KINETIC STUDY OF ALKOXIDE PROMOTED DECOMPOSITION OF ORGANIC PHOSPHONIUM COMPOUNDS Evidence for Hexacovalent Intermediate

Abstract

This study reports rate data of the alkoxide promoted decomposition of triphenyl 3-hydroxypropyl phosphonium chloride, diphenyl di(3-hydroxypropyl)phosphonium chloride, and tetraphenyl phosphonium bromide. Comparison of kinetics, rate constants, and activation parameters of the alkoxide promoted decompositions points to different mechanism as compared to the hydroxyl promoted reaction. The alkoxide reaction is believed to proceed via a hexacovalent intermediate. Reasons for the hexacovalent route are discussed.     

Novel Bis-arylPheDOT Synthons for Electrochromic Polymers

Two terthiophenes incorporating the synthon 3,4-(1,2-phenylenedioxy)thiophene (PheDOT) have been developed. Specifically, 2,5-bisthienyl-3,4-(1,2-phenylenedioxy)thiophene (BTh-PheDOT 1) and 2,5-bisethylenedioxythienyl-3,4-(1,2-phenylenedioxy)thiophene (BEDOT-PheDOT 2) were electropolymerized to form electroactive polymer films (P1 and P2) that switched between two highly colored states with the more electron-rich EDOT derivative P2 observed to switch at a lower potential. Additionally, both P1 and P2 displayed moderate to low optical bandgaps of 1.8 and 1.6 eV, respectively. Crystal structures of BTh-PheDOT showed the monomer to be nearly planar with π -stacking observable between monomers. These findings demonstrate the potential of PheDOT as an electroactive synthon for the formation of well-ordered systems.     

Preparation and Characterization of New Optically Active Poly(amide-imide)s from N,N′-(bicyclo[2,2,2]oct-7-ene-2,3,5,6-tetra carboxylic)-bis-L-isoleucine and Aromatic Diamines

Five new optically active aromatic poly(amide-imide)s (PAIs) 5a–e were prepared from a direct polycondensation reaction of a new diacid of N,N′-(bicyclo[2,2,2]oct-7-ene-2,3,5,6-tetra carboxylic)-bis-L-isoleucine 3 with various aromatic diamines 4a–e in a medium consisting of triphenyl phosphite (TPP), calcium chloride (CaCl₂), pyridine (Py) and N-methyl-2-pyrrolidone (NMP). The polycondensation reaction produced a series of novel poly(amid-imide)s 5a–e in quantitative yields with inherent viscosities of 0.39–0.51 dL/g. The resulting polymers were fully characterized by means of ¹H-NMR, FT-IR spectroscopy, elemental analyses, inherent viscosity, solubility test, specific rotation and thermal properties of them were investigated using TGA/DTG and differential scanning calorimeter (DSC). The diacid 4 was synthesized by the condensation reaction of bicyclo[2,2,2]oct-7-ene-2,3,5,6- tetracarboxylic dianhydride 1 with L-isoleucine 2 in acetic acid solution.     

Preparation of activated carbon filled epoxy nanocomposites

Activated carbon derived from oil palm empty fruit bunch (AC-EFB), bamboo stem (AC-BS), and coconut shells (AC-CNS) were obtained by pyrolysis of agricultural wastes using two chemical reagents (H₃PO₄ or KOH). The AC-EFB, AC-BS and AC-CNS were used as filler in preparation of epoxy nanocomposites. Epoxy nanocomposites prepared at 1, 5 and 10 % activated carbons filler loading using KOH and H₃PO₄ chemical agents. Transmission electron microscopy confirms better dispersion of the nano-activated carbons in the epoxy matrix at 5 % activated carbon. The presence of 5 % AC-CNS in the epoxy matrix using H₃PO₄ chemical reagent resulted in an improvement of the thermal stability of epoxy matrix. KOH treated AC filled epoxy nanocomposites were slightly better in thermal stability as compared to H₃PO₄ treated AC filled epoxy nanocomposites, may be due to better interaction of filler with epoxy matrix. Thermal analysis results showed that thermal stability of the activated carbon filled epoxy nanocomposites improved as compared to the neat epoxy matrix. The degree of crystallinity of epoxy matrix was improved by adding the activated carbon due to interfacial interaction between AC and epoxy matrix rather than loading of AC alone. Developed nanocomposites from biomass (agricultural wastes) materials will help to reduce the overall cost of the materials for its demanding applications as insulating material.     

