Viscoelasticity,mechanical properties,and in vivo biocompatibility of injectable polyvinyl alcohol/bioactive glass composite hydrogels as potential bone tissue scaffolds

Abstract

An injectable composite hydrogel composed of polyvinyl alcohol (PVA) and bioactive glass (BG) particles were synthesized by a physical crosslinking approach. The morphology, mechanical properties, and viscoelasticity of the PVA/BG composite hydrogel were characterized. Scanning electronic microscopy (SEM) showed uniform and homogeneous distribution of BG particles throughout the composite hydrogel. The incorporation of 2.5?wt% of BG particles in the composite hydrogel formulations, enhanced the static compressive strength and static elastic modulus by 325% and 150%, respectively. The storage molds (G′) was greater than the loss modules (G′′) at all the frequency range studied, which revealed a self-standing elastic composite hydrogel with a smooth injectability. The PVA/BG composite hydrogel was also implanted subcutaneously in the dorsal region of adult male rats. After 4?weeks of implantation, no inflammatory cells were seen within and around the implant, which indicated that the composite hydrogel was biocompatible. The properties of the synthesized injectable PVA/BG composite hydrogel demonstrate its capability toward bone regeneration.     

NMR assay of ephedrine hydrochloride in tablets

A rapid NMR method is described for the determination of ephedrine hydrochloride. The relative standard deviations are 1.5% and 1.2% for the pure drug and tablets respectively. The results for synthetic mixtures and tablets are comparable to those obtained by the B.P. 1973 method. In addition, the NMR spectrum furnishes a specific means of identification of ephedrine.     

Antimalarial activity of n(6)-substituted adenosine derivatives (part 2)

We have investigated the in vitro antimalarial activity of a new series of adenosine derivatives. The results show that N(6)-(1-naphthylmethyl)-5'-deoxy-5'-(amido)adenosines as well as N(6)-(4-phenylbenzyl)-5'-deoxy-5'-(amido)adenosines display significant activity against the malaria-causing parasites, with the sterically demanding bisubstituted species reported being active in most cases in the low-micromolar range. The novel compounds with unusual substitution pattern were obtained applying an efficient convergent polymer-assisted solution-phase (cPASP) synthesis protocol. Thus, we were able to prepare a series of substituted derivatives in parallel that would have been difficult to synthesize by standard techniques. The scope and limitations of the synthetic methodology are discussed.     

Microdetermination of chlorine and bromine in some organic compounds by ion-selective electrodes

Summary The solid state ion-selective chloride and bromide electrodes are used for the microdetermination of chlorine and bromine in organic compounds. After combustion in an oxygen-filled flask, potentiometric titration with silver nitrate at pH 5–7 in presence of 50% dioxan is carried out. Results accurate to ±0.3% absolute are obtained with some partially and highly halogenated compounds.

---

Mikrobestimmung von Chlor und Brom in einigen organischen Verbindungen mit Hilfe von ionenselektiven Elektroden

Zusammenfassung Chlorid- und bromidselektive Festkörperelektroden wurden zur Chlor- und Brombestimmung in teilweise bzw. hochhalogenierten organischen Verbindungen benutzt. Nach Verbrennung im Sauerstoffkolben erfolgt eine potentiometrische Titration mit Silbernitrat bei pH 5–7 in Gegenwart von 50% Dioxan. Die erhaltenen Ergebnisse sind auf ±0,3 % genau.

     

Resorcinol - formaldehyde adsorption of cesium from Hanford waste solutions

Batch equilibrium measurements were conducted at 25±2 °C with a granular resorcinol-formaldehyde (RF) resin to determine the distribution coefficients (K _d ) for cesium. In the tests, Hanford Site actual waste sample containing radioactive cesium (¹³⁷Cs) and a pretreated waste sample that was spiked with non-radioactive ¹³³Cs were used. Initial concentrations of non-radioactive cesium in the waste sample were varied to generate an equilibrium isotherm for cesium. Majority of the tests were conducted at 25±2 °C using a liquid to solid phase ratio of 100 ml/g and at a contact time of 72 hours. Two additional tests were conducted at a liquid to solid phase ratio of 10 and at contact time of 120 hours. The measured distribution coefficient (K _d ) for radioactive cesium (¹³⁷Cs) was 948 ml/g, the K _d for non-radioactive cesium (¹³³Cs) was 1039 ml/g. The K _d for nonradioactive cesium decreased from 1039 to 691 ml/g with increased initial cesium concentration from 8 to 64 g/ml. Very little change of the K _d was observed at initial cesium concentration above 64 g/ml. The maximum sorption capacity for cesium on granular RF resin was 1.17 mmole/g dry resin. This value was calculated from the fit of the equilibrium isotherm data to the Dubinin-Radushkevich equation. Previously, a total capacity of 2.84 mmole/g was calculated by Bibler and Wallace for air-dried RF resin.This work was conducted at the Savannah River Technology Center in Aiken, SC, which is operated for the U. S. Department of Energy (DOE) by Westinghouse Savannah River Company under Contract DE-AC09-96SR18500. The Hanford River Protection Project-Waste Treatment Plant (RPP-WTP) funded this work. The authors are very grateful to Karen Palmer, Betty Mealer, and Yvonne Simpkins for their assistance in the experimental work.     

