High-light induced superoxide radical formation in cytochrome b₆f complex from Bryopsis corticulans as detected by EPR spectroscopy

The generation of superoxide radical (O?·?) in Cyt b?f of Bryopsis corticulans under high light illumination was studied using electron paramagnetic resonance (EPR) spectroscopy. This could be evidenced by the addition of SOD which specifically reacted with O?·?. The generation of O?·? was lost in the absence of oxygen and was found to be suppressed in the presence of NaN? and be scavenged by extraneous antioxidants such as ascorbate, β-carotene and glutathione which could also scavenged 1O?*. These results indicated that O?·? which produced under high light illumination in Cyt b?f of B. corticulans might rise from a reaction which 1O?* could participated in. Also the photo-protection mechanism to Cyt b?f complex by antioxidants which might contain in thylakoid was speculated.     

Study on tribological behaviors of short glass fiber and polytetrafluoroethylene reinforced polycarbonate composites via a d‐optimal mixture design

This study analyzed variations of tribological behaviors that depend on the injection molding techniques during the blending of short glass fiber (SGF) and polytetrafluoroethylene (PTFE) reinforced polycarbonate (PC) composites. The proposed planning of blending experiments is to use a D‐optimal mixture design (DMD). The tribological behaviors of friction coefficient and wear mass loss were selected for discussion. Nine experimental runs, based on a DMD method, utilized to train the back‐propagation neural network (BPNN) and then the simulated annealing algorithm (SAA) approach is applied to search for an optimal mixture ratio setting. In addition, the result of BPNN integrating SAA was also compared with response surface methodology (RSM) approach. The results of confirmation experiment show that DMD, RSM, and BPNN integrating SAA method are effective tools for the optimization of reinforced process. Furthermore, the scanning electron microscope (SEM) images show that the abundant debris are peeled off from the matrix materials and predominant delamination mechanisms and plastic deformation are shown on the worn surface after tribological behavior tests. Copyright © 2010 John Wiley & Sons, Ltd.     

Indium(III)-catalyzed asymmetric hetero-Diels-Alder reaction of Brassard-type diene with aliphatic aldehydes

A highly diastereo- and enantioselective hetero-Diels-Alder (HDA) reaction of a Brassard-type diene with aliphatic aldehydes has been developed. The chiral N,N'-dioxide L2/In(OTf)(3) complex was efficient toward the obtention of the corresponding β-methoxy-γ-methyl α,β-unsaturated δ-lactones in good yields (up to 86%) as well as dr and ee values (up to 97:3 cis/trans and 94% ee). In addition, the product 4a could be easily transformed into the methyl-protected epi-prelactone B by hydrogenation.     

Self-directed reconstitution of proteorhodopsin with amphiphilic block copolymers induces the formation of hierarchically ordered proteopolymer membrane arrays

Manipulating recognition and transport at the nanoscale holds great promise for technological breakthroughs in energy conversion, catalysis, and information processing. Living systems evolve specialized membrane proteins (MPs) embedded in lipid bilayers to exquisitely control communications across the insulating membrane boundaries. Harnessing MP functions directly in synthetic systems opens up enormous opportunities for nanotechnology, but there exist fundamental challenges of how to address the labile nature of lipid bilayers that renders them of inadequate value under a broad range of harsh non-biological conditions, and how to reconstitute MPs coherently in two or three dimensions into non-lipid-based artificial membranes. Here we show that amphiphilic block copolymers can be designed to direct proteorhodopsin reconstitution and formation of hierarchically ordered proteopolymer membrane arrays spontaneously, even when the membrane-forming polymer blocks are in entangled states. These findings unfold a viable approach for the development of robust and chemically versatile nanomembranes with MP-regulated recognition and transport performance.     

Synthesis and Crystal Structures of the Molybdenum(II) Complexes with the N,N‐dimethylthiocarbamoyl Containing Ligand: Crystal Structures of [Mo(CO)2(η2‐S2COEt)(η2‐SCNMe2)(PPh3)] and [Mo(CO)2(η2‐S2CNC4H8)(η2‐SCNMe2)(PPh3)]

The reaction of the thiocarbamoyl‐molybdenum complex [Mo(CO)₂(η²‐SCNMe₂)(PPh₃)₂Cl] 1 , with EtOCS2K and C4H8NCS2NH4 in dichloromethane at room temperature yielded the seven coordinated ethyldithiocarbonate thiocarbamoyl‐molybdenum complex [Mo(CO)₂(η²‐S₂COEt)(η²‐SCNMe₂)(PPh₃)] 2 , and the dithiocarbamate thiocarbamoyl‐molybdenum complex [Mo(CO)₂(η²‐S₂CNC₄H₈)(η²‐SCNMe₂)(PPh₃)] 3 . The geometry around the metal atom of compounds 2 and 3 are capped octahedrons as revealed by X‐ray diffraction analyses. The thiocarbamoyl and ethyldithiocarbonate or pyrrolidinyldithiocarbamate ligands coordinate to the molybdenum metal center through the carbon and sulfur and two sulfur atoms, respectively. Structure parameters, NMR, IR and Mass spectra are in agreement with the crystal chemistry of the two compounds.     

