Studies with enamines: Reactivity of N,N‐dimethyl‐N‐[(E)‐2‐(4‐nitrophenyl)‐1‐ethenyl]amine towards nitrilimine and aromatic diazonium salts

In the presence of triethylamine, cycloaddition reaction of enamine 1 with hydrazonoyl halides 2 followed by dimethylamine elimination was achieved, yielding the corresponding 1,3,4‐trisubstituted pyrazoles 4 . Coupling of enamine 1 with aromatic diazonium salts afforded 2‐(arylhydrazono)‐2‐(4‐nitrophenyl)acetaldehyde 9 in good yield. Refluxing the phenyl hydrazone 9a with chloroacetone in ethanol in the presence of triethylamine afforded 1,3,5‐trisubstituted pyrazole 12a , formed via intermediate 11a. Reaction of 9a with hydroxylamine hydrochloride in ethanol in the presence of anhydrous sodium acetate yielded oxime 13a which was irradiated in a microwave oven in the presence of acetic acid to afford a mixture of 15a and 16a.     

Protective Effect of Thymus serrulatus Essential Oil on Cadmium-Induced Nephrotoxicity in Rats,through Suppression of Oxidative Stress and Downregulation of NF-κB,iNOS, and Smad2 mRNA Expression

The purpose of the research was to examine the protective effect of essential oil from Thymus serrulatus Hochst. ex Benth. (TSA oil) against cadmium (Cd)-induced renal toxicity. The experimental protocol was designed using 30 healthy adult Wistar albino rats allocated into five groups containing six animals in each group. Group 1 was treated as normal control and groups 2, 3, 4, and 5 were treated with cadmium chloride (CdCl₂, 3 mg/kg, IP) for 7 days. Group 3 was also treated with silymarin (100 mg/kg, PO) as a standard group, while groups 4 and 5 were administered with TSA oil at doses of 100 and 200 mg/kg PO, respectively. The nephrotoxicity was measured with various parameters such as kidney function markers, oxidative stress markers (glutathione (GSH) and malondialdehyde (MDA)), and messenger ribonucleic acid (mRNA) expression levels of inflammatory factors. The histological studies were also evaluated in the experimental protocol. The CdCl₂-treated groups showed a significant increase in the levels of serum kidney function markers along with MDA levels in kidney homogenate. However, renal GSH level was found to be reduced significantly. It was found that CdCl₂ significantly upregulated the nuclear factor levels of kappaB (NF-κB p65), inducible nitric oxide synthase (iNOS), and small mothers against decapentaplegic (Smad2) as compared to the normal control group. On the other hand, TSA oil significantly improved the increased levels of serum kidney function markers, non-enzymatic antioxidants, and lipid peroxidation. In addition, TSA oil significantly downregulated the increased expression of NF-κB p65, iNOS, and Smad2 in Cd-intoxicated rats. Moreover, the histological changes in the tissue samples of the kidney of Cd-treated groups were significantly ameliorated in the silymarin- and TSA-oil-treated groups. The present study reveals that TSA oil ameliorates Cd-induced renal injury, and it is also proposed that the observed nephroprotective effect could be due to the antioxidant potential of TSA oil and healing due to its anti-inflammatory action.     

Scaling Transformations for Boundary Layer Flow near the Stagnation-Point on a Heated Permeable Stretching Surface in a Porous Medium Saturated with a Nanofluid and Heat Generation/Absorption Effects

In this article, a similarity solution of the steady boundary layer flow near the stagnation-point flow on a permeable stretching sheet in a porous medium saturated with a nanofluid and in the presence of internal heat generation/absorption is theoretically studied. The governing partial differential equations with the corresponding boundary conditions are reduced to a set of ordinary differential equations with the appropriate boundary conditions via Lie-group analysis. Copper (Cu) with water as its base fluid has been considered and representative results have been obtained for the nanoparticle volume fraction parameter f{\phi} in the range 0 ￡ f ￡ 0.2{0\leq \phi \leq 0.2} with the Prandtl number of Pr = 6.8 for the water working fluid. Velocity and temperature profiles as well as the skin friction coefficient and the local Nusselt number are determined numerically. The influence of pertinent parameters such as nanofluid volume fraction parameter, the ratio of free stream velocity and stretching velocity parameter, the permeability parameter, suction/blowing parameter, and heat source/sink parameter on the flow and heat transfer characteristics is discussed. Comparisons with published results are also presented. It is shown that the inclusion of a nanoparticle into the base fluid of this problem is capable to change the flow pattern.     

