Bragg-type polarization gratings formed in thick polymer films containing azobenzene and tolane moieties

Holographic gratings were formed in thick polymer films containing azobenzene and diphenylacetylene (tolane) moieties in the Bragg regime. Amorphous polymers containing various contents of the azobenzene moiety with photosensitivity and the tolane moiety with large birefringence in the side chain were synthesized, and optically transparent thick polymer films were prepared. The films were irradiated with a linearly polarized beam from an Ar+ laser (488 nm), and the transmittance of a He-Ne laser beam (633 nm) through a pair of crossed polarizers, with the film between them, was measured to estimate a photoinduced birefringence (deltan). The value of deltan increased with an increase in the tolane moiety content in the polymer films. When two linearly polarized beams at 488 nm were interfered in the film, a diffraction beam was observed, and the maximum diffraction efficiency (eta) increased with the tolane moiety content. In the film containing 70 mol% of the tolane moiety, the highest eta of 99% was achieved, and angular selectivity due to Bragg diffraction was clearly observed. We consider the cooperative molecular motion of the tolane moieties to be induced by the photoinduced change in alignment of the azobenzene moieties even if the polymers show no liquid-crystalline phase. When two orthogonal circularly polarized beams were allowed to interfere in the film, a Bragg-type polarization grating was formed. It was found that the value of eta reached 90% within 920 ms.     

Ion–ion interactions of LiPF6 and LiBF4 in propylene carbonate solutions

Self-diffusion coefficients of Li⁺ D_Li⁺, PF₆⁻ D_PF6⁻ and solvent propylene carbonate (PC) D_PC in LiPF₆−PC solutions were determined at 298 K by the pulse gradient spin echo (PGSE) NMR technique over the salt concentration range of 0.1–3.0 M (M = mol dm^– 3). The order of the diffusion coefficients was found to be D_Li⁺ < D_PF6⁻ < D_PC over the concentration range examined, and they were monotonically decreased with increasing the salt concentration. Haven ratio Λ/Λ_NMR, where Λ and Λ_NMR represent the ionic conductivity measured electrochemically and that estimated via the Nernst-Einstein equation using the diffusion coefficient, respectively, was evaluated as the measure of the ion–ion interaction in the LiPF₆–PC solutions. Though Λ/Λ_NMR values for LiPF₆-solutions decrease with increasing the salt concentration, they were greater than those for LiBF₄–PC solutions over the whole concentration range examined, which indicates that the ion pair formation ability of PF₆^– ion is weaker than that of the BF₄^– ion. The smaller value of the ionic conductivity for the highly concentrated LiPF₆–PC solution (above 2.0 M) than that of the LiBF₄-solutions can be attributed to the more rapidly increased viscosity relative to the LiBF₄-solution. Classic molecular dynamics (MD) simulations for the respective LiPF₆ and LiBF₄-solution of 0.5 and 1.0 M were also carried out based on the effective pair potentials. Diffusion coefficients, ionic conductivity and Haven ratio for these solutions were calculated from MD trajectories, and they qualitatively agree with those evaluated by experiments. Pair correlation functions g_LiO(r) (for Li⁺–O (PC) pair) and g_LiPF6(r) (for Li⁺–PF₆^– pair) or g_LiBF4(r) (for Li⁺–BF₄^– pair) revealed that the lithium ion weakly forms the contact ion pairs with PF₆^–, whilst strongly with BF₄^–, which supports the present experimental results. Moreover, the simulation results show that both anions in the contact ion pairs predominantly take the monodentate form, which is in contrast to the multidentate coordination predicted by ab initio calculation in gas phase.     

Antibacterial metal implant with a TiO2‐conferred photocatalytic bactericidal effect against Staphylococcus aureus

Photocatalysis with anatase Titanium dioxide (TiO₂) under ultraviolet A (UVA) has a well recognized bactericidal effect. There have been a few reports, however, on the effects of photocatalysis on bio‐implant‐related infections. The purpose of present study was to evaluate the photocatalytic bactericidal effects of anatase TiO₂ on Staphylococcus aureus (S. aureus) associated with surgical site infections. TiO₂ films were synthesized on commercially pure titanium substrates and SUS316 stainless steel using a plasma source ion implantation method followed by annealing. The chemical composition of the surface layers was determined using GXRD and XPS. The disks were seeded with cultured S. aureus and exposed to UVA illumination from black light. The bactericidal effect of the TiO₂ films was evaluated by counting the survived colonies statistically. A structural gradient anatase type TiO₂ layer formed on all substrates. The viability of the bacteria on the photocatalytic TiO₂ film coated on titanium was suppressed to 7.0% at 30 minutes and 5.5% at 45 minutes, whereas that on a similarly coated stainless steel was suppressed to 45.8% at 30 minute and 28.6% at 45 minutes (ANOVA: p < 0.05). Complete bacterial inactivation was achieved after 90 minutes on titanium and after 60 minutes on stainless steel. The photocatalytic bactericidal effect of TiO₂ is useful for sterilizing the contaminated surfaces of bioimplants. Copyright © 2008 John Wiley & Sons, Ltd.     

Ghrelin-like peptide with fatty acid modification and O-glycosylation in the red stingray, Dasyatis akajei

Background  

Ghrelin (GRLN) is now known to be an appetite-stimulating and growth hormone (GH)-releasing peptide that is predominantly synthesized and secreted from the stomachs of various vertebrate species from fish to mammals. Here, we report a GRLN-like peptide (GRLN-LP) in a cartilaginous fish, the red stingray, Dasyatis akajei.     

Equivalent cross-relaxation rate imaging positively correlates with pathological grade and cell density of adipocytic tumors

Objective

Equivalent cross-relaxation rate imaging (ECRI) is an MRI technique used to evaluate qualitative changes in protein-water interactions. We aimed to prospectively evaluate the utility of ECRI for classification of adipocytic tumors.