Thermal investigation of heavy crude oil by simultaneous TG–DSC–FTIR and EDXRF

Present study investigates thermal behavior of two heavy crude oils with different °API values by simultaneous thermogravimetry–differential scanning calorimetry–fourier transform infrared spectroscopy (TG–DSC–FTIR), and an evaluation of the chemical element levels present in the oils’ ashes was done by energy dispersive X-ray fluorescence spectrometry. TG and DSC curves were obtained for two samples in nitrogen atmosphere. Among all inorganic components evaluated, the highest concentration in the two oils was SO₃. Thus this study may contribute to a better understanding of the thermal behavior of heavy crude oils and their composition.     

Dynamic Mechanical Properties of Activated Carbon–Filled Epoxy Nanocomposites

Nano-activated carbons obtained from oil palm empty fiber bunch (AC-EFB), bamboo stem (AC-BS), and coconut shells (AC-CNS) were reinforced in epoxy matrix to fabricate epoxy nanocomposites. The dynamic mechanical analysis of epoxy nanocomposites was carried out, and 5% AC-CNS treated with KOH-filled epoxy composites displayed the highest storage modulus of all the activated carbon–filled epoxy composites. The incorporation of a small amount of AC-BS, AC-EFB, and AC-CNS to the epoxy matrix enhanced the damping characteristics of the epoxy nanocomposites. The 5% AC-EFB treated with H₃PO₄ filled epoxy composites showed the highest glass transition temperature (T_g) in all temperature ranges.     

Synthesis of Some New 1,2,3,4‐Tetrahydropyrimidine‐2‐thione and Their Thiazolo[3,2‐a]pyrimidine,Thiazino and Benzothiazepine Derivatives

The starting N‐(2‐pyridyl)‐6‐methyl‐4‐phenyl‐2‐thioxo‐1,2,3,4‐tetrahydropyrimidine‐5‐carboxamide ( 4 ) was used as a key intermediate for the synthesis of new 1,2,3,4‐tetrahydropyrimidine‐2‐thione and their thiazolo[3,2‐a]pyrimidine, thiazino and benzothiazipen derivatives. The reaction of 4 with haloketones in ethanol catalyzed by base afforded the corresponding thiophenopyrimidine and pyrimidothiazipine derivatives 5 , 6 , 7 , 8 , 9 , 10 . Methylation and formylation of 4 led to the pyrimidine derivatives 15 and 16 , respectively. The preventative compounds were established on the basis of elemental and spectral data.     

Novel Uncatalyzed Hydrocyanation of Ketones utlizing Tetrachlorosilane–Potassium Cyanide Reagent

A combination of tetrachlorosilane and potassium cyanide (in situ trichlorosilyl cyanide) was found to work efficiently for hydrocyanation of ketones to afford the corresponding cyanohydrins in high yield under mild conditions.     

Facile and Efficient Method for the Synthesis of 14-Substituted-14-H-dibenzo[a,j]xanthenes Catalyzed by Ruthenium Chloride Hydrate as a Homogeneous Catalyst

Synthesis of dibenzoxanthenes through condensation of β-naphthol with various aromatic and aliphatic aldehydes in ethanol as an ecofriendly solvent using Ru^III as catalyst is reported.

Statistical and Mathematical Investigations for Determining the Binding Constants of Micelle with Reactants Molecules from Kinetic Data

Binding constants between reactants molecules with micelles are considered to be important parameters particularly in micellar catalysis area. Recently, we developed a statistical method based on multiple linear regression for determining those parameters from kinetic data (Phys. Chem. Liq. 2008, 46, 34–46). In the present work, we derived further two statistical equations from the same original equation using also multiple linear regression method. A substantial difference has been found between the results of those equations and with that of the recently published one. This strongly indicates that the statistical procedures are not valid for such a purpose, that is, the available statistical and graphical methods in the literature are also not suitable for such treatment. A mathematical procedure using iterative method for evaluating the binding constants is introduced. An equation for such treatment has also been derived from the same original equation, and a computer program for this purpose has been written. Application of the developed method to the kinetic data has been found to be quite successful. It has been concluded that the presented mathematical method is simple, reliable, and accurate.