Simple and rapid determination of hydrogen peroxide using phosphine-based fluorescent reagents with sodium tungstate dihydrate.

A simple batch method for the fluorometric determination of hydrogen peroxide using phosphine-based fluorescent reagents has been developed. A rapid, mild and selective derivatization reaction was achieved by adding sodium tungstate dihydrate to the reaction mixture of hydrogen peroxide and a phosphine-based fluorescent reagent. When 4-diphenylphosphino-7-methylthio-2,1,3-benzoxadiazole was used as a reagent, the derivatization reaction was completed after 2 min at room temperature. The calibration curve was linear between 12.5 and 500 ng hydrogen peroxide in a 10 microL sample solution. This method is accurate and has potential for on-line applications.     

Tristimulus colorimetry using a digital still camera and its application to determination of iron and residual chlorine in water samples.

Tristimulus colorimetry using a digital still camera (DSC) as a colorimeter has been developed. A photograph of a sample and standard solutions was taken simultaneously with the DSC, and it was transferred to a PC. On the PC, the colors of the sample and of the standard solutions were analyzed and L* (brightness), a* (red-green component), and b* (yellow-blue component) values were determined with laboratory-made software. A dedicated light-box containing white-color LEDs as light source was made of white acrylic to make constant exposure at each photograph. Various settings of the DSC, such as exposure mode, white balance, and so on, that affect analytical figures, were studied with determination of iron with 1,10-phenanthroline. This method was successfully applied to the determinations of iron in a river water sample and of residual chlorine in tap water samples with N,N-diethylphenylenediamine (DPD).     

Separation of fulvic acid from soil extracts based on ion-pair formation with a cationic surfactant.

A novel method for separating fulvic acid (FA) from soil extracts is proposed. The FA, defined as the acid-soluble fraction of an alkaline extract of soil, was separated based on the precipitation of an ion-pair with a cationic surfactant, such as domiphen bromide. The precipitate was dissolved in aqueous HCl to produce H+ -type FA and a surfactant chloride (SUR-Cl). SUR-Cl, in the aqueous solution, was removed by extraction with CHCl3. After the aqueous phase was passed through a cation-exchanger (H+ -type), H+ -type FA (FA-SUR) was obtained as a powder by lyophylization. The chemical characteristics of FA-SUR were compared with an FA sample separated according to the method of the International Humic Substances Society using a DAX-8 resin (FA-DAX). The oxygen content, O/C atomic ratio and total acidity of the FA-SUR were significantly larger than the corresponding values for FA-DAX. The solid-state CPMS 13C NMR spectra indicated that the higher oxygen content of the FA-SUR could be due to alcoholic hydroxyl groups and polysaccharides as well as carboxylic groups. These results show that FA-SUR is more polar and hydrophilic than FA-DAX.     

Chemical and biological modification of bleomycin,an antitumor antibiotic

Dedicated to Professor John C. Sheehan on the occasion of his sixty-fifth birthday. Chemical and biological modifications of bleomycin, an antitumor glycopeptide antibiotic, have been achieved by three procedures analogous to the modifications of penicillin.     

Factors affecting polyhydroxybutyrate biosynthesis in the marine photosynthetic bacteriumRhodopseudomonas sp. strain W-1S

Applied Biochemistry and Biotechnology - A marine photosynthetic bacterium,Rhodopseudomonas sp. strain W-1S, accumulated polyhydroxybutyrate (PHB) to 56% of the dry cell weight under microaerobic...     

Enzyme-less amperometric biosensor for l-ascorbate using poly-l-histidine-copper complex as an alternative biocatalyst

A poly-l-histidine(PLH)-copper(II) complex can be used as an alternative biocatalyst in an O(2) detection-type amperometric enzyme-less l-ascorbate (AsA) sensor. The PLH-Cu(II) membrane was simply prepared by entrapping the PLH in polyacrylamide gel and subsequent treatment of the gel with CuCl(2) solution. This enzyme-less biosensor can be used over a relatively wide pH region from 4 to 11 and enables precise determination of AsA (RSD less than 3%, n=10) at pH 7.0. The fundamental performance characteristics (sensitivity, response time, and linear range) of this PLH-Cu(II)-based sensor is comparable to those of a native ascorbate oxidase-based sensor. Unfortunately, the selectivity is inherently rather low and, as a result, the response was degraded in the presence of higher concentrations (more than mM order) of quinones. However, reducing sugars caused no interference and the sensor could be used to detect AsA in some fruits and drinks. This enzyme-less sensor has excellent stability for at least 3 months of repeated analysis (more than 300 samples) without loss of ordinal activity.     

Local dynamic mechanical properties in model free-standing polymer thin films

High-frequency sinusoidal oscillations of a coarse-grained polymer model are used to calculate the local dynamic mechanical properties (DMPs) of free-standing polymer thin films. The storage modulus G(') and loss modulus G(") are examined as a function of position normal to the free surfaces. It is found that mechanically soft layers arise near the free surfaces of glassy thin films, and that their thickness becomes comparable to the entire film thickness as the temperature approaches the glass transition T(g). As a result, the overall stiffness of glassy thin films decreases with film thickness. It is also shown that two regions coexist in thin films just at the bulk T(g); a melt-like region (G(')G(")) in the middle of the film. Our findings on the existence of a heterogeneous distribution of DMPs in free-standing polymer thin films provide insights into recent experimental measurements of the mechanical properties of glassy polymer thin films.     

Polymerization of vinyl acetate in fatty acids and properties of poly (vinyl alcohols) derived from the poly (vinyl acetates)

Polymerization of vinyl acetate (VAc) in various fatty acids (carbon numbers 4–18) was carried out. Chain transfer constants to the acids were determined to be 20–35×10^–4, from which the constant to a methylene group was obtained to be 0.73×10^–4. Viscometry in aqueous solution of derived poly (vinyl alcohol) (PVA) showed the usual behavior in terms of Huggins constant obtained by the Schulz–Blaschkes equation for PVAs derived from fatty acid systems lower than hexadecanoic acid. PVA derived from octadecanoic acid system showed abnormality, indicating association of alkyl groups. Contact angles on surfaces of PVAs cast from aqueous solutions were measured. While those of PVA derived from lower acid systems were 62°, those of PVAs derived from higher aids were higher and increased to 92° with increase in carbon number to octadecanoic acid. Alkyl groups in the PVAs were estimated to appear on the surfaces. Surface tension of aqueous solution of the PVA derived from octadecanoic acid showed high surface activity, and depended on pH of the solution, indicating the presence and cleavage of lactone ring at the combined portion between PVA and the acid.