Positive heterotropic cooperativity for selective guest binding via electronic communications through a fused zinc porphyrin array

Upon binding with C60 and diamines, such as 4,4'-bipyridine (bpy) and N,N,N',N'-tetramethylhexane-1,6-diamine (TMHDA), cyclic host 1 possessing two electronically coupled binding sites displays negative homotropic cooperativity and positive heterotropic cooperativity, and their ternary mixtures preferentially form inclusion complexes with hetero-guest pairs 1 supersetC60*bpy and 1 supersetC60*TMHDA under appropriate conditions. Spectroscopic titration profiles in toluene at 20 degrees C demonstrated that the association constants (Kassoc) of C60 with monodiamine complexes 1 supersetbpy (2.8 x 105 M-1) and 1 supersetTMHDA (1.5 x 105 M-1) are 8.5 and 4.5 times greater than that of C60 with guest-free 1 (3.3 x 104 M-1), respectively. On the other hand, mono-C60 complex 1 supersetC60 was 6.1 times more accessible than guest-free 1 toward TMHDA. Absorption spectroscopy in the absence of 1 indicated no direct interaction between C60 and diamines.     

Nucleophilic aromatic substitution reactions of fluorobenzenechromium complexes with P-chiral secondary phosphine-boranes: synthesis of optically pure P-chiral (dialkyl)arylphosphine-boranes

Optically pure P-chiral (dialkyl)arylphosphine-boranes having high structural diversity were prepared by two- or three-component coupling of fluorobenzenechromium complexes, P-chiral secondary phosphine-boranes, and other nucleophiles. The stereochemical integrity at the P-stereogenic center was completely retained during the S_NAr process when the reaction was carried out in THF at low temperature.     

Side chain-directed assembly of triangular molecular panels into a tetrahedron vs. open cone

Despite their structural similarity, triangular tetradentate ligands 2b and 2c experience different assembly pathways on complexation with (en)Pd(NO3)2 to give M8L4 tetrahedral (3) and open cone (4) structures, respectively, due to steric restriction by side chains at the corner or on the edge of the ligands.     

Super acid-induced Pummerer-type cyclization reaction: improvement in the synthesis of chiral 1,3-dimethyl-1,2,3,4-tetrahydroisoquinolines

Improved synthesis of four stereoisomeric chiral 1,3-dimethyl-1,2,3,4-tetrahydroisoquinolines (1a, b, ent-1a, b) was achieved via the super acid-induced cyclization of chiral N-[1-methyl-2-(phenylsulfinyl)ethyl]-N-(1-phenylethyl)formamides (4a, b, ent-4a, b) using the Pummerer-type cyclization reaction as a key step. The cyclization leading to the isoquinoline ring proceeded in a quantitative manner when trifluoromethane sulfonic acid (TFSA) was used as the super acid, although Friedel-Crafts-type alkylation of 4-phenylsulfanyl TIQ derivatives (5) with benzene used as the solvent accompanied cyclization to yield the 4-phenyl-TIQs (7). The byproduct (7) was exclusively formed when a large excess amount of TFSA was used.     

New optically active organoantimony (BINASb) and bismuth (BINABi) compounds comprising a 1,1′-binaphthyl core: synthesis and their use in transition metal-catalyzed asymmetric hydrosilylation of ketones

Racemic 2,2′-bis[diarylstibano]-1,1′-binaphthyls [(±)-BINASbs] and 2,2′-bis[di(p-tolyl)bismuthano]-1,1′-binaphthyl [(±)-BINABi], which are the antimony and bismuth congeners of BINAP, have been prepared from 2,2′-dibromo-1,1′-binaphthyl (DBBN) via 2,2′-dilithio-1,1′-binaphthyl intermediate by treatment with the appropriate metal halides [(p-Tol)₂SbBr, Ph₂SbBr and (p-Tol)₂BiCl]. The optical resolution of the (±)-BINASbs could be achieved via the separation of a mixture of the diastereomeric Pd-complexes derived from the reaction of (±)-BINASbs with di-μ-chlorobis{(S)-2-[1-(dimethylamino)-ethyl]phenyl-C¹,N}dipalladium(II). Optically active (R)-BINASb and (R)-BINABi could be also obtained from optically active (R)-DBBN by the same procedure. The enantiopure BINASbs have been shown to be effective chiral ligands for the rhodium-catalyzed asymmetric hydrosilylation of ketones.     

