Improvement of plant parameters of the ROBO gamma irradiation facility due to design modification

Two industrial scale, “ROBO” type ⁶⁰Co gamma irradiation facilities have recently been put into operation in Syria and Peru, and the dosimetry commissioning of both plants have been carried out to determine dose distribution within products and to calculate plant parameters such as efficiency, dose uniformity ratio and throughput. There are some design modifications between the two plants in connection with the location of the carriers with respect to the source plaque and also to each other. The effect of these construction modifications on the plant parameters is discussed in the analysis of the dose distribution data measured in the carriers with depth and height among the four irradiation rows on both sides of the source plaque. The plant parameters were also calculated for different product densities using the technical data of the facilities, and the calculated and measured results were compared to each other.     

Synthetic models for the cysteinate-ligated non-heme iron enzyme superoxide reductase: observation and structural characterization by XAS of an Fe(III)-OOH intermediate

Superoxide reductases (SORs) belong to a new class of metalloenzymes that degrade superoxide by reducing it to hydrogen peroxide. These enzymes contain a catalytic iron site that cycles between the Fe(II) and Fe(III) states during catalysis. A key step in the reduction of superoxide has been suggested to involve HO(2) binding to Fe(II), followed by innersphere electron transfer to afford an Fe(III)-OO(H) intermediate. In this paper, the mechanism of the superoxide-induced oxidation of a synthetic ferrous SOR model ([Fe(II)(S(Me2)N(4)(tren))](+) (1)) to afford [Fe(III)(S(Me2)N(4)(tren)(solv))](2+) (2-solv) is reported. The XANES spectrum shows that 1 remains five-coordinate in methanolic solution. Upon reaction of 1 with KO(2) in MeOH at -90 degrees C, an intermediate (3) is formed, which is characterized by a LMCT band centered at 452(2780) nm, and a low-spin state (S = 1/2), based on its axial EPR spectrum (g(perpendicular) = 2.14; g(parallel) = 1.97). Hydrogen peroxide is detected in this reaction, using both (1)H NMR spectroscopy and a catalase assay. Intermediate 3 is photolabile, so, in lieu of a Raman spectrum, IR was used to obtain vibrational data for 3. At low temperatures, a nu(O-O) Fermi doublet is observed in the IR at 788(2) and 781(2) cm(-)(1), which collapses into a single peak at 784 cm(-1) upon the addition of D(2)O. This vibrational peak diminishes in intensity over time and essentially disappears after 140 s. When 3 is generated using an (18)O-labeled isotopic mixture of K(18)O(2)/K(16)O(2) (23.28%), the vibration centered at 784 cm(-1) shifts to 753 cm(-1). This new vibrational peak is close to that predicted (740 cm(-1)) for a diatomic (18)O-(18)O stretch. In addition, a nu(O-O) vibrational peak assigned to free hydrogen peroxide is also observed (nu(O-O) = 854 cm(-1)) throughout the course of the reaction between Fe(II)-1 and superoxide and is strongest after 100 s. XAS studies indicate that 3 possesses one sulfur scatterer at 2.33(2) A and four nitrogen scatterers at 2.01(1) A. Addition of two Fe-O shells, each containing one oxygen, one at 1.86(3) A and one at 2.78(3) A, improved the EXAFS fits, suggesting that 3 is an end-on peroxo or hydroperoxo complex, [Fe(III)(S(Me2)N(4)(tren))(OO(H))](+). Upon warming above -50 degrees C, 3 is converted to 2-MeOH. In methanol and methanol:THF (THF = tetrahydrofuran) solvent mixtures, 2-MeOH is characterized by a LMCT band at lambda(max) = 511(1765) nm, an intermediate spin-state (S = 3/2), and, on the basis of EXAFS, a relatively short Fe-O bond (assigned to a coordinated methanol or methoxide) at 1.94(10) A. Kinetic measurements in 9:1 THF:MeOH at 25 degrees C indicate that 3 is formed near the diffusion limit upon addition of HO(2) to 1 and converts to 2-MeOH at a rate of 65(1) s(-1), which is consistent with kinetic studies involving superoxide oxidation of the SOR iron site.     

Zur Bildung und Struktur der Phosphinophosphiniden-phosphorane tBu2P?PP(Me)tBu2 1, tBu(Me3Si)P?PP(Me)tBu2 2 und tBu2P?PP(Br)tBu2 3

Synthesis and Structure of Phosphinophosphinidene-phosphoranes tBu₂P? P?P(Me)tBu₂ 1, tBu(Me₃Si)P? P?P(Me)tBu₂ 2, and tBu₂P? P?P(Br)tBu₂ 3 A new method for the synthesis of 1 and 2 (Formulae see ?Inhaltsübersicht”?) is reported based on the reaction of 5 with substitution reagents (Me₂SO₄ or CH₃Cl). The results of the X-ray structure determination of 1 and 2 are given and compared with those of 3 . While in 3 one P? P distance corresponds to a double bond and the other P? P distance to a single bond (difference 12.5 pm) the differences of the P? P distances in 1 and 2 are much smaller: 5.28 pm in 1 , 4.68 pm in 2 . Both 1 and 2 crystallize monoclinic in the space group P2₁/n (Z = 4). 2 additionally contains two disordered molecules of the solvent pentane in the unit cell. Parameters of 1 : a = 884.32(8) pm, b = 1 924.67(25) pm, c = 1 277.07(13) pm, β = 100.816(8)°, and of 2 : a = 1 101.93(12) pm, b = 1 712.46(18) pm, c = 1 395.81(12) pm, β = 111.159(7)°, all data collected at 143 K. The skeleton of the three P atoms is bent (PPP angle 100.95° for 1 , 100.29° for 2 and 105.77° for 3 ). Ab initio SCF calculations are used to discuss the bonding situation in the molecular skeleton of the three P atoms of 1 and 3 . The results show a significant contribution of the ionic structure R₂P? P(^?)? P(⁺)(X)R₂. The structure with (partially) charged P atoms is stabilized by bulky polarizable groups R (as tBu) as compared to the fully covalent structure R₂P? P(X)? PR₂.     

