Application of triethylenetetramine to the separation of metal ions on selective exchange resin chelex 100

The distribution coefficients of Ca²⁺, Cu²⁺, Ni²⁺ and Pb²⁺ on Chelex 100 in the presence and absence of triethylenetetramine have been determined. Ca²⁺, Cu²⁺, Ni²⁺ and Mg²⁺, Cu²⁺, Pb²⁺ mixtures have been separated on Chelex 100 and Dowex A-1 respectively.     

Determination of thallium and lead in cadmium salts by anodic stripping voltammetry with addition of surfactants to suppress the cadmium peaks

Conditions have been found which make possible the determination of thallium and/or lead in cadmium and its salts without preliminary separation. The electrochemical activity of the cadmium, which usually interferes in the determination of thallium, is inhibited by the addition of 0.01% of polyethylene glycol of M.W. 4000. Thallium is determined by electrolysis at ?0.74 V vs. SCE, in 0.1M EDTA solution: 10^?1M thallium can be determined in the presence of 0.1M cadmium, while copper and lead at 10^?2M and 10^?5M respectively do not interfere. Lead is determined in 0.1M acetic acid containing 0.1% cetyltrimethylammonium bromide (CTAB). The addition of CTAB shifts the cadmium peak, as well as the optimum deposition potential for cadmium, to more negative values, making it possible to determine lead in the presence of cadmium as long as the deposition potential lies in the range between ?0.50 and ?0.56 V vs. SCE. Lead can be determined in the presence of ten times as much thallium.     

Matrix separation of palladium and iridium by the cellulose anion exchanger Cellex T and the subsequent determination of palladium at theμg/g-level

The preconcentration and separation of palladium and iridium from base metals is studied with cellulose (Cellex T) and styrene-divinylbenzene (Varion AT 400) anion exchangers. In spite of lower capacity of Cellex T to chloride complexes of Pd and Ir, it allowed to get a higher preconcentration factor. Yields of 92–99% are achieved for Pd and 96–97% for Ir from the solutions containing great excess of base and heavy metals. Graphite furnace atomic absorption spectrometry is used for the final measurements. The procedure has been applied to the determination of palladium in natural samples.     

Interaction of water with the regenerated cellulose membrane studied by DSC

One to three endothermal peaks atributted to melting of bulk and interfacial water were observed by DSC in the regenerated cellulose — water system. The profiles of thermal effects depend on water content, time of conditioning, film pretreatment and the conditions applied during the preceding freezing-thawing cycles. The occurrence might be deduced of melting-crystallisation processes. A large amount of non-freezable strongly bounded water was also detected. Although cellulose absorbs water quickly after immersion, the structural changes consisting on ordering of polymer fraction occur during further conditioning due to increase in strength of water binding. Using the membranes in the separation module at 90°C causes weakening of these bonds. Differences between interaction of particular cellulose films with water can be detected during the first, the second and the third heating. This revised version was published online in July 2006 with corrections to the Cover Date.     

Is planarity of pyridin-2-yl- and pyrazin-2-yl-formamide thiosemicarbazones related to their tuberculostatic activity? X-ray structures of two pyrazine-2-carboxamide-N′-carbonothioyl-hydrazones

Crystal structures of two title compounds and several their relatives known earlier reveal conservative and characteristic features, which may be related to their tuberculostatic activity. The molecules are predominantly planar due to conjugation through five successive bonds in the zwitterionic fragment S⁻–C(sp²)–N–NH⁺–C(sp²)–NH₂ and intramolecular hydrogen bonds, which prevent rotation of the adjacent pyrazine (or pyridine) ring. It has been suggested that in spatial sense such planar molecules resemble acridines intercalating with nucleic acids and that similar process may be responsible for tuberculostatic activity of the title pyrazine-2-carboxamide-N′-carbonothioyl-hydrazones.     

Comparison of Different Sorbents for Solid-Phase Extraction of Phenoxyalkanoic Acid Herbicides

An HPLC procedure for determination of phenoxyalkanoic acid herbicides in water samples is proposed. The analytical column Phenomenex C18(2) Luna 5 µm and UV detection at 225 nm were applied. Baseline resolution was achieved in isocratic mode with a mobile phase consisting of acetonitrile/acetic acid (40/60, v/v), adjusted to pH 2.5. SPE sorbents – C₁₈ BondElut, phenyl-silica, LiChrolut SAX and polymeric sorbents – were compared for isolation and preconcentration of 6 phenoxyalkanoic acid herbicides. Higher (above 95%) and more reproducible recoveries were obtained with polymeric and phenyl-silica sorbents using pure methanol for elution. The method was tested for river water samples with the limit of detection in the range of 2–3 µg L⁻¹ (for 50 mL sample) and a reproducibility of 5% RSD.     

Über kondensierte Heterocyclen aus β-Isothiocyanatoketonen und Aminoalkoholen bzw. Diaminen

2- and 3-aminoalcohols, o-aminobenzylalcohol, o-hydroxybenzylamine and o-amino(thio)-phenol react with 4-isothiocyanato-4-methyl-2-pentanone (1) to yield derivatives of condensed heterocycles (oxazolopyrimidines7, pyrimidooxazine8, pyrimidobenzoxazines9, 10, pyrimidobenzoxazole11 a and pyrimidobenzothiazole11 c respectively). Ethylenediamine or 1,3-diaminopropane react with1 to yield either imidazo-pyrimidine13 and pyrimidopyrimidine14 respectively or the 1,2-ethylene- and trimethylenebisdihydro-2(1H)-pyrimidinethione15 a, b respectively, according to the molar ratio of the reactants. o-Phenylenediamine gives pyrimidobenzimidazole11 d. 11a undergoes ring cleavage in boiling dimethylformamide followed by methylpyrimidine-pyridine rearrangement to dihydrohydroxyphenylamino-2(1H)-pyridinethione12, while15 a is converted into the bis-4-(ethanediimino)-pyridinthione16.     

Sorption behavior of acidic herbicides on carbon nanotubes

Carbon nanotubes and graphitized carbon are investigated as adsorbents for solid phase extraction of dicamba and 2,4,5-T, two phenoxyalkanoic acid herbicides. These adsorbents have much greater adsorption capability than that of C₁₈ bonded silica, which was also tested for comparison studies. The adsorption capacity increases remarkably at lower pH of the sample solution. Freundlich isotherms were applied to analyze the data. Our studies suggest that carbon nanotubes have great potential applications in environmental analysis.     

Synthesis of Functionalized Spiro[cycloalkanono-2,3'-thiophenes] via Tandem Conjugate Addition-Cyclization of 3-Oxoacid Thioanilides to Nitroalkenes

A convenient method is described for the synthesis of functionalized spiro[cycloalkanono-2,3-thiophenes] by treatment of cyclic 3-oxoacid thioanilides with -nitrostyrenes. Reaction of the obtained products with acetic anhydride yielded the corresponding oxime acetates.     

The solid-phase synthesis of 2-5-linked oligoriboadenylates containing 8-bromoadenine

To increase the accessibility of 8-bromo-2′,5′-oligoadenylates, we developed a synthesis of 2′-5′-linked oligoriboadenylates containing varying numbers of 8-bromoadenosine residues based on the use of a CPG-LCA solid support and the phosphoramidite approach. Although N⁶benzoyl protection was satisfactory for incorporation of nonmodified adenine residues into 2′,5′-oligonucleotides, the effective incorporation of 8-bromoadenine into such 2′,5′-linked oligomers required use of a non acyl protecting group. Amidine protection of the purine exocyclic amino function proved compatible with all aspects of the phophoramidite approach and with the hydroxyl protection groups employed.