Micellar effects on the alkaline hydrolysis of isatin and its derivatives

Herein we have investigated the hydrolysis of 1H-indol-2,3-dione (isatin, I) and its derivatives of different hydrophobicities, viz. N-dimethylaminomethyl indol-2,3-dione (II), N-morpholinomethyl indol-2,3-dione (III), N-pipridinomethyl indol-2,3-dione (IV), N-heptylaminomethyl indol-2,3-dione (V), N-dodecylaminomethyl indol-2,3-dione (VI), N-hexylanilinomethyl indol-2,3-dione (VII), N-decylanilinomethyl indol-2,3-dione (VIII), and N-hexadecylanilinomethyl indol-2,3-dione (IX), in the presence of an excess amount of sodium hydroxide. All the isatin derivatives were synthesized in the laboratory. The progress of the reactions was studied by exploiting UV-visible spectrophotometry. The observed rate constant, k(w), increases linearly on increasing the hydroxide ion concentration, indicating first-order dependence on [OH(-)]. The effects of surfactants, cationic (cetyltrimethylammonium chloride, CTACl), and anionic (sodium dodecyl sulfate, SDS) were also investigated. The rate of reaction increased on increasing the concentration of CTACl and, after reaching a maximum, it started decreasing. Conversely, anionic micelles of SDS inhibited the rate of hydrolysis of isatin and its derivatives. The results of the effect of CTACl were analyzed using a pseudophase ion-exchange model while the inhibition by SDS was analyzed using a simple Menger-Portnoy model. The effects of added salts, such as NaBr, NaCl, and (CH(3))(4)NBr, were also seen on the isatin hydrolysis. It was found that the addition of salts decreased the rate enhancement efficiency of the CTACl.     

Flexo-Ionic Effect of Ionic Liquid Crystal Elastomers

The first study of the flexo-ionic effect, i.e., mechanical deformation-induced electric signal, of the recently discovered ionic liquid crystal elastomers (iLCEs) is reported. The measured flexo-ionic coefficients were found to strongly depend on the director alignment of the iLCE films and can be over 200 µC/m. This value is orders of magnitude higher than the flexo-electric coefficient found in insulating liquid crystals and is comparable to the well-developed ionic polymers (iEAPs). The shortest response times, i.e., the largest bandwidth of the flexo-ionic responses, is achieved in planar alignment, when the director is uniformly parallel to the substrates. These results render high potential for iLCE-based devices for applications in sensors and wearable micropower generators.     

Coadsorption of CO and O on Ir(1 0 0): First principles calculations

Density functional theory (DFT) calculations with generalized gradient approximation (GGA) are performed to investigate the structural, electronic and energetic properties of Ir(1 0 0)-(mCO+nO), m=1, 2; n=1, 2 and 3, coadsorption systems. The stability of coadsorbed oxygen is not affected by the increase of CO coverage from 0.25 ML to 0.50 ML. However, the stability of CO increases by increasing O coverage from 0.25 ML to 0.50 ML and 0.75 ML as a result of the rumpling of the topmost Ir layer.     

Similarity solution of boundary layer stagnation-point flow towards a heated porous stretching sheet saturated with a nanofluid with heat absorption/generation and suction/blowing: A Lie group analysis

In this paper, heat and mass transfer analysis for boundary layer stagnation-point flow over a stretching sheet in a porous medium saturated by a nanofluid with internal heat generation/absorption and suction/blowing is investigated. The governing partial differential equation and auxiliary conditions are converted to ordinary differential equations with the corresponding auxiliary conditions via Lie group analysis. The boundary layer temperature, concentration and nanoparticle volume fraction profiles are then determined numerically. The influences of various relevant parameters, namely, thermophoresis parameter Nt, Brownian motion parameter Nb, Lewis number Le, suction/injection parameter S, permeability parameter k₁, source/sink parameter λ and Prandtl parameter Pr on temperature and concentration as well as wall heat flux and wall mass flux are discussed. Comparison with published results is presented.     

Influence of degree of sulfation on the rheology of cellulose nanocrystal suspensions

The rheology and microstructure of two different cellulose nanocrystals (CNC) samples possessing different degrees of sulfation are studied over a broad concentration range of 1 to 15 wt%. CNC suspensions are isotropic at low concentration and experience two different transitions as concentration increases. First, they form chiral nematic liquid crystals above a first critical concentration where the samples exhibit a fingerprint texture and the viscosity profile shows a three-region behavior, typical of liquid crystals. By further increasing the concentration, CNC suspensions form gels above a second critical concentration, where the viscosity profile shows a single shear-thinning behavior over the whole range of shear rates investigated. It has been found that the degree of sulfation of CNC particles has a significant effect on the critical concentrations at which transitions from isotropic to liquid crystal and liquid crystal to gel occur. Rheological properties and microstructure of these suspensions have been studied using polarized optical microscopy combined with rheometry.     

Magnetoelectric effect in multiferroic NdMn_2O_5

We have measured the dielectric constant for NdMn_2O_5 in an external magnetic field to map out the magnetoelectric phase diagram. The phase diagram corresponds well with the previously reported data of neutron diffraction and magnetic susceptibility. Our main finding is the observation of a dielectric anomaly in the low temperature phase with a strong magnetoelectric effect, which is attributed to the independent Nd~(3+) ordering. Moreover, the absence of the dielectric anomaly in the paramagnetic phase is discussed, keeping in view the exchange interaction and its dependence on the rareearth R~(3+) ionic radius.