Experimental and Computational Study of the Thermal Decomposition of 3‐Methyl‐3‐buten‐1‐ol in m‐Xylene Solution

An experimental study of the thermal decomposition of a β‐hydroxy alkene, 3‐methyl‐3‐buten‐1‐ol, in m‐xylene solution, has been carried out at five different temperatures in the range of 513.15–563.15 K. The temperature dependence of the rate constants for the decomposition of this compound in the corresponding Arrhenius equation is given by ln k (s^?1) = (25.65 ± 1.52) ? (17,944 ± 814) (kJ·mol^?1)·T^?1. A computational study has been carried out at the M05–2X/6–31+G(d,p) level of theory to calculate the rate constants and the activation parameters by the classical transition state theory. There is a good agreement between the experimental and calculated rate constants and activation Gibbs energies. The bonding characteristics of reactant, transition state, and products have been investigated by the natural bond orbital analysis, which provides the natural atomic charges and the Wiberg bond indices. Based on the results obtained, the mechanism proposed is a one‐step process proceeding through a six‐membered cyclic transition state, being a concerted and slightly asynchronous process. The results have been compared with those obtained previously by us (Struct Chem 2013, 24, 1811–1816) for the thermal decomposition of 3‐buten‐1‐ol, in m‐xylene solution. We can conclude that in the compound studied in this work, 3‐methyl‐3‐buten‐1‐ol, the effect of substitution at position 3 by a weakly activating CH₃ group is the stabilization of the transition state formed in the reaction and therefore a small increase in the rate of thermal decomposition.     

Existence of positive solution for a sixth–order differential system with variable parameters

This paper investigates the existence of positive solutions for a sixth-order differential system with three variable parameters. Using a fixed point theorem and an operator spectral theorem we give some new existence results.     

Estimation of radon and thoron caused dose at exraction and processing sites of mineral sand mining area in Vietnam (HA TINH province)

Mineral sands are mined in several countries to supply to the titanium and zircon producing industries. Coastal black mineral sands usually contain, besides ilmenite (FeTiO₃) and rutile (TiO₂), radioactive minerals such as zircon (ZrSiO₄) and monazite (RePO₄). Radon and thoron activity concentration originated from natural radioactive contents of the black mineral sand was monitored at the extraction and processing for black minerals in the coastal areas of Ha Tinh Province, one of the around 40 coastal mineral sand deposits in Vietnam. The survey was carried out with the Raduet chambers made by Radosys Ltd—Hungary. The obtained results for 25 investigated points show that the measured values are not high in the residential houses and in case of the sand extraction site as well. At the titanium processing plant the measured values were higher than outside the facility (Radon: 18–55 Bq/m³ with average of 34 Bq/³ and Thoron 33–118 Bq/m³ with average of 58 Bq/m³) but still comparable to the average concentration of the world published by UNSCEAR. The typical outdoor levels of radon and thoron gas are each of the order of 10 Bq/m³. Although the radon concentrations were low in the zircon and titanium processing plants, the thoron concentrations in the houses for separating rutile and zircon were very high. At zircon processing factory, the thoron concentration could reach 2,931 Bq/m³ and the estimated annual effective dose would be 21.4 mSv/a. Intervention has to be taken in order to reduce the thoron level in this factory since the level of thoron and its progenies corresponding to an annual occupational effective dose is beyond the action level of 6 mSv/a.     

Structural and Kinetic Aspects of Blood Plasma Protein Adsorption on the Surface of Hydrophobic Polymers

Abstract

Due to the wide use of polymers in medicine, researchers are required to solve a very important problem–to understand the interaction between materials of nonphysiological origin and the surrounding biological liquids, and tissues, particularly blood.     

Ca and Mg determination from inhabitants of Brazil using neutron activation analysis

In this study the neutron activation analysis (NAA) technique was applied to determine Ca and Mg in whole blood from inhabitants of Brazil for the purpose of establishing concentration ranges indicative of sex and age. The initiative to perform these measurements is related to the increase in heart disease. According to recent statistics from WHO, the average is one death due to heart attack in Brazil, every five minutes. The measures were performed considering lifestyle factors (non-smokers, non-drinkers and no history of toxicological exposure) of Brazilian inhabitants. A healthy group constituted of male (n = 94) and female (n = 84) blood donors, ages between 18 and 70 years and above 50 kg, was selected from the blood banks and hematological laboratories of Brazil. The influence of sex was also investigated considering several age ranges (18–29, 30–40, 41–50, >50 years). The results show significant differences when a comparison is made by sex and age and may be useful to identify or prevent clinical diseases. These results emphasize the need to perform periodic evaluation of Ca and Mg in blood.