Hydrogen evolution from water by use of viologen polymers as electron transfer catalyst

The behavior of viologen polymer (P-V²⁺) as an electron transfer catalyst in the reaction of hydrogen generation was studied. In the photoirradiation system, which contains triethanolamine (TEA), Ru(bpy)³⁺₃, and P-V²⁺, the amount of hydrogen evolution was less than methyl viologen (MV²⁺); P-V²⁺, however, was more effective in sodium dithionite as the electron donor and showed higher initial rates than MV²⁺.     

Kinetic study of the electron-transfer oxidation of the phenolate anion of a vitamin E model by molecular oxygen generating superoxide anion in an aprotic medium

Electron-transfer reduction of molecular oxygen (O2) by the phenolate anion (1-) of a vitamin E model, 2,2,5,7,8-pentamethylchroman-6-ol (1H), occurred to produce superoxide anion, which could be directly detected by a low-temperature EPR measurement. The rate of electron transfer from 1- to O2 was relatively slow, since this process is energetically unfavourable. The one-electron oxidation potential of 1- determined by cyclic voltammetric measurements is sufficiently negative to reduce 2,2-bis(4-tert-octylphenyl)-1-picrylhydrazyl radical (DOPPH*) to the corresponding one-electron reduced anion, DOPPH-, suggesting that 1- can also act as an efficient radical scavenger.     

On the characterization of generalized inverses by bordered matrices

A method to characterize the class of all generalized inverses of any given matrix A is considered. Given a matrix A and a nonsingular bordered matrix T of A,

$\text{T=}\text{A}\text{P}\text{Q}\text{R}$

the submatrix, corresponding to A, of T^-1 is a generalized inverse of A, and conversely, any generalized inverse of A is obtainable by this method. There are different definitions of a generalized inverse, and the arguments are developed with the least restrictive definition. The characterization of the Moore-Penrose inverse, the most restrictive definition, is also considered.     

Grinding-induced equimolar complex formation between thiourea and ethenzamide

We prepared and characterized a grinding-induced equimolar complex of thiourea with ethenzamide. When thiourea and ethenzamide were co-ground at a molar ratio of 3 : 1, new powder X-ray diffraction (PXRD) peaks were observed in addition to PXRD peaks of thiourea crystals. The optimum stoichiometry of the new structure was confirmed as 1 : 1 mol/mol. Effect of grinding time on the thiourea-ethenzamide equimolar complex formation was investigated by using PXRD, differential scanning calorimetry and Fourier transform infrared spectroscopy. The equimolar crystal structure was confirmed by X-ray diffraction measurements of the single crystal which was recrystallized from ethanol. It was found that the intermolecular hydrogen bond formations between thiourea and ethenzamide molecules contributed to the equimolar complex formation. The complex formation was not observed in the cases where benzamide, salicylamide or 3-ethoxybenzamide was co-ground with thiourea. 2-Alcoxyl benzamide structures should be required for the grinding-induced equimolar complex formation with thiourea.     

Ring‐Opening Reactions of 3‐Aryl‐1‐benzylaziridine‐2‐carboxylates and Application to the Asymmetric Synthesis of an Amphetamine‐Type Compound

Nucleophilic ring‐opening reactions of 3‐aryl‐1‐benzylaziridine‐2‐carboxylates were examined by using O‐nucleophiles and aromatic C‐nucleophiles. The stereospecificity was found to depend on substrates and conditions used. Configuration inversion at C(3) was observed with O‐nucleophiles as a major reaction path in the ring‐opening reactions of aziridines carrying an electron‐poor aromatic moiety, whereas mixtures containing preferentially the syn‐diastereoisomer were generally obtained when electron‐rich aziridines were used (Tables 1–3). In the reactions of electron‐rich aziridines with C‐nucleophiles, S_N2 reactions yielding anti‐type products were observed (Table 4). Reductive ring‐opening reaction by catalytic hydrogenation of (+)‐trans‐(2S,3R)‐3‐(1,3‐benzodioxol‐5‐yl)aziridine‐2‐carboxylate (+)‐trans‐ 3c afforded the corresponding α‐amino acid derivative, which was smoothly transformed into (+)‐tert‐butyl [(1R)‐2‐(1,3‐benzodioxol‐5‐yl)‐1‐methylethyl]carbamate((+)‐ 14 ) with high retention of optical purity (Scheme 6).