4 and 0.6, were prepared. The dilatometric glass transition temperature (T_g) was found in the region 470 (x = 0)≥ T_g ( °C) ≥ 347 (x = 0.6), and the density (ρ) varied within 4.57 (x = 0) ≤ ρ (g/cm³) ≤ 8.31 (x = 0.6). Raman spectra indicated the conversion of BO₃ to BO₄ entities for low x values but for x > 0.3, namely, for x → 0.6, back‐conversion occurred, most probably. From the measurements of the optical transmission on very thin bulk samples, the room temperature optical gap values (E_g) were determined to be in the range 4.03 (x = 0)≥ E_g (eV) ≥ 3.08 (x = 0.6). The temperature (T) dependence of the optical gap (E_g(T)) in the region 300 ≤ T(K) ≤ 600 was examined and approximated by a linear relationship of the form of E_g(T) = E_g(0)− γT, where γ × 10⁻⁴(eV/K) varied from 5.1 to 6.8. The non‐linear refractive index (n₂) was estimated from the optical gap values and it was found to correspond to the n₂ values calculated from the experimental third‐order non‐linear optical susceptibility taken from the literature. Copyright © 2008 John Wiley & Sons, Ltd.     

Structure and properties of potassium niobato-borophosphate glasses

Bulk glasses of the series (1 ? x)[0.5K₂O–0.1B₂O₃–0.4P₂O₅]–xNb₂O₅ with x = 0–45.7 mol% Nb₂O₅ were prepared by slow cooling in air and investigated by Raman, ³¹P, and ¹¹B MAS NMR spectroscopy. The incorporation of Nb₂O₅ into the parent borophosphate glass results in a substantial increase in the glass transition temperature and chemical durability of glasses. Raman spectra showed that Nb atoms form distorted NbO₆ octahedra, which are isolated at low Nb₂O₅ content, whereas at higher Nb₂O₅ content they form clusters. ¹¹B NMR spectra of the glasses revealed the interaction between Nb₂O₅ and BO₄ tetrahedral units, which results in a partial transformation of tetrahedral BO₄ units to trigonal BO₃ units and the formation of mixed B(OP)_4?n(ONb)_n units.     

Comparison of two cold atmospheric pressure plasma jet configurations in argon

The present study compares the operation of two cold atmospheric plasma jet (CAPJ) configurations: needle-to-cylinder electrode configuration (CAPJ I) and single high-voltage cylinder electrode around the quartz tube (CAPJ II). The CAPJs were operated in argon flowing through a quartz capillary with 0.5-mm inner diameter into the ambient air, and the plasma was generated by sinusoidal kHz frequency AC power supplies. The main emphasis of the study was on the mechanism of the initiation of ionization waves for these two configurations. For both CAPJs, there appeared several ionization waves during one half-period of the applied voltage waveform, and the number of ionization waves increased at higher voltage amplitudes. However, we discovered marked differences in the initiation of the ionization waves for two different CAPJ configuration. The applied voltage controlled the initiation of consecutive ionization waves, which propagated from the grounded electrode towards the tube orifice in CAPJ I. In the case of CAPJ II, certain time had to pass for the initiation of a new ionization wave, and subsequent ionization waves within the same half-period started at the tube orifice. In addition to the differences in the initiation of the ionization waves, we observed that the CAPJ I was ignited and sustained at lower voltages, while CAPJ II produced a longer plasma jet. The observed advantages and deficiencies of investigated CAPJ configurations point out their potential in different applications.     

Versatile Use of Chitosan and Hyaluronan in Medicine

Chitosan is industrially acquired by the alkaline N-deacetylation of chitin. Chitin belongs to the β-N-acetyl-glucosamine polymers, providing structure, contrary to α-polymers, which provide food and energy. Another β-polymer providing structure is hyaluronan. A lot of studies have been performed on chitosan to explore its industrial use. Since chitosan is biodegradable, non-toxic, bacteriostatic, and fungistatic, it has numerous applications in medicine. Hyaluronan, one of the major structural components of the extracellular matrix in vertebrate tissues, is broadly exploited in medicine as well. This review summarizes the main areas where these two biopolymers have an impact. The reviewed areas mostly cover most medical applications, along with non-medical applications, such as cosmetics.     

Protective effect of mitochondrially targeted antioxidant MitoQ on oxidatively stressed fibroblasts

3T3 and VH10 cells were subjected to oxidative damage by hydroxyl radicals generated from Cu(II) ions and ascorbate. The presence of reactive oxygen and nitrogen species in cells was determined using fluorescent dyes. MitoQ—a mitochondrially targeted antioxidant—was examined to prevent cell death and was compared with trolox as a reference standard serving as an antioxidant. MitoQ at lower concentrations (up to 500 nM) prevented damage of mitochondria and thereby increased viability of cells. However, at higher concentrations (over 500 nM) MitoQ decreased the viability of both strains of cells. The last observation indicates that the application of MitoQ should be evaluated also from the point of its cell-destructive potential.