绿色荧光粉YAGG∶Tb,Gd用于FED的尝试

FED器件的发展迫切需要具有化学和热稳定性 ,高亮度 ,长寿命的新型荧光材料。本文合成了Gd3 +离子共掺杂的YAGG∶Tb获得了YAGG∶Tb ,Gd ,并将其用于 0～ 30 0 0V低压范围 ,对其在不同电压和电流密度下的发光特性进行了测试。结果表明 ,该种材料特性优于ZnO∶Zn并且不存在电压与电流饱和     

高能核碰撞中带电多重数快度与能量和中心度的关系

用强子–弦级联模型JPCIAE及相应的Monte Carlo事例产生器研究相对论性核–核碰撞中带电粒子多重数的赝快度密度对能量和中心度的依赖关系.无需另调任何模型参数的条件下,此模型可以同时较好地描述相对论性pp实验数据及PHOBOS和PHENIX实验组的Au+Au实验数据.本文指出:因〈N_part〉并非严格定义的物理量,致使实验上和理论上确定〈N_part〉有一定任意性,从而使得每参加者核子对的带电粒子赝快度密度随着〈N_part〉的增加可能逐渐增大,也可能逐渐减小,因此用它来区分粒子产生机制是欠妥的.     

Synthesis and characterization of white‐light‐emitting polyfluorenes containing orange phosphorescent moieties in the side chain

Two orange phosphorescent iridium complex monomers, 9‐hexyl‐9‐(iridium (III)bis(2‐(4′‐fluorophenyl)‐4‐phenylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐PIr) and 9‐hexyl‐9‐(iridium(III)bis(2‐(4′‐fluorophenyl)‐4‐methylquinoline‐N,C^2′)(tetradecanedionate‐11,13))‐2,7‐dibromofluorene (Br‐MIr), were successfully synthesized. The Suzuki polycondensation of 2,7‐bis(trimethylene boronate)‐9,9‐dioctylfluorene with 2,7‐dibromo‐9,9‐dioctylfluorene and Br‐PIr or Br‐MIr afforded two series of copolymers, PIrPFs and MIrPFs, in good yields, in which the concentrations of the phosphorescent moieties were kept small (0.5–3 mol % feed ratio) to realize incomplete energy transfer. The photoluminescence (PL) of the copolymers showed blue‐ and orange‐emission peaks. A white‐light‐emitting diode with a configuration of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate)/PIr05PF (0.5 mol % feed ratio of Br‐PIr)/Ca/Al exhibited a luminous efficiency of 4.49 cd/A and a power efficiency of 2.35 lm/W at 6.0 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.46, 0.33). The CIE coordinates were improved to (0.34, 0.33) when copolymer MIr10PF (1.0 mol % feed ratio of Br‐MIr) was employed as the white‐emissive layer. The strong orange emission in the electroluminescence spectra in comparison with PL for these kinds of polymers was attributed to the additional contribution of charge trapping in the phosphorescent dopants. © 2007 Wiley Periodicals, Inc. JPolym Sci Part A: Polym Chem 45: 1746–1757, 2007     

枸橼酸铋制剂中铋元素的溶出量分析

微波消解溶样，ICP—AES法测定了枸橼酸铋制剂中铋元素的含量及其在人工胃液和人工肠液中的溶出量。结果表明，枸橼酸铋制剂中的铋元素在人工肠液中的溶出量明显高于人工胃液。方法的检出限为12ng／mL，相对标准偏差(n=7)为3．84％。     

Plant processing by simultaneous lactic acid fermentation and enzyme hydrolysis

Traditional ensiling of plant material by anaerobic lactic acid fermentation was combined with enzymatic hydrolysis (ENLAC for short) with cell wall degrading enzymes (hemicellulases, cellulases, and pectinases) to increase fiber digestibility or to increase the recovery of cell content from plants. Such findings were made using 0.015% (w/w, wet basis) Phylacell® enzyme preparation by ENLAC of corn and corn-sorghum mixtures, but not of forage grasses. Addition to alfalfa of a mixture of cell wall degrading enzymes, such as NOVO Viscozyme® together with NOVO Celluclast® each at 0.2–1.0% (w/w, wet basis), resulted in more rapid ensiling and improvement of rumen digestibility of silage by 20%. After 20 d of ensiling at 25 °C when the same enzymes were added to alfalfa at the 1.0% level, protein recovery by pressing increased by 35%, β-carotene recovery by 80%, and chlorophyll/xanthophyll recovery by 30%. ENLAC with the same enzymes also increased the recovery of sclareol from muscatel sage by 400%.