Fe-doped and ZnO-pillared titanates as visible-light-driven photocatalysts

Fe-doped cesium titanate was obtained by a solid state reaction with a mixture of Cs(2)CO(3), TiO(2), and Fe(2)O(3). ZnO-pillared doped titanate nanocomposite was successfully fabricated by exfoliating doped titanate and restacking its nanosheets with ZnO nanoparticles. The resulting nanocomposite was characterized by powder X-ray diffraction, scanning electron microscope, X-ray photoelectron spectroscopy, N(2) adsorption-desorption measurement, thermogravimetric analysis and UV-vis spectroscopy. It was revealed that the present nanocomposite exhibits greatly increased specific surface area with mesoporous texture and that there exists an electronic coupling between the host sheets and the guest nanoparticles in the pillared system. The results of degradation of methylene blue under visible light radiation suggest that doping iron ions improves the material spectral response region and that hybridizing with ZnO nanopillars can suppress the recombination of photogenerated electron-hole pairs.     

Nanotubular metal-organic frameworks with high porosity based on T-shaped pyridyl dicarboxylate ligands

Two nanotubular metal-organic frameworks (MOFs), {Cu(L1)·2H(2)O·1.5DMF}(∞) (1) and {Cu(2)(L2)(2)(H(2)O)(2)·7H(2)O·3DMF}(∞) (2), with novel topologies have been constructed based on Cu(2+), 5-(pyridin-4-yl)isophthalic acid (L1) and 5-(pyridin-3-yl)isophthalic acid (L2), respectively. Two MOFs were characterized by IR spectroscopy, thermogravimetry, single-crystal, and powder X-ray diffraction methods. Network analysis reveals a two-nodal (3,6)-connected (4·6(2))(2)(4(2)·6(10)·8(3)) net and a three-nodal (3,4)-connected (4·8(2))(4)(4(2)·8(2)·10(2))(2)(8(4)·12(2)) net. Interpenetration is inherently prevented by both of the topologies of the frameworks. The porosity of MOF 1 was confirmed by N(2) and CO(2) gas adsorption investigations. MOF 1 exhibits remarkable hydrogen sorption hysteresis at low pressure and a H(2) uptake capacity of 1.05 wt% at 77 K and 1 atm.     

Organic dye bearing asymmetric double donor-π-acceptor chains for dye-sensitized solar cells

A novel efficient metal free sensitizer containing asymmetric double donor-π-acceptor chains (DC) was synthesized for dye-sensitized solar cells (DSSCs). Comparing to 3.80%, 4.40% and 4.64% for the DSSCs based on the dyes with single chain (SC1, SC2) and cosensitizers (SC1 + SC2), the overall conversion efficiency reaches 6.06% for DC-sensitized solar cells as a result of its longer electron lifetime and higher incident monochromatic photon-to-current conversion efficiency.     

Preparation, characterization and photoluminescence properties of BaB2O4: Eu3+ red phosphor

A new red emitting BaB2O4: Eu3+ phosphor was synthesized by solid-state reaction method. X-ray powder diffraction (XRD) analysis confirmed the monoclinic formation of BaB2O4. Field-emission scanning electron-microscopy (FE-SEM) observation indicated that the microstructure of the phosphor consisted of irregular grains with heavy agglomerate phenomena. Upon excitation with 394 nm light, the BaB2O4: Eu3+ phosphor shows bright red emissions with the highest photoluminescence (PL) intensity at 611 nm due to 5D0→7F2 transitions of Eu3+ ions. The CIE chromaticity coordinates are calculated from the emission spectrum to be x=0.64, y=0.35. The effects of the Eu3+ concentration on the PL were investigated. The results showed that the optimum concentration of Eu3+ in BaB2O4 host is 6 mol% and the dipole-dipole interaction plays the major role in the mechanism of concentration quenching of Eu3+ in BaB2O4: Eu3+ phosphor. The effect of charge compensation on the emission intensity was also studied. The charge compensations of Li+, Na+ and K+ anions all increased the luminescent intensity of BaB2O4: Eu3+. K+ anion gave the best improvement to enhance the intensity of the emission, indicating K+ is the optimal charge compensator. All properties show that this phosphor could serve as a potential candidate for application as a red phosphor for NUV chip LED.     

Investigations on the electron paramagnetic resonance parameters for Mn2+ in the ABF3 fluoroperovskites

The electron paramagnetic resonance (EPR) parameters (g factor, the hyperfine structure constant A and the superhyperfine parameters A' and B') for Mn(2+) in the fluoroperovskites ABF(3) (A=K and Cs; B=Zn, Mg, Cd and Ca) are theoretically investigated from the perturbation formulas of these parameters for a 3d(5) ion under ideal octahedra. In the above treatments, not only the crystal-field mechanism but also the charge transfer mechanism is considered uniformly on the basis of the cluster approach. The theoretical EPR parameters are in good agreement with the experimental data. The charge transfer contribution to the g-shift Δg (≈g-g(s), where g(s)≈2.0023 is the spin-only value) is opposite (positive) in sign and comparable in magnitude to the crystal-field one. Nevertheless, the charge transfer contribution to the hyperfine structure constant shows the same sign and about 10% that of the crystal-field one. So, the conventional argument that the charge transfer contributions to the zero-field splittings are negligible for 3d(5) ions under low symmetrically distorted fluorine octahedra is proved no longer valid for the Δg analysis of ABF(3):Mn(2+) in view of the dominant second-order charge transfer perturbation terms. The unpaired spin densities of the fluorine 2s, 2p σ and 2p π orbitals are determined from the quantitative dependences upon the related molecular orbital coefficients, rather than obtained by fitting the observed superhyperfine parameters in the previous works.