Pervaporation in chemical analysis

Unlike thermal processes such as distillation, pervaporation relies on the relative rates of solute permeation through a membrane and is a combination of evaporation and gas diffusion. The analytical pervaporation systems consist of a membrane module suitable for liquid sample introduction and a vacuum (or a sweeping gas) on the permeate side. It has been used in a wide range of applications including the analysis of various organic and inorganic compounds, and sample concentration. It has been directly interfaced with gas chromatography, spectrophotometry, capillary electrophoresis, electrochemical detectors, liquid chromatography, and mass spectrometry. A wide range of liquids, slurries, and solids samples has been analyzed using these techniques. This review highlights the basic principles of the pervaporation and the state of its current development as applied to analytical chemistry.     

New studies of X-ray diffraction line profiles from aggregates of distorted crystallites I

The fourth central moment of an X-ray diffraction profile from an aggregate of distorted crystallites has been expressed by Mitra (1964a) as a function of the crystallite size, strain and strain gradients in the specimen. While the usual methods of line profile analysis yield information regarding either the apparent strain or the rms strain, the present study provides additional information regarding strain distribution in the form of strain derivatives and rms displacements of atoms over a given distancet in the direction of study. The strain parameters like 〈ee′〉, 〈ee″〉 have been obtained from fourth moment of the strain profile against range plots. The strain parameters thus obtained have subsequently been used to determine the rms displacements of the atoms. Alloys of copper and zinc at different stages of cold working and annealing have been studied by this method. The results have been discussed in the light of dislocation distribution, polygonisation and grain growth as well as distortion waves in the distorted crystals.     

A two-compartment model interacting with dynamic drugs

By combining the total cell evolution curve and a two-compartment model interacting with dynamic anti-cancer agents, the evolution of subpopulations has been analytically obtained and investigated in this work.     

Characterization of the network properties of poly(ethylene glycol)–acrylate hydrogels prepared by variations in the ethanol–water solvent composition during crosslinking copolymerization

The characteristics of poly(ethylene glycol) (PEG)–acrylate hydrogel networks were investigated as a function of the ethanol–water solvent composition during free‐radical crosslinking copolymerization. Macromonomer (88% ω‐methoxy‐PEG–acrylate and 10% ω‐phenoxy‐PEG–acrylate) and crosslinker (2% PEG–diacrylate) concentrations were kept constant. As the copolymerization progressed, the polymer solution in 100% ethanol became increasingly turbid, indicating the development of a heterogeneous network structure. In 100% water, however, the initially turbid polymer solution became increasingly transparent as the crosslinking copolymerization progressed. All the gels were optically clear upon equilibration in water. Kinetic studies, with attenuated total reflectance‐infrared, showed a long induction period, along with a lowered reaction rate, in 100% ethanol, and a decrease in conversion with an increase in ethanol content. These results agree with the UV analysis of the sol fractions, which indicated an increase in the amounts of unreacted PEG–acrylates with an increase in the ethanol content. The gels which were formed with a high ethanol concentration exhibited lower Young's modulus and higher swelling ability, suggesting that the network structure was significantly affected by the solvent composition during free‐radical crosslinking copolymerization. From the stress–strain and swelling experiments, the Flory–Huggins interaction parameter was evaluated. The creep characteristics of the hydrogels were modeled with two Kelvin elements. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2677–2684, 2002     

Fluid-elastic instability in tube arrays subjected to air-water and steam-water cross-flow

Flow induced vibrations in heat exchanger tubes have led to numerous accidents and economic losses in the past. Efforts have been made to systematically study the cause of these vibrations and develop remedial design criteria for their avoidance. In this research, experiments were systematically carried out with air-water and steam-water cross-flow over horizontal tubes. A normal square tube array of pitch-to-diameter ratio of 1.4 was used in the experiments. The tubes were suspended from piano wires and strain gauges were used to measure the vibrations. Tubes made of aluminum; stainless steel and brass were systematically tested by maintaining approximately the same stiffness in the tube-wire systems. Instability was clearly seen in single phase and two-phase flow and the critical flow velocity was found to be proportional to tube mass. The present study shows that fully flexible arrays become unstable at a lower flow velocity when compared to a single flexible tube surrounded by rigid tubes. It is also found that tubes are more stable in steam-water flow as compared to air-water flow. Nucleate boiling on the tube surface is also found to have a stabilizing effect on fluid-elastic instability.     

Search for anomalous interaction mean free paths of charge, 2≦Z≦18 projectile fragments in emulsions exposed to 1.8 A GeV40Ar ions

⁴⁰Ar-emulsion interactions are studied, to investigate the question of anomalons, in twoG- 5 emulsion stacks. In about 4600 primary interactions, projectile fragments of Z≧2 for all generations have been followed until they interact or leave the stack. After careful estimation of charges of these fragments, variation of their mean free paths is studied as a function of distance from the preceding interaction. Generation effect,N _h dependence and production angle effect are investigated. In addition multi-chain events are analysed separately. Our results do not show anomalons at the 6% level and are consistent with non-occurrence of anomalons. However, this experiment is not sensitive enough to rule out anomalons (with a mfp of the order of 2 to 3 cm) produced at about 1% (or less) level.