     

Rotationally Invariant Proof of Bell’s Theorem Without Inequalities for 4k-Dimensional (k=1,2,...) Systems

We present rotationally invariant proof of Bell‘s theorem without inequalities for spin-(2N 1)/2system (N = 2k-1,k = 1, 2, 3, 4...) with only two particles, which is a generalization of Cabello‘s study [Phys. Rev. A 67 (2003)032107].     

Solvothermal synthesis of TiO2: anatase nanocrystals and rutile nanofibres from TiCl4 in acetone

This work reports a new synthetic approach for single‐phase TiO₂ nanomaterials by solvothermal treatment of titanium tetrachloride in acetone at 80–110 °C. Small, uniform, and yet size‐tunable (5–10 nm) anatase titania nanocrystallites were obtained using a low concentration of TiCl₄ in acetone (i.e., at molar ratios of TiCl₄/acetone ≤ 1:15) in the temperature range of 80–110 °C, while rutile nanofibers were synthesized using a high concentration of TiCl₄ (e.g., TiCl₄/acetone = 1:10) at 110 °C. Copyright © 2007 John Wiley & Sons, Ltd.     

新超导体MgCNi3的虚晶掺杂研究

用全势线性缀加平面波方法,考虑局域自旋密度近似研究虚晶掺杂MgCNi3的超导电性和磁性.计算了自旋极化能带结构、体弹性模量和它对压力的导数、原子磁矩 m 及其变化率.计算结果表明,对于电子掺杂的Mg1-xAlxCNi3(0≤x≤0.5), 超导电性和磁涨落随掺杂量的增加逐渐减小.空穴掺杂的Mg1-xNaxCNi3,在x＝0.12处出现铁磁相变,超导电性消失.在MgCNi3少量空穴掺杂区域(0≤x<0.12),表现为超导与磁涨落共存的不稳定状态.     

一种时延范德波尔电磁系统中的复杂行为(Ⅰ)——分岔与混沌现象

建立了一种可积的无穷维系统——时延范德波尔电磁系统，采用Poincaré映射分析了系统随参数E和λ变化发生的分岔与混沌现象，发现这种时延系统具有复杂的非线性动力学特性，例如吸引子共存、间歇性混沌、类似边界碰撞分岔通向混沌以及周期增加的现象.在研究系统时间混沌行为的同时，还对空间混沌行为进行了初步分析，通过描绘空间分布图发现时延范德波尔电磁系统随参数E和λ变化时，在空间中会呈现出周期和混沌等不同的图案. 关键词： 分岔 混沌 无穷维系统 时延范德波尔电磁系统     

用OZSAD软件实现复合式变焦凸轮曲线优化设计

变焦距光学系统凸轮曲线设计是保证光学系统变焦精确、平滑和驱动力均衡的关键。以2运动组元变焦系统的牛顿法变焦推导公式为依据，分析等间隔设计和等角距设计凸轮曲线方法的特点，结合EBA20X10光学镜头设计实例，探讨了结合2者优点实现复合式凸轮曲线优化设计的方法。文中等间距是指变倍透镜组沿光轴的移动量与凸轮转角呈线性关系，凸轮曲线沿圆周展开为直线；等角距是指系统焦距与凸轮转角呈线性关系。最后介绍了可实现3种凸轮曲线辅助设计的软件工具OZSAD V1.2。设计结果表明，该设计方法可以降低凸轮曲线压力角，减少总展开角及加工点对数，还可保证凸轮的设计精度。