Microdetermination of phosphorus in organic compounds by indirect spectrophotometric reactions

Summary Organo phosphorus compounds are decomposed by closed-flask combustion. The phosphate ions produced are then converted to phosphomolybdic acid and extracted withiso- butyl acetate. The 12molybdate ions associated with each original phosphate ion are spectrophotometrically determined by reactions with alkaline hydrogen peroxide, hydrogen peroxide and benzidine and gallic acid. The colours are measured at 450, 400 and 400nm respectively.

---

Zusammenfassung Organische Phosphorverbindungen werden im Schöniger-Kolben mineralisiert. Das Phosphat wird zu Phosphormolybdänsäure umgesetzt, miti-Butylacetat extrahiert und dann spektrophotometrisch bestimmt. Dazu bedient man sich der Reaktionen mit alkalischem Wasserstoffperoxid, mit Wasserstoffperoxid und Benzidin oder mit Gallussäure. Die Messungen erfolgen bei 450 nm im ersten Fall, bei 400 nm im Fall der beiden letztgenannten Farbreaktionen.

---

---

This paper is taken from the Master's Thesis of S. A. I. Thoria.     

Composition-controlled synthesis of bimetallic gold-silver nanoparticles

This paper reports findings of an investigation of the synthesis of monolayer-capped binary gold-silver (AuAg) bimetallic nanoparticles that is aimed at understanding the control factors governing the formation of the bimetallic compositions. The synthesis of alkanethiolate-capped AuAg nanoparticles was carried out using two related synthetic protocols using aqueous sodium borohydride as a reducing agent. One involves a two-phase reduction of AuCl(4)(-), which is dissolved in organic solution, and Ag(+), which is dissolved in aqueous solution. The other protocol involves a two-phase reduction of AuCl(4)(-) and AgBr(2)(-), both of which are dissolved in the same organic solution. AuAg nanoparticles of 2-3 nm core sizes with different compositions in the range of 0-100% Au have been synthesized. The two synthetic routes were compared in terms of bimetallic composition and size properties. Our new findings have allowed us to establish the correlation between synthetic feeding of metals and metal compositions in the bimetallic nanoparticles, which have important implications to the exploration of gold-based bimetallic nanoparticles for constructing sensing and catalytic nanomaterials.     

Theoretical study of the reaction of alkynes with furan catalyzed by AuCl3 and AuCl

A general scheme for the endo‐ and exo‐cyclization of furan reactivity with [L ‐Au^{III, I}Cl_x] with (x = 3, 1 and L ‐acetylene and vinylidene) complexes is investigated using density functional theory (DFT) code. Two conceivable mechanisms via a [4 + 2] Diels–Alder process or carbene complex are analyzed. According to the activation energy values of the gold (III and I) catalyst, the first mechanism, which implies the Diels–Alder reaction of Au^III, is thermodynamically favored and gives more evidence of the intramolecular addition of the furan with the alkynes. The second mechanism, presumably assisted by the spontaneous formation of the exo‐vinylidene complexes and intermediates of gold (III, I) by forming the carbene complex, is kinetically favored. Additionally, we compare our results with other structures with intramolecular additions that exhibit the quasi‐similarity of gold analogue structures. Differences in activation energies are observed, according to the functional used. Finally, we probe the solvent effects, which decrease the energy barrier in the path. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007     

Synergism in the solvent extraction of samarium by thenoyltrifluoroacetone and triphenyl or trioctyl phosphine oxide mixture

Synergistic extraction of samarium with TTA(HA) and TPPO or TOPO (B) mixtures were investigated. The extracted complex was proved to have the general formula SmA₃ · 2B. A graphical determination for the formation constants of these complexes gave the values 3.9 × 10¹³ and 8.2 × 10¹⁰ for SmA₃ · 2TOPO and SmA₃ · 2TPPO in benzene, respectively.     

Evaluating the residence time for cesium removal from simulated Hanford tank wastes using SuperLig® 644 resin

Batch contact and column experiments were performed to evaluate the effect of residence time on cesium removal from two simulated Hanford tank wastes using SuperLig^® 644 resin. The two waste simulants mimic the compositions of tanks 241-AZ-102 and 241-AN-107 at the U.S. Department of Energy (DOE) Hanford site. A single column made of glass tube (2.7-cm i.d.), which contained ~100 ml of H-form SuperLig^® 644 resin was used in the column experiments. The experiments each consisted of loading, elution, and regeneration steps were performed at flow rates ranging from 0.64 to 8.2 BV/h for AZ-102 and from 1.5 to 18 BV/h for AN-107 simulant. The lowest flow rates of 0.64 and 1.5 BV/h were selected to evaluate less than optimal flow conditions in the plant. The range of the flow rates is consistent with the River Protection Project design for the waste treatment plant (WTP) columns, which will operate at a flow rate between 1.5 to 3 BV/h. Batch contact experiments were also performed for two batches of SuperLig^® 644 to determine the equilibrium distribution coefficients (K _d) as a function of Cs concentration. The column experiments revealed that adequate column loading for Cs on SuperLig^® 644 (50% breakthrough at 100 bed volumes) can be achieved for the two simulated Hanford tank wastes at the nominal plant flow rates of 1.5 and 3 BV/h (residence times 40 and 20 minutes). The column performance was marginally improved at flow rates below the nominal rates. At flow rates higher than the nominal, the Cs loading deteriorated significantly. The SuperLig^® 644 was eluted effectively with 0.5M nitric acid. The elution required approximately 15 BVs to reduce Cs concentration to below 1% of initial Cs concentration in the feeds.