Materials and Methods

Institutional Review Board approval was obtained and all patients provided informed consent. Study participants included 40 patients with adipocytic tumors who were diagnosed with lipomas (n = 22), atypical lipomatous tissue/well-differentiated liposarcoma (ALT/WDL; n = 9), myxoid/round cell liposarcoma (MyL; n = 6), and dedifferentiated liposarcoma (DDL; n = 3), and 20 control patients for whom subcutaneous fat in the buttock or thigh was analyzed.

Results

Mean ECR values of lipomas, ALT/WDL, and subcutaneous fat were low, and those of MyL and DDL were high. Mean ECR values of MyL and DDL were significantly higher than those of ALT/WDL. The cut-off value was 5.1%. There was a positive correlation between ECR value, pathological grade, and cell density in adipocytic tumors.

Conclusion

The ECR value positively correlates with pathological grade and cell density of adipocytic tumors. Our findings suggest that ECRI is a useful method for preoperative evaluation of adipocytic tumors.     

Spatiotemporal alteration of phospholipids and prostaglandins in a rat model of spinal cord injury

We determined quantitative and qualitative alterations in lipids during the occurrence and progression of spinal cord injury (SCI) in rats to identify potential clinical indicators of SCI pathology. Imaging mass spectrometry (IMS) was used to visualize twelve molecular species of phosphatidylcholine (PC) on thin slices of spinal cord with SCI. In addition, twelve species of phospholipids and five species of prostaglandins (PGs) were quantified by liquid chromatography-electrospray ionization-tandem mass spectrometry (LC-ESI-MS/MS) of lipid extracts from control/injured spinal cords. Unique distribution patterns were observed for phospholipids with different fatty acid compositions, and distinct dynamic changes were seen in both their amounts and their distributions in tissue as tissue damage resulting from SCI progressed. In particular, PCs containing docosahexaenoic acid localized to the large nucleus in the anterior horn region at one day post-SCI and rapidly decreased thereafter. In contrast, PCs containing arachidonic acid (AA-PCs) were normally found in the posterior horn region and were intensely and temporarily elevated one week after SCI. Lysophosphatidylcholines (LPCs) also increased at the same SCI stage and in regions with elevated AA-PCs, indicating the release of AA and the production of PGs. Moreover, LC-ESI-MS/MS analysis of lipid extracts from the spinal cord tissue at the impact site demonstrated a peak in PGE2 that reflected the elevation/reduction pattern of AA-PCs and LPC. Although further investigation is required, we suggest that invasive immune cells that penetrated from the impaired blood-brain barrier at 1-2 weeks post-SCI may have produced LPCs, released AA from AA-PCs, and produced PGs in SCI tissue at sites enriched in AA-PCs/LPC.     

The Active Phase of Nickel/Ordered Ce(2) Zr(2) O(x) Catalysts with a Discontinuity (x=7-8) in Methane Steam Reforming

Breaking news: A unique discontinuous property and an active phase of Ni/ordered Ce(2) Zr(2) O(x) (x=7-8) solid-solution catalysts were observed during methane steam reforming. The catalytic performance of Ni/Ce(2) Zr(2) O(x) strongly depended on the phase and oxygen content of the Ce(2) Zr(2) O(x) support.     

Site-controlled application of electric potential on a conducting polymer "canvas"

A novel patterning method for conducting polymer films was successfully demonstrated using the concept of bipolar electrochemistry. The local application of an anodic potential to poly(3-methylthiophene) (PMT) and poly(3,4-ethylenedioxythiophene) (PEDOT) on a bipolar electrode (BPE) realized local electrochemical doping and reaction depending on the supporting salt used. The potential applied on the BPE was measured and corresponded well to the patterns. The array-type driving electrode system was able to draw complex patterns in a site-controlled manner.     

Preparation and catalytic performances of a molecularly imprinted Ru-complex catalyst with an NH2 binding site on a SiO2 surface

A catalyst surface with an active metal site, a shape-selective reaction space, and an NH(2) binding site for o-fluorobenzophenone was designed and prepared by the molecular imprinting of a supported metal complex on a SiO(2) surface. A ligand of a SiO(2)-supported Ru complex that has a similar shape to the product of o-fluorobenzophenone hydrogenation was used as a template. An NH(2) binding site for o-fluorobenzophenone was spatially arranged on the wall of a molecularly imprinted cavity with a similar shape to the template. The structures of the SiO(2)-supported and molecularly imprinted Ru catalysts were characterized in a step-by-step manner by means of solid-state magic angle spinning (MAS) NMR, XPS, UV/Vis, N(2) adsorption, XRF, and Ru K-edge EXAFS. The molecularly imprinted Ru catalyst exhibited excellent shape selectivity for the transfer hydrogenation of benzophenone derivatives. It was found that the NH(2) binding site on the wall of the molecularly imprinted cavity enhanced the adsorption of o-fluorobenzophenone, of which the reduction product was imprinted, whereas there was no positive effect in the case of o-methylbenzophenone, which cannot interact with the NH(2) binding site through hydrogen bonding.     

The anisotropic low-temperature specific heat of organic superconductor κ-(BEDT-TTF)2CU(NCS)2 in magnetic field

We measured the low-temperature specific heat of the layered organic superconductor κ-(BEDT-TTF)₂Cu(NCS)₂ for the magnetic field directed along and across the conducting plane and found a difference between the two measurements. Our data indicate the existence of a nodeless superconducting state at zero field and low temperature. The field dependence of the specific heat anisotropy consists of two linear branches with the crossover field equal to the upper critical field perpendicular to the